Intellinet Network Solutions INT-524315-UM-0808-1 - Manuals

2-4-3 Remote Management 2-5 Setup Internet Connection (WAN Setup) 2-5-1 Setup procedure for 'Dynamic IP' 2-5-2 Setup procedure for 'Static IP' 2-5-3 Setup procedure for 'PPPoE' 2-5-4 Setup procedure for 'PPTP' 2-5-5 Setup procedure for 'L2TP' 2-5-6 Setup procedure for 'Telstra Big Pond' 2-5-7 Setup ...

3-2-1 Basic NAT Settings (Enable or disable NAT function) 3-2-2 Port Forwarding 3-2-3 Virtual Server 3-2-4 Port Mapping for Special Applications 3-2-5 UPnP Setting 3-2-6 ALG Settings 3-3 Firewall 3-3-1 Access Control 3-3-1-1 Add PC 3-3-2 URL Blocking 3-3-3 DoS Attack Prevention 3-3-3-1 DoS - Advance...

Chapter I: Product Information 1-1 Introduction and safety information Thank you for purchasing the Wireless 802.11n Gigabit Router. The INTELLINET NETWORK SOLUTIONS Wireless 802.11n Gigabit Router is the latest in wireless networking. Taking advantage of the Wireless-N (Draft 802.11n) technology, a...

1-3 System Requirements z Internet connection, provided by xDSL or cable modem with an RJ-45 Ethernet port. z Computer or network devices with wired or wireless network interface card. z Web browser (Firefox 1.5 or above, Microsoft Internet Explorer 4.0 or above, Netscape Navigator 4.7 or above, Ope...

1-5 Wireless Gigabit R outer hardware description Front Panel LED Name Light Status Description PWR ON Router is switched on and correctly powered On Wireless network is switched on or WPS mode is on. Off Wireless network is switched off WLAN Flashing Wireless LAN activity (transferring or receiving...

Back Panel Item Name Description Antennas A to C 3dBi dipole antennas. Power Power connector, connects to A/C power adapter. Reset / WPS Reset the router to factory default settings (clear all settings) or start WPS function. Press this button and hold for 10 seconds to restore all settings to facto...

Chapter II: System and Network Setup 2-1 Connecting the Wireless Gigabit Router This chapter explains how to connect the router to your computers and how to access the Internet. 1. Connect your DSL or cable modem to the WAN port of router using the provided RJ45 Ethernet cable. Standard modems provi...

3. Connect the A/C power adapter to the wall socket, and then connect it to the 'Power' socket of the router. 4. Check all LEDs on the front panel. The 'PWR' LED should be steadily on, WAN and LAN LEDs should be on if the computer or network device connected to the respective port of the router is p...

Input 'ipconfig', then press the 'Enter' key. Check the IP address followed by 'Default Gateway', in this example, the IP address of the router is 192.168.2.1, please note that this value may be different. 3. Connect the router's management interface by the Web browser After your computer has obtain...

2-3 Using Quick Setup This router provides a Quick Setup procedure, which will help you to complete all required settings you need to access the Internet quickly. Follow the instructions below to complete the 'Quick Setup': Please go to the QuickSetup menu by clicking 'QuickSetup' button. HERE!

2. Broadband Type Choose the broadband (Internet connection) type you use; there are six types of Internet connections: Cable Modem - Please go to section 2-3-1 Fixed-IP xDSL - Please go to section 2-3-2 PPPoE xDSL - Please go to section 2-3-3 PPTP xDSL - Please go to section 2-3-4 L2TP xDSL - Pleas...

PPTP settings section: Items and meanings: User ID (1): Enter the user ID (user name) assigned by your ISP. Password (2): Input the password provided by your ISP. PPTP Input the IP address of PPTP gateway Gateway (3): assigned by your Internet service provider here. Connection Enter the connection I...

Click the 'Apply' button to prepare to restart the router, and you'll see this message: Wait for about 30 seconds, then click 'OK!'. You'll be forwarded to the router management Web interface. The router is now running with the new settings. If all information entered is correct, you can access the ...

Click 'Continue' to go back to the previous setup menu and to continue with the router setup. Click 'Apply' to reboot the router so the settings will take effect. Please wait for about 30 seconds while the router is rebooting. 2 -5-3 Setup procedure for 'PPPoE': Items and meanings: User Name (1): En...

2-5-7 Setup procedure for 'DNS': If you select ' Dynamic IP ' or ' PPPoE ' as the Internet connection method, the ISP typically assigns the DNS Server information to the router. However, if you have a preferred DNS server, use a static IP address or your service provider didn't assign the IP address...

2-6 LAN Configuration This section deals with the IP Address settings of the local network. Normally there is no need to make any changes here. The default values work fine for most applications; you can skip this chapter and go directly to 2-7 WLAN configuration. There are two ways to assign IP add...

Follow the following instructions to set wired LAN parameters: Click the 'LAN' menu on the left of the Web management interface. There are three setup groups here: 'LAN IP', 'DHCP Server', and 'Static DHCP Leases Table'. Here are setup instructions for each of them: 2-6-1 LAN IP section: Items and m...

2-7 Wireless LAN Configuration If your computer, PDA, game console, or other network devices equipped with a wireless network interface, you can use the wireless function of this router to connect to the Internet and share resources with other computers on your network. We strongly recommend you use...

WMM (12): Short for Wi-Fi MultiMedia, it will enhance the data transfer performance of multimedia contents when it's being transferred over wireless network. If you don't know what it is or not sure if you need it, it's safe to set this option to 'Enable'. The default setting is 'Disable'. Click 'Ap...

2-7-3 Wireless Security Unlike the previous chapter, which dealt with advanced settings you normally don't need to change, this chapter is of great importance. It explains how you can protect your wireless network from unauthorized access. It's very important to program the wireless security setting...

Click 'Continue' to go back to the previous setup menu and to continue with the router setup. Click 'Apply' to reboot the router so the settings will take effect. Please wait for about 30 seconds while the router is rebooting. 2-7-3-4 WPA RADIUS: If you have a RADIUS server, this router can work wit...

input up to 16 alphanumerical characters here. This is optional and you can leave it blank; however, it's recommended to use this field so you can identify the MAC addresses later. Add (8): Click the 'Add' button to add the MAC address and associated comment to the MAC address filtering table. Clear...

Chapter III Advanced Functions 3-1 Quality of Service (QoS) Quality of service provides an efficient way for computers on the network to share the Internet bandwidth with a promised quality of Internet service. Without QoS, all computers and devices on the network compete with each other to get Inte...

Move Down (10): You can lower the priority of the selected QoS rule by clicking this button. Reset (11): If you want to erase all values you just entered, click 'Reset'. Click 'Apply' (12) to save the settings. Click 'Continue' to go back to the previous setup menu and to continue with the router se...

Click 'Continue' to go back to the previous setup menu and to continue with the router setup. Click 'Apply' to reboot the router so the settings will take effect. Please wait for about 30 seconds while the router is rebooting. 3-2-4 Port Mapping for Special Applications Some applications require mor...

data packets, to make your Internet connection become very slow, even unusable. Check this box and the router will ignore all inbound PING requests. But when you activate this function, you will not be able to ping your own router from the Internet, either. Port Scan (3): Some malicious intruder wil...

then click 'Delete Selected'. (You can select more than one DMZ entry at the same time). Delete All (8): Deletes all DMZ entries. Reset (9): Reset the input form values. Click 'Apply' (10) to save the settings. Click 'Continue' to go back to the previous setup menu and to continue with the router se...

The information shown may vary from the output on your screen. 3-4-4 System Log Click the 'System Log' link on the left of the Web management interface to view the system log information. All important system events are logged here. Items and meanings: Save (1): Saves current event log to a text fil...

3-4-6 Statistics Statistics of the wireless LAN, wired LAN, and WAN interface of the router are shown when you click on the 'Statistics' link on the left of the Web management interface. You can click the 'Refresh' button to display the latest information. The information is accumulative and is only...

Restore Press 'Browse…' to pick a previously saved Settings (2): configuration file from your computer, and then click 'Upload' to transfer the configuration file to the router. After the configuration is uploaded, the router's current configuration will be replaced by the file you just uploaded. Re...

Chapter IV: Appendix 4-1 Hardware Specifications Standards • IEEE 802.1d (Spanning Tree Protocol) • IEEE 802.11b (11 Mbps Wireless LAN) • IEEE 802.11g (54 Mbps Wireless LAN) • IEEE 802.11n Draft 2.0 (300 Mbps Wireless LAN) • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • I...

power adapter, disconnect the router and A/C power adapter from the utility power (make sure it's safe before you're doing this!), and call your dealer for help. The date and time of all event logs are wrong a. Adjust the internal clock of the router.

4-3 Glossary Default Gateway (Router): Every non-router IP device needs to configure a default gateway's IP address. When the device sends out an IP packet, if the destination is not on the same network, the device has to send the packet to its default gateway, which will then send it out toward the...

A network mask is also a 32-bit binary pattern, and consists of consecutive leading 1's followed by consecutive trailing 0's, such as 11111111.11111111.11111111.00000000. Therefore, sometimes a network mask can also be described simply as “x” number of leading 1's. When both are represented side by ...