Invacare Tracer SX5 - Manuals

Page 2 - REMOVING EXISTING WHEELCHAIR COMPONENTS; REMOVING THE REAR WHEELS; This kit contains the following items:

Tracer® SX5 Recliner Conversion Kit 2 Part No. 1110194 Rev A REMOVING EXISTING WHEELCHAIR COMPONENTS To convert the wheelchair to a recliner, the following components MUST be removed:Rear WheelsArmsBack CanesBack UpholsteryWheel LocksFork/Caster Assemblies - if wheelchair is 14 to 18-inches wide. RE...

Page 3 - REMOVING THE FLIP BACK ARMS

Part No. 1110194 Rev A 3 Tracer® SX5 Recliner Conversion Kit Back Cane Wheelchair Frame Locknut FIGURE 1 - REMOVING THE BACK CANES Hex Screw OUTSIDE OF WHEELCHAIR INSIDE OF WHEELCHAIR REMOVING THE WHEEL LOCKS (FIGURE 2) 1. Ensure the wheel lock is in the open (unlocked) position.2. Remove the bolt a...

Page 4 - INSTALLING THE RECLINING BACK; Remove the components listed in REMOVING EXISTING WHEELCHAIR; REMOVING THE FORK/CASTER ASSEMBLIES - WHEELCHAIRS; Locknut; WHEELCHAIRS UNDER 20-INCHES WIDE ONLY

Tracer® SX5 Recliner Conversion Kit 4 Part No. 1110194 Rev A INSTALLING THE RECLINING BACK 1. Remove the components listed in REMOVING EXISTING WHEELCHAIR COMPONENTS in this instruction sheet. 2. Perform the following to complete installation of the reclining back: Install the Rear Arm SocketsInstal...

Page 5 - INSTALLING THE OFFSET WHEEL BRACKETS (FIGURE 5); = RIGHT offset wheel bracket; INSTALLING THE REAR ARM SOCKETS (FIGURE 4); should be facing the REAR wheelchair when mounted.

Part No. 1110194 Rev A 5 Tracer® SX5 Recliner Conversion Kit OUTSIDE OF WHEELCHAIR FRAME DETAIL A - ARM SOCKET FIGURE 4 - INSTALLING THE REAR ARM SOCKET Hole Locknut Arm Socket Armrest Mounting Bracket Wheelchair Frame REAR OF WHEELCHAIR INSTALLING THE OFFSET WHEEL BRACKETS (FIGURE 5) NOTE: Stand ...

Page 6 - INSTALLING THE RECLINING BACK ASSEMBLY (FIGURE 6); the wheelchair frame.

Tracer® SX5 Recliner Conversion Kit 6 Part No. 1110194 Rev A INSTALLING THE RECLINING BACK ASSEMBLY (FIGURE 6) NOTE: This procedure requires two (2) people. One (1) person is needed to support the reclining back assembly during the procedure.NOTE: Stand behind the wheelchair to determine right and l...

Page 7 - INSTALLING THE REAR WHEELS; WARNING; ASSEMBLIES in the Owners Manual, part number 1110550.; All Wheelchair Widths.; NOTE: Arm socket and back upholstery

Part No. 1110194 Rev A 7 Tracer® SX5 Recliner Conversion Kit INSTALLING THE REAR WHEELS Refer to REMOVING/INSTALLING THE REAR WHEELS in the Owners Manual, part number 1110550. INSTALLING/ADJUSTING THE FORK/CASTER ASSEMBLIES WARNING SX5 Recliners MUST have 8-inch casters installed. If the wheelchair...

Page 8 - procedure of the instruction sheet.; FIGURE 7 - INSTALLING THE BOLT-ON WHEEL LOCKS; Bolt and Locknut; INSTALLING/ADJUSTING THE WHEEL LOCKS; Invacare for ordering information.

Tracer® SX5 Recliner Conversion Kit 8 Part No. 1110194 Rev A Installing the Wheel Lock Shoe Extension (FIGURE 8). 1. If necessary, disengage the wheel lock.2. Loosen the two (2) set screws in the wheel lock shoe extension.3. Insert the wheel lock shoe into the slot in the wheel lock shoe extension. ...

Page 9 - HOLDS; the occupied wheelchair in place when pushed.; FIGURE 8 - INSTALLING WHEEL LOCK SHOE EXTENSION; if pneumatic tire) into the tire when engaged.

Part No. 1110194 Rev A 9 Tracer® SX5 Recliner Conversion Kit ADJUSTING THE WHEEL LOCKS (FIGURE 10) NOTE: If wheels are pneumatic, before adjusting or replacing the wheel lock assemblies, ensure that the tires are inflated to the recommended psi on the side wall of tire. The recommended tire pressure...

Page 10 - CONVERTING ARMS FROM FLIP-BACK STYLE TO; from the spring button holes.; FIGURE 10 - ADJUSTING THE WHEEL LOCKS; into the tire when engaged.; still cannot be achieved, contact a qualified technician.

Tracer® SX5 Recliner Conversion Kit 10 Part No. 1110194 Rev A CONVERTING ARMS FROM FLIP-BACK STYLE TO REMOVABLE STYLE (FIGURE 11) 1. Remove the insert from the bottom of the rear arm tube.2. Align the spring buttons with the spring button holes in the rear arm tube.3. Install spring button assembly ...

Page 11 - INSTALLING THE SPREADER BAR; RECLINER section of the Owners Manual, part number 1110550.; INSTALLING THE ANTI-TIPPERS; arm socket from moving. See DETAIL E in FIGURE 11.

Part No. 1110194 Rev A 11 Tracer® SX5 Recliner Conversion Kit Rear Arm Tube Release Lever OUTSIDE OF THE WHEELCHAIR Spring Button Assembly Plug Button NOTE: Insert not shown for clarity. Spring Button Holes Spring Buttons REAR OF WHEELCHAIR FIGURE 11 - CONVERTING ARMS FROM FLIP-BACK STYLE TO REMOVAB...

Page 12 - USING THE RECLINER; INSTALLING THE HEADREST AND PILLOW (FIGURE 12); facing the front of the wheelchair.

Invacare Corporation www.invacare.com USA One Invacare Way Invacare is a registered trademark of Elyria, Ohio USA Invacare Corporation. 44036-2125 Yes, you can. is a trademark of 800-333-6900 Invacare Corporation. © 2002 Invacare Corporation Part No. 1110194Rev A - 11/02 USING THE RECLINER WARNING A...