Jackson 07610-003-13-91 A - Manuals

Jackson 07610-003-13-91 A – Manual in PDF format online.

Manuals:

Manual

Manual Jackson 07610-003-13-91 A

Summary

Page 2 - Warning: many of the instructions and steps within; PREPARATION

Many dishmachines comes with integral booster tanks to ensure proper temperature of the final rinse. Jackson has predom-inantly used two manufacturers of thermostats, EGO and Stemco.These instructions are for use with kit 06401-003-13-94, which isto replace an EGO rinse regulating thermostat with a ...

Page 4 - AFTER MAINTENANCE ACTIONS; Once the new thermostat is installed, it will be necesary to

www.jacksonmsc.com Rinse RegulatingThermostat Replacement Instructions Revision A (11/16/2005) 4 8. Use the 7/16” combination wrench to tighten down the brass fit-ting, while also positioning the new thermostat so that it does nothang over the heater. 9. Note: regardless of the unit this is being do...

Page 5 - on the machine data plate for every cycle.; SPECIAL NOTES; Work performed on Jackson dishmachines by unautho -; SPECIAL PARTS; jumper wires and instructions.; CONTACT INFORMATION; Jackson MSC Inc. provides technical support for all of the

on the machine data plate for every cycle. SPECIAL NOTES Work performed on Jackson dishmachines by unautho - rized or unqualified personnel may void the warranty. Before begin -ning this or any other maintenance evolution on a unit under war-ranty, you should contact a certified Jackson technician o...