Integra DTA-9.4 - Manuals - manualsarea.com

Page 2 - Important Safeguards; WARNING; AVIS

2 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructio...

Page 3 - Precautions

3 1. Recording Copyright Recording of copyrighted material for other than personal use isillegal without permission of the copyright holder. 2. AC Fuse The fuse is located inside the chassis and is not user-serviceable. Ifpower does not come on, contact your Integra/Onkyo authorizedservice station. ...

Page 4 - Features; 2V trigger input terminal; Contents

4 Features ■ High output switching power supply dedicated toaudio processing ■ Ultra low impedance design with extensive use ofcopper bus bar, large coil, and ultra heavy gaugewire ■ 7-channel integral PWM amplifier with completelydiscrete structure ■ Balanced XLR Inputs for Better Dynamic Rangeand ...

Page 5 - Supplied accessories

5 Supplied accessories Check that the following accessories are supplied with the DTA-9.4. Power cord × 1 Stereo mini-plug cable × 1 (for connecting to the 12VTRIGGER IN terminal on theCONTROL LINK-compatibleIntegra/Onkyo products)

Page 7 - Quick operation guide

7 Quick operation guide Here is a quick guide for those who want to listen to music or viewtheir favorite movies as soon as possible. Connections andoperations are explained briefly here for the purpose of just gettingyou started. For those of you who want to operate the DTA-9.4 right away,follow th...

Page 8 - Front panel facilities

8 Front panel facilities Power On / Off Turns on and off the main power supply for the DTA-9.4. Power Off: The DTA-9.4 turns off. Power On: When no device is connected to the 12V TRIGGER IN terminal, the DTA-9.4 turns on.When a device is connected to the 12V TRIGGER IN terminal,the DTA-9.4 turns on ...

Page 9 - Rear panel facilities and connections

9 Rear panel facilities and connections 2. Disconnecting the input terminal Pull out the connection cable while holding down the lever. Note: • When using this balanced connection for a specific channel between the control amplifier and DTA-9.4, set the INPUTSELECT switch to the side (the balanced i...

Page 12 - Connecting to the Integra AV Controller DTC-9.4

12 R L R L PRE OUT FRONT SUB SURR SURR BACK / ZONE 2 CENTER INPUT SELECT OUTPUT INPUT SELECT OUTPUT INPUT SELECT OUTPUT INPUT SELECT OUTPUT INPUT SELECT OUTPUT INPUT SELECT OUTPUT INPUT SELECT OUTPUT AC INLET 12 V TRIGGER IN CONTROL LINK IN MODEL NO. DTA- 9.4 SEVEN CHANNEL AMPLIFIER SURROUND RIGHT R...

Page 13 - Troubleshooting guide

13 Troubleshooting guide If the DTA-9.4 fails to function normally, first check the followingpoints before contacting your Integra/Onkyo dealer. If the problemis not solved after going through the following list, unplug thepower cord and contact your Integra/Onkyo authorized servicecenter. No power....

Page 14 - Specifications

14 Specifications Amplifier section Continuous average power output (FTC Power, Rated Power) (Measured with AES-17 LPF) Front L/R: 120 Watts per channel min. RMS. Into8 ohms 2 channel driven, from 20 to20,000 Hz with no more than 1 % totalharmonic distortion. 240 Watts per channel min. RMS. Into4 oh...

Page 15 - Memo