Jackson 10A - Manuals

Jackson 10A – Manual in PDF format online.

Manuals:

Manual

Manual Jackson 10A

Summary

Page 2 - MANUFACTURERS WARRANTY; ONE YEAR LIMITED PARTS & LABOR WARRANTY; TRAVEL LIMITATIONS

MANUFACTURERS WARRANTY ONE YEAR LIMITED PARTS & LABOR WARRANTY ALL NEW JACKSON DISHWASHERS ARE WARRANTED TO THE ORIGINAL PURCHASER TO BE FREE FROMDEFECTS IN MATERIAL OR WORKMANSHIP, UNDER NORMAL USE AND OPERATION FOR A PERIOD OF (1) ONEYEAR FROM THE DATE OF PURCHASE, BUT IN NO EVENT TO EXCEED (1...

Page 3 - MAW

i REVISION REVISION DATE MADE BY APPLICABLE ECN DETAILS D 02-24-04 MAW N/A ADDED 10U PHOTO INSTALLATION GUIDE AND ALL 10UINFORMATION

Page 5 - iii

iii TABLE OF CONTENTS SECTION DESCRIPTION PAGE I. SPECIFICATION INFORMATION Operating & Electrical Requirements 2 10A Dimensions 3 10AB/10APRB/10U Dimensions 4 Table Dimensions 5 II. INSTALLATION/OPERATION INSTRUCTIONS Visual Inspection/Unpacking the Dishmachine 7 Leveling the Dishmachine/Instal...

Page 6 - SPECIFICATION INFORMATION

Page 8 - All dimensions in inches.; TOP VIEW

3 SECTION 1: SPECIFICATION INFORMATION 10A DIMENSIONS NOTES: A - Water inlet 1/2” NPT. Plumbing can be directed either left orright.B - Drain connection 1 1/2” NPTC - Electrical connectionD - Clearance for dishes: 10” (10A 4” shorter hood)14” (10A standard hood)19” (10A 5” higher hood) E - Machine h...

Page 9 - SECTION 1: SPECIFICATION INFORMATION

4 SECTION 1: SPECIFICATION INFORMATION 10AB/10APRB/10U DIMENSIONS NOTES: A - Water inlet 1/2” NPT. Plumbing can be directed either left orright.B - Drain connection 1 1/2” NPTC - Electrical connectionD - Clearance for dishes: 10” (10U/10AB/10APRB 4” shorter hood)14” (10A/10AB/10APRB standard hood)19...

Page 10 - Legend; A - 10” High backsplash, 2” turnback at 45

5 SECTION 1: SPECIFICATION INFORMATION 10 SERIES TABLE DIMENSIONS 10 1X PACKAGE 10 2X PACKAGE 10 3X PACKAGE Legend A - 10” High backsplash, 2” turnback at 45 B B - 3” High, 1 1/2” diameter rolled edgeC - Scrap blockD - Scrap basket with slide barsE - 20” x 20” x 5” deep pre-rinse sinkF - Heavy duty ...

Page 12 - Before installing the unit, check the; do not; throw away the container. The dishmachine; UNPACKING THE DISHMACHINE:

7 SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Jackson MSC Inc. provides technical support for all of the dishmachines detailed in this manual. We strongly recommend thatyou refer to this manual before making a call to our technical support staff. Please have this manual ...

Page 13 - The dishmachine is designed to operate while being level.; INSTALLING THE DISHMACHINE:; With the machine base set in place,; INSTALLING THE VACUUM BREAKER & PLUMBING:; Ease

8 SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONS LEVEL THE DISHMACHINE: The dishmachine is designed to operate while being level. This is important to prevent any damage to the machine during operation and to ensure thebest results when washing ware. The unit comes with adj...

Page 14 - Insert internal vacuum; INSTALLING THE HOOD ASSEMBLY:; Make sure there are two “O-

9 SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONS ALIGNING THE MACHINE: Adjust the machine base to line up hole in table with hole in support block (Fig. 11). (Fig. 11) INSTALLING THE INTERNAL VACUUM BREAKER: Insert internal vacuum breaker pipe into hood support block pin en...

Page 15 - Ensure that the power switch is in the OFF position

10 SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONS PLUMBING THE DISHMACHINE: All plumbing connections must comply with all applicable local, state, and national plumb- ing codes. The plumber is responsible for ensuring that the incoming water line is thoroughly flushed prior...

Page 17 - Ensure that the wash and rinse arms are installed and secure.; DAILY MACHINE PREPARATION:

SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS PREPARATION: 1. Ensure that the pump intake strainer (1) and basket overflow strainer (2) areinserted and tight. 2. Ensure that the wash and rinse arms are installed and secure. 3. Remove all solid wastes in order to avoid obstruc...

Page 19 - PREVENTATIVE MAINTENANCE

Page 20 - To remove all lime and corrosion deposits.

15 SECTION 3: PREVENTATIVE MAINTENANCE PREVENTATIVE MAINTENANCE Proper maintenance of your Jackson dishmachine will insure optimum service with a minimum of down time. 1. To delime the booster tank. a. Remove the support pipe nut and lift the whole hood assembly away from the unit.b. Loosen the fitt...

Page 21 - ELECTRICAL SCHEMATICS

Page 22 - SECTION 4: ELECTRICAL SCHEMATICS

17 SECTION 4: ELECTRICAL SCHEMATICS 10A, 10AB/10U, 10APRB L1 L2 TERMINALBOARD #1 CUSTOMERSERVICE 15 AMP RATING CIRCUIT BREAKER ½ HP 5.3 AMPS WASHMOTOR WASHHEATER 09905-002-57-63 A 10A 208/220V 1 PHASE 630 WATTS L1 RINSEHEATERS 6900 WATTS L2 15 AMP RATING CIRCUIT BREAKER ½ HP 5.3 AMPS WASH MOTOR 630 ...

Page 33 - CANADA

28 SECTION 5: JACKSON MAINTENANCE & REPAIR CENTERS TEXAS TO WYOMING/CANADA TEXAS (cont.): COMMERCIAL KITCHENREPAIR CO. 1377 N BRASOS P.O BOX 831128 SAN ANTONIO, TX 78207 (210) 735-2811 800-292-2120 FAX: (210) [email protected] GCS SERVICE INC. 440 WRANGLER DRIVE #100COPPELL, TX...