Intellinet Network Solutions 524582 - Manuals

Page 3 - Some screen images have been modified to fit the format of; reGulatory statemeNts; FCC Caution

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS ™ Wireless G 4-Port VPN Router, Model 524582.This quick install guide presents the rudimentary steps required to set up and operate this device. For more detailed instructions and specifications, refer to the user manual 1) on the CD enclosed...

Page 4 - not

extremities of hands, wrists and feet) during wireless modes of operation. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including in...

Page 5 - iNitial setuP; displays, fill in the “User

5 iNitial setuP 1. Set up your network as shown in the diagram. NOTE: The four LAN connections are examples only. 2. Your LAN PC clients need to be set so that an IP address can be obtained automatically. By default, the router’s DHCP server is enabled so that this doesn’t require any extra steps he...

Page 6 - click “HOME,” then “Quick Setup” (one of the four sub-menu buttons; quick setuP; as quickly as possible. To configure the router as; Time Zone; affect functions such as log entries and firewall settings.

reasons, it’s recommended that you change the password as soon as possible (see General Setup / System / Password in the user manual).Once logged in, you can navigate through the Web-based management user interface by selecting the options at the top-right. To access the Quick Setup Wizard, click “H...

Page 7 - Broadband Type; your ISP requires. Click “Back” to return to the previous screen.

Set Time Zone — Select the time zone of the country or region you’re in. The router will set its time based on your selection. Time Server Address — In case the default time server isn’t working, you can manually assign a time server address in this field. Daylight Saving — For the router to account...

Page 8 - Broadband Type: Cable Modem; ISP. As an option, you can click “Clone MAC Address” to replace the; Fixed IP xDSL

8 Broadband Type: Cable Modem Select if your ISP will automatically give you an IP address. Some ISPs require that you provide additional information, such as host name and MAC address (as shown below). Host Name — If your ISP requires a host name, enter the host name it provides; otherwise, leave i...

Page 9 - PPPoE; User Name

Click “OK” to finish the Fixed IP xDSL configuration; then you can start using the router. PPPoE Select if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all information required in this section. User Name — Enter the username provided by your ISP for th...

Page 10 - PPTP; Obtain an IP address automatically

time period of Internet non-use exceeds the Idle Time setting. • “Manual”: Connects the router to the ISP only when you click “Connect” on the Web user interface. The WAN connection will not disconnect due to the idle timeout, and if the WAN connection is disrupted and re-linked, the router will not...

Page 14 - Telstra BigPond

IP Address — This is the IP address your ISP has given you to establish an L2TP connection. Subnet Mask — Enter the subnet mask provided by your ISP (for example, 255.255.255.0). Default Gateway — Enter the IP address of the ISP gateway. User ID — Enter the username provided by your ISP for the L2TP...