Integra 310-402XX - Manuals

Valving The Head Assembly 1. Clamp the head assembly in the vice (B1) . 2. Set up a clean, low lint paper towel on the bench next to the vice. 3. Using a marker, label the upper right hand corner of the paper towel with an “R” (rebound) and the lower right hand corner of the paper towel with a “C” (...

Assembly C • Be sure all seals are lubricated with O-ring lube prior to assembling the unit. • Once the head assembly has been completely built, the damper can be assembled as follows: 1. Clamp the body of the shock in the vice. NOTE: When setting the fl oating piston to the proper height, be sure n...

PRELOAD VALVE STACK COMPRESSION VALVE STACK REBOUND VALVE STACK 1 2 3 4 5 6 7 8 9 10 11 12 13 12 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 36 35 15 14 Item No. Description Part No. 1 Retaining Ring - Spherical Bearing . . . . . . . . 310-30328 2 Spherical Bearing - .500" I.D. . . ...