Insignia NS-MG1205-C - Manuals

Insignia NS-MG1205-C – Manual in PDF format online.

Manuals:

Manual

Manual Insignia NS-MG1205-C

Summary

Page 2 - 8” METAL AND GLASS TV STAND; SAFETY INFORMATION AND SPECIFICATIONS; Maximum weight

2 68” METAL AND GLASS TV STAND www.insigniaproducts.com SAFETY INFORMATION AND SPECIFICATIONS CAUTION: The top surface of this stand is designed for use with a product weighing no more than 300 lbs. (136.4 kg) and having a 68" wide flat-panel TV dimensions permits it to sit evenly on the stand w...

Page 3 - PACKAGE CONTENTS: PARTS

3 68” METAL AND GLASS TV STAND www.insigniaproducts.com PACKAGE CONTENTS: PARTS A Front Support (1) B Front base (1) C Back base (1) D Left base (1) E Right base (1) F Rear support panel (1) G Top shelf (1) I Middle shelf (1) R Top frame (1) J Bottom shelf (1) H Pillar support (2) Note: The front ba...

Page 4 - PACKAGE CONTENTS: HARDWARE

4 68” METAL AND GLASS TV STAND www.insigniaproducts.com PACKAGE CONTENTS: HARDWARE Note : You may receive extra hardware. Make sure that you have all of the hardware necessary to assemble your new TV stand: Label Hardware Qty. K 6 L 2 M 16 N 6 Foot Medium screw 1 1/4" (33 mm) Short screw 3/4"...

Page 5 - ASSEMBLY INSTRUCTIONS; Step 1: Preparing the bases

5 68” METAL AND GLASS TV STAND www.insigniaproducts.com ASSEMBLY INSTRUCTIONS Step 1: Preparing the bases • Insert two suctions cups into the front base ( B ) and two suctions cups in the back base ( C ). You’ll need: O (4) NS-MG1205-C_14-0264_MAN_V1_ENG.fm Page 5 Wednesday, April 30, 2014 3:29 PM

Page 6 - Step 2: Attaching the front base to the front support

6 68” METAL AND GLASS TV STAND www.insigniaproducts.com Step 2: Attaching the front base to the front support • From the inside of the front base ( B ), insert a short screw ( M ) through the screw hole on each tab and into the screw holes on the front support ( A ). Make sure that the tabs with the...

Page 7 - Step 3: Attaching the side bases to the back base

7 68” METAL AND GLASS TV STAND www.insigniaproducts.com Step 3: Attaching the side bases to the back base 1 From the inside of the back base ( C ), insert short screws ( M ) through the screw holes on the tabs and into the screw holes on the left base ( D ). On the back base ( C ), make sure that th...

Page 8 - Step 4: Attaching the left and right bases to the front support

8 68” METAL AND GLASS TV STAND www.insigniaproducts.com Step 4: Attaching the left and right bases to the front support • Slide the ends of the left base ( C ) and right base ( E ) into the openings on the front support ( A ). Make sure that the two screw holes on the bottom of each base and the scr...

Page 9 - Step 5: Attaching the top frame

9 68” METAL AND GLASS TV STAND www.insigniaproducts.com Step 5: Attaching the top frame • Align the screw holes in the tabs on the ends of the top frame ( R ) with the screw holes on the inside top of the front support ( A ). Insert short screws ( M ) through the screw holes on the tabs and into the...

Page 10 - Step 6: Attaching the rear support panel

10 68” METAL AND GLASS TV STAND www.insigniaproducts.com Step 6: Attaching the rear support panel • Insert long screws ( N ) through the screw holes on the rear support panel ( F ) and into the screw holes on the top frame ( R ) and back base ( C ). Use the Allen wrench ( Q ) to tighten the screws. ...

Page 11 - Step 7: Attaching the feet

11 68” METAL AND GLASS TV STAND www.insigniaproducts.com Step 7: Attaching the feet • Flip the stand so the rear support panel ( F ) is facing up. Screw a foot ( K ) into the each of the bottom four corners of the front support frame ( A ) and the bottom corners of the rear support panel ( F ). You’...

Page 12 - Step 8: Attaching the top shelf and piller supports

12 68” METAL AND GLASS TV STAND www.insigniaproducts.com Step 8: Attaching the top shelf and piller supports 1 Attach a shelf pad ( S ) to each of the top corners on the rear support panel ( F ). 2 Align the screw holes on the top shelf ( G ) with the screw holes in the top of the front support ( A ...

Page 13 - Step 9: Installing the middle shelf

13 68” METAL AND GLASS TV STAND www.insigniaproducts.com Step 9: Installing the middle shelf 1 From the front of the stand, slide the middle shelf ( I ) into the shelf bracket on the rear support panel ( F ). Make sure that the screw holes in the middle shelf face the front of the stand and the blac...

Page 14 - Step 10: Install the bottom shelf

14 68” METAL AND GLASS TV STAND www.insigniaproducts.com Step 10: Install the bottom shelf • From the front of the stand, insert the bottom shelf ( J ). Make sure that the notch of the bottom shelf ( J ) faces the back of the stand and fits around the rear support panel ( F ). NS-MG1205-C_14-0264_MA...

Page 15 - Step 11 - Optional: Install the anti-tipping restraint hardware

15 68” METAL AND GLASS TV STAND www.insigniaproducts.com Step 11 - Optional: Install the anti-tipping restraint hardware • Instructions are included in the bag containing the hardware. You’ll need: Phillips screwdriver Drill NS-MG1205-C_14-0264_MAN_V1_ENG.fm Page 15 Wednesday, April 30, 2014 3:29 PM

Page 16 - CARE AND MAINTENANCE; Glass; WARNING

16 68” METAL AND GLASS TV STAND www.insigniaproducts.com CARE AND MAINTENANCE Glass • Use a commercial liquid glass cleaner and a soft cloth. • Do not use harsh powders or any other abrasive substances as they will scratch the glass. WARNING Please use your furniture correctly and safely. Improper u...

Page 17 - How long does the coverage last?

17 68” METAL AND GLASS TV STAND www.insigniaproducts.com ONE-YEAR LIMITED WARRANTY - INSIGNIA Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original...