Jackson Whirl Wizard - Manuals

Page 2 - MANUFACTURERS WARRANTY

ALL NEW JACKSON DISHWASHERS ARE WARRANTED TO THE ORIGINAL PURCHASER TO BE FREE FROMDEFECTS IN MATERIAL OR WORKMANSHIP, UNDER NORMAL USE AND OPERATION FOR A PERIOD OF (1) ONEYEAR FROM THE DATE OF PURCHASE, BUT IN NO EVENT TO EXCEED (18) EIGHTEEN MONTHS FROM THE DATEOF SHIPMENT FROM THE FACTORY. Jacks...

Page 5 - ii; NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL

ii NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL AJ-54CE AJ = AJ Series of rack conveyors 54 = 54” wide machine from tub edge to tub edge76 = 76” wide machine from tub edge to tub edge90 = 90” wide machine from tub edge to tub edge CE = Electrically-heated, hot water sanitizing dishmachineCS = ...

Page 6 - TABLE OF CONTENTS

SECTION DESCRIPTION PAGE I. GENERAL Specifications 2 Dimensions 3 II. INSTRUCTIONS SECTION Installation Instructions 5 Operating Instructions 7 III. PREVENTATIVE MAINTENANCE 9 IV. PARTS SECTION Installation Assembly 11 Main Assembly 12 V. ELECTRICAL DIAGRAM 115 Volt, 60 Hertz, Single Phase 14 230 Vo...

Page 7 - SPECIFICATION INFORMATION

Page 8 - SECTION 1: SPECIFICATION INFORMATION

This unit can be adapted to most standard three compartment sink to provide recirculated water to assist in the removal of soilfrom ware. The entire unit will fit within the frame work of standard sinks, so no additional floor space is required. For the 115 Volt unit, a one (1) horsepower motor and ...

Page 11 - SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

VISUAL INSPECTION: Before installing the unit, check the container and machine for damage. A damaged container is an indi- cator that the machine may have been hadled roughly during shipping. If there is damage to both the container and themachine, do not throw away the container. The machine has be...

Page 14 - PREVENTATIVE MAINTENANCE

Page 15 - SECTION 3: PREVENTATIVE MAINTENANCE

The dishmachines covered in this manual are designed to operate with a minimum of interaction with the operator. However,this does not mean that some items will not wear out in time. Jackson highly recommends that any maintenance and repairsnot specifically discussed in this manual should be perform...

Page 16 - PARTS SECTION

Page 17 - SECTION 4: PARTS SECTION

ITEM QTY DESCRIPTION Mfg. No. 1 1 Directional Manifold 05700-031-70-49 2 1 Main Flow Chamber 05700-031-83-05 3 1 Rubber Washer, 3-1/2" Diameter 05330-011-70-87 4 1 Fiber Washer, 3-1/2" Diameter 05330-011-70-48 5 1 Flange, Back-Up 05340-011-83-13 6 1 Mounting Flange 05340-011-83-14 7 1 Spring...

Page 19 - ELECTRICAL DIAGRAMS

Page 20 - SECTION 5: ELECTRICAL SCHEMATICS

Whirl Wizard Technical Manual 7610-011-70-65 Issued: 08-20-2007 Revised: N/A SECTION 5: ELECTRICAL SCHEMATICS WHIRL WIZARD 115 VOLT - 60 HZ - SINGLE PHASE 14 9905-011-70-30 SEQUENCE OF OPERATION 1. After the sink is filled with water, power switch (S1) is placed in the “ON” position. 2. Motor contac...

Page 23 - SECTION 6: JACKSON MAINTENANCE & REPAIR CENTERS

ALABAMA JONES-McLEOD APPLIANCESVC 1616 7TH AVE. NORTHBIRMINGHAM, AL 35203(205) 251-0159800-821-1150FAX: (205) [email protected] JONES-McLEOD APPLIANCESVC 854 LAKESIDE DRIVEMOBILE, AL 36693(251) 666-7278800-237-9859FAX: (251) 661-0223 ALASKA RESTAURANT APPLIANCESERVICE 7219 ROOSEVELT W...