Page 3 - Table of Contents
SP-CEIL-012 Installation Manual Page - 3 - Table of Contents Warning Statements ............................................................................................................................................- 4 - Parts List ..................................................................
Page 4 - Warning Statements; Warning and Caution statements.
SP-CEIL-012 Page - 4 - Installation Manual Warning Statements WARNING: THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE (5) TIMES THE WEIGHT OF THE PROJECTOR. IF NOT, THE CEILING MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE ...
Page 5 - Parts List
SP-CEIL-012 Installation Manual Page - 5 - Parts List NOTE: This mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation...
Page 6 - Ceiling and Wall Installation; Unpack the Gyrolock; NOTE; Figure 1; . Single Stud Installation
SP-CEIL-012 Page - 6 - Installation Manual Ceiling and Wall Installation Unpack the Gyrolock ® and review any WARNING statements that apply to the installation. Select the desired location for the Gyrolock ® . There are three mounting points for a single stud installation and four mounting points fo...
Page 7 - Adjustable Height; Height Adjustment; Figure
SP-CEIL-012 Installation Manual Page - 7 - Adjustable Height 1. Screw the fully threaded nipple all the way into the secured top plate. Use the jam screw (supplied) to secure the pipe (Figure 2). 2. Screw the PBC coupling all the way onto the threaded nipple or (optional) 1-1/2" pipe and secure ...
Page 8 - Adjustments and Extension Arm; Contact InFocus for extensions.; Figure 4
SP-CEIL-012 Page - 8 - Installation Manual Adjustments and Extension Arm SP-EXTARM-01 SP-EXTARM-02 SP-EXTARM-03 SP-EXTARM-04 Contact InFocus for extensions. Adjustments • Roll & pitch greater than ± 20 ° from center. • Quick positive release with positive security lock. • 360 ° yaw. • Cables can...
Page 9 - Mount Installation; Invert the projector and place it on a soft and flat; Figure 5; Install the base box securely to the ceiling; Figure 6
SP-CEIL-012 Installation Manual Page - 9 - Mount Installation 1. Invert the projector and place it on a soft and flat surface. Locate the three (3) 6 (mm) mounting points found on the bottom of the projector. 2. Secure the mounting bracket using the three (3) 6 (mm) x 12 (mm) Phillip Head screws (su...
Page 10 - Figure 7
SP-CEIL-012 Page - 10 - Installation Manual 1. Install the two (2) conical spacers and two (2) flat washers two, (2) hinge pin screws loosely on both sides of the base box. 2. Raise the projector with the mounting bracket attached and slip though the hinge pin slots openings on the bracket into the ...
Page 11 - Troubleshooting Procedures; The angle adjustments are not tight they must be tightened.; Why won’t my bracket fit my projector?
SP-CEIL-012 Installation Manual Page - 11 - Troubleshooting Procedures QUESTION: My projector mount must be set at an angle to be viewed properly on the wall, but the projector will not hold at this position. Why is this? ANSWER: The angle adjustments are not tight; they must be tightened. QUESTION:...
Page 12 - Technical Specifications; Technical Dimensions
SP-CEIL-012 Page - 12 - Installation Manual Technical Specifications 4.50 4.50 6.75 6.00 Figure 5. Technical Dimensions
Page 13 - Warranty; Limited Lifetime Warranty; Contact InFocus Corporation
SP-CEIL-012 Installation Manual Page - 13 - Warranty Limited Lifetime Warranty All products carry a limited lifetime warranty from ship date against defects in materials and workmanship. InFocus Corporation is not liable for improper installation that results in damage to mounts, adapters, display e...
Page 14 - Notes
SP-CEIL-012 Page - 14 - Installation Manual IN-SPECEIL012.R2 Notes InFocus Corporation 27700B S.W. Parkway Ave. Wilsonville, OR 97070-9215 1-800-294-6400 www.infocus.com