Jasco 45233 - Manuals

7 3. Set Channelswitch on camerato 1 or 2. Slide thecamera onto the locking pins of the mounting plate. 4. Adjust antenna and camera angle as needed for the clearest picture. OPTIONAL WIRELESS BATTERY PACK AVAILABLE (SOLD SEPARATELY) Rechargeable NiMH Battery is available for use with the 45233 Wire...

8 TROUBLE SHOOTINGIf you are having trouble operating this product, please consult the guide below. If you have any questions or feel the camera system is notoperating correctly, or you simply need additional information, please visit our web sitewww.jascoproducts.com, or contact our Customer Servic...

9 Interference on camera picture 1. Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal. 2. Try repositioning the camera, monitor (receiver) or both to improve the reception quality. 3. If a camera is positioned close to the monitor, point ante...

10 High-Speed Electronic Shutter ................. 1/60 - 1/15,000 secImage Sensor ........................................................................ 1/3” CMOSMin. Illumination .................. 0 lux up to 3 ft, 0.5 lux up to 10 ft Voltage .......................................................

11 FCC STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate...