Jasco 19242 - Manuals

Jasco 19242 – Manual in PDF format online.

Manuals:

Manual Jasco 19242

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9

Summary

Page 3 - Setting The House Security Code; Locate the House Security Code door and screw located on the

- Pushbutton Dip Switches and Jumpers Setting The House Security Code Each chime component has 4 jumpers for setting the house security code. In most cases you will not need to change the factory settings for the house security code. If your chime activates intermittently or does not work at all, yo...

Page 4 - Locate the chime and pushbutton jumpers shown below.; To change the house code, add or remove jumpers as needed. It is

back of the chime (See the chime components picture above). Remove the screw and take off the door. 4. Locate the chime and pushbutton jumpers shown below. Chime and Pushbutton Jumpers 5. To change the house code, add or remove jumpers as needed. It is recommended to change only one jumper at a time...

Page 5 - Push Button Mounting Instructions; Avoid mounting on metal surfaces, as it may result in a reduced; a. Removing the back cover

Push Button Mounting Instructions Note: Avoid mounting on metal surfaces, as it may result in a reduced range of transmission. Do not mount in an area where exposed to direct rain. a. Removing the back cover b. Replacing the back cover 1. Push buttons are typically mounted at the same height as the ...

Jasco Manuals