Jasco 24702 - Manuals

2 INSTALLATION Step 1: Take out the antenna main unit. Step 2: Connect the power inserter to your Set Top Box (or TV) with the F-Male connector. Step 3: Take the coaxial cable that attached on the antenna, and connect it to the power inserter. Step 4: Take out the power adaptor; connect the barrel e...

3 Antenna placement with mounting base: § Before the following step, please make sure that you have enough protection when you try to drill on wall to install the antenna. § Please check the signal reception and make sure you can get a good signal at the location where you are going to install the...

4 SPECIFICATIONS Antenna Frequency VHF: 47 MHz ～ 230 MHz UHF: 470 MHz ～ 870MHz Amp Gain VHF: 21 dB ±3dB UHF: 19 dB ±3dB O/P Return Loss < - 6dB NF < 2 dB RF Output Impedance 75 Ohm Power Adapter AC120V / DC9V / 200mA (CEC Level IV) RF Cable F (Male), Length 180cm x 1, RG-174/U Power inserter F...