Intellinet Network Solutions 523615 - Manuals

15 11. Input “ping 192.168.10.1,” then “Enter.”12. If you can see “Reply from 192.168.10.1: bytes=32 time=2ms TTL=64,” then theconnection between your computer and the router is completed. 4. ROUTER SETUP 4.1 Start Internet Explorer to Log In 1. Start your Web browser.2. Enter “http://192.168.10.1” ...

16 Click the “Login” button to enter the configuration and configure the router manually.This may be required if the Internet Wizard fails to detect the settings automatically. The Internet Wizard lets you configure your Internet connection quickly andconveniently.You can login directly without acco...

19 “Connect” is a manual connection button. By clicking it, the system can beconnected to the Internet again.Click “Save” to save the current configuration.Restart all PCs connected to the router. NOTE: Save the router configuration after completion; otherwise, the configuration will be lost after t...

20 On Demand is only effective for Disconnect PPP session if idle time is longer than _ Min . Connect Manually: With this option, users have to connect with the Internet manually after disconnection. This option is only effective with Disconnect PPP session if idle time is longer than _ Min . Preven...

22 The “Connect” button is a manual WAN port IP address refresh function button. Ifclicked, the WAN port will re-obtain a dynamic IP address and connect with theInternet.Click the “Save” button to save the current configuration, then restart all PCsconnected with router. Other configuration options:...

24 If the WAN connection is successfully established, you can see the following:• Connection Type should be “Static IP”• Connection Status should be “Successfully connected”• Physical Address shows the router’s WAN port MAC address (physical address).• WAN IP Address, Subnet Mask, Default Gateway, P...

27 PPPoE (ADSL), Dynamic IP and Static IP setup procedures are illustrated in sections 4.2, 4.3 and 4.4, respectively. 4.6.2 LAN Setup Click ”Basic Setup” ➝ “ LAN/DHCP Setup.” This page lets you configure the LAN IP settings of the router, along with the DHCPserver settings. System IP Setup: This se...

29 Internet Access Restriction: You can define the maximum number of clients with access to the Internet at the same time. The default value “0” means that there is nolimitation. Enter the value “15” if you wish to make sure that at no time more than 15 PCs connect to the Internet. 4.6.3 Link Setup/...

31 Mode: Automatic mode and manual mode on/off. In Manual mode, you can define the connection speed. Auto is the default and recommended mode. Speed: When in Manual mode, you can define the port speed here: either 10 Mbps or 100 Mbps. Apply: Apply current settings. Link Information: This section dis...

32 NOTE: Save the router configuration after completion; otherwise, the configuration will be lost after the router is restarted. 4.6.5 Switch Configuration Click “Basic setup” ➝ ”Switch Config.” Port Mirror: Activate to mirror all Internet traffic to the sniffer port (LAN Port 1). Allow Unicast Pac...

33 Login Account Setup: Enter your old ID and password and the new values. Click “Apply” to save the changes. The default Login ID is “root”; the default password isblank (no password). Admin E-Mail Setup: If you want to receive router’s the system log via e-mail, configure e-mail address, SMTP serv...

34 4.7.2 Firmware Upgrade Click “System” ➝ “Firmware Upgrade.” Firmware updates may be available from time to time for the router. Beforecontacting technical support, make sure that you have the latest firmware versioninstalled on the router. Upgrade procedure: 1. Download an updated firmware versio...

36 The Router will restart automatically after the upgrade process is completed. Afterthe upgrade, verify the firmware version. NOTE: The upgrade process takes about 60 seconds. During this time, do not turn off the power; otherwise, router will be damaged. 4.7.3 System Log Click “System” ➝ “System ...

37 4.7.4 Access List Click “System” ➝ “Access List.” Access List With this function you can limit access to the router based on the IP address of thecomputer. IMPORTANT: When you click "Start" to activate the service, you will see: It is important to click "OK" here to make sure your...

41 4.8.3 Application QoS Click “QoS” ➝ “Application QoS.” Define the maximum bandwidth available, or the minimum guaranteed bandwidthfor pre-defined applications. Setup Method: Choose the application program; select the operation mode (Max. Limit or Min. Guarantee) and specify the bandwidth throughp...

43 4.9 NAT 4.9.1 Applications Click “NAT” ➝ ”Applications.” Some programs, such as Internet network games, filesharing programs and Internetphones, need more than one connection. Because of the NAT firewall, some of theprograms do not work correctly. The “Applications” function can make thoseprogram...

48 Internal Port Range: 17997–18003 Click “Add.” Repeat the same steps, but this time with UDP (as Silent Hunterrequires both TCP and UDP). After completion, you should have two new rules: NOTES: Save the router configuration after completion; otherwise, the configuration will be lost after the rout...

52 Dynamic DNS (DDNS) is a system that allows the domain name data held in a name server to beupdated in real time. The most common use for this is in allowing an Internet domain name to beassigned to a computer (or router) with a dynamic IP address. This makes it possible for other siteson the Inte...

53 Setup Method: 1. Enter the computer’s name and the LAN card’s MAC address. Then click “Add” toadd new rule. You can search for the MAC addresses of all connected computersusing the “Search MAC address” button.2. Clicking on the “Wake-up PC” button sends the Magic Packet to the computer,which caus...

54 Setup Method:Status: Current status of the URL filter: “Started” or “Stopped.” Operation: Click “Start” or “Stop” to activate or deactivate the URL filter. IP Address: Enter a single IP address or an IP address range for which this filter should be applied. Physical: Enter the MAC address of the ...

57 5. SPECIFICATIONS Standards • IEEE 802 .3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) General • LAN ports: - Model 523608: 4 RJ-45 10/100 Mbps data ports - Model 523615: 8 RJ-45 10/100 Mbps data ports • LAN ports with Auto MDI/MDI-X• LAN to WAN throughput: 94 Mbps• Flash: 2 MB• M...