Integra MZA-4.7 - Manuals

5 Features Thank you for purchasing an Integra MZA-4.7 Multi-Zone Amplifier.Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Multi-Zone ...

6 Features —Continued advantageous to have different volume control but the same source, or the same volume with separate standby control. Zone linking is setup either via the front panel user interface or by the IMC program. 32 Zones There are 32 zones of possible control.On a MZA-4.7 each zone mus...

7 Part Names and Functions A Front Panel Solid Aluminum front Panel. B Infra-Red Receiver Receiver for the MZA - 4.7 IR control – Not IR pass through! C LCD display Back lit LCD display for menu guided control and programming. The display is dimmed when all zones are OFF. D Multi Jog The display men...

8 Part Names and Functions —Continued A AC INLET IEC socket. B Speaker Terminals Plug in terminal clamp connectors accept 1.5mm 2 speaker wires. C ZONE PREOUT Audio and composite video outputs. D RS232 Comm Port The port is used for setup, control or monitoring. The interconnecting cable must be str...

9 Typical System Configuration Gym Lounge Zone 1 Zone 2 Zone 3 Zone 4 Study Bedroom & Ensuite TV or screen TV or screen TV or screen Keypad ACTIVE SUB Tuner To IR2 CD changer DVD Changer To IR1 + IR2 To IR1 SAT receiver DVD Player VCR To IR1 + IR2 Fig 1 Keypad AMP

10 Typical System Configuration —Continued Fig 1 depicts a typical configuration, where the MZA-4.7 is providing audio into four listening zones. Each zone consists of a room with a pair of speakers, and a suitable controller. Additionally a zone may require TV’s or screens. In Fig 1 three such scre...

11 Controller Termination The recommended wiring and color scheme is shown in Fig 2.Use the Standard 568-B color code for the CAT5E termination to the Controller – see Table 1. Although it is possible to daisy chain controllers we recommend “home runs” of CAT5E cable with a maximum cable length of 2...

12 Advanced IR Control IR routing – discussed in “Typical System Configuration” on page 9 – is used to address specific centrally located source components.When several same brand and model source components are required in an installation, steps must be taken to isolate the radiated IR from interfe...

14 Zone Linking Zone linking is a useful feature for simplifying control in closely coupled rooms, where the rooms require different volume levels and On/Off status, yet the same audio source.If for instance the Lounge and Study zones in the “Typical System Configuration” on page 9 were always used ...

15 Automation Any MZA-4.7 parameter is controllable using the serial RS232 interface. The RS232 protocol is outlined in the follow-ing section, and encompasses both the amplifier and connected keypads. The interface is bidirectional, allowing the amplifier and network to be monitored.The interconnec...

16 RS232 Protocol The RS232 serial port provides data acquisition and control of Integra networks by a home automation system, or PC. The interconnecting cable must be straight: 9 pin ‘D’ connectors.Baud Rate = 9600, Characters are all ASCII.Command Structure: <command><zone><data>...

17 RS232 Protocol —Continued Notes: ■ Commands are used as notifications. If an amplifier is switched ON, it will notify the other devices on the control bus by sending the Standby command (01). Any amplifiers with the same zone will take the notification as a command and also switch ON. ■ When a co...

19 RS232 Protocol —Continued Keypad Key Codes An Integra Keypad may be directed to emit its learnt IR commands via RS232 control. This is achieved by sending a ‘Cause key press on Keypad’ command “0B” followed by the zone, and the Keypad key code (data).The Keypad key code is encoded with IR string ...

20 Menu Navigation Front Panel user interface: The MZA-4.7 has a LCD display and multi-jog (Rotary Encoder with Push Select) for menu navigation.The menus are hierarchal providing access and control of all amplifier functions.The user navigates through the menu using left/right multi jog rotations a...

21 Menu Navigation —Continued • Preamp Volume: Only displayed if the room is a preamplifier. • Mode: Track Two options track or Independent • Track Offset: 0 –37 to +25 range of adjustment. • Return Steps back to More function menu. • Return: Steps back to the Primary func-tions menu. ■ System Setup...

22 Programming Using IMC (Integra Music Center) IMC is an amplifier setup program.Full control and tracking of any MZA-4.7 zone is provided.The program runs on PC’s running Win 2000 - Win XP operating systems, and communicates via either RS232 or USB.When a MZA-4.7 is first attached to a PC running ...

23 Programming Using IMC (Integra Music Center) —Continued ■ Zone Select To select the zone move the cursor over the zone tab’s down arrow and left click. A zone list window appears – make the selection with a left mouse click.Placing the cursor over the zone tab’s room description displays informat...

25 Programming Using IMC (Integra Music Center) —Continued The window provides the means to control the occasionally used functions like bass, treble, amplifier and preamplifier balance and loudness. These are all adjusted using a left mouse click while above the button or slider. Note: The preampli...

26 Programming Using IMC (Integra Music Center) —Continued ■ Preset Programming Preset programming effects all zones on the MZA-4.7. There are six momentary preset buttons – Preset 1 - Preset 6. These presets are stored in the MZA-4.7, and may be setup using the IMC setup window.Left mouse click ove...

27 Programming Using IMC (Integra Music Center) —Continued ■ Source Control Alarm Clock Programming If a KEY-5.7 keypad is connected to the MZA-4.7, then source control can also be included in an alarm preset.In IMC’s main window; file open a KEY-5.7 keypad Window.Select the connected Keypad’s zone ...

28 SN 29344365A (C) Copyright 2006 ONKYO CORPORATION Japan. All rights reserved. D0612-2 Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A.Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION Sales &...