Page 2 - OPERATING AND SAFETY PRECAUTIONS
Page 2 of 8 PH30F-XXX-XXX-C (en) WARNING EXCESSIVE AIR PRESSURE. Can cause per- sonal injury, pump damage or property damage.Do not exceed the maximum inlet air pressure as stated on the pump model plate.Be sure material hoses and other components are able to withstand fluid pressures developed by t...
Page 3 - EXCESSIVE AIR PRESSURE. Can cause pump
PH30F-XXX-XXX-C (en) Page 3 of 8 y Hytrel® and Viton® are registered trademarks of the DuPont Company y Loctite® and 242® are registered trademarks of Henkel Loctite Corporation y y Santoprene® is a registered trademark of Monsanto Company, licensed to Advanced Elastomer Systems, L.P. y ARO® is a re...
Page 4 - COMMON PARTS
Page 4 of 8 PH30F-XXX-XXX-C (en) PARTS LIST / PH30F-XXX-XXX-C FLUID SECTION c 637441-XX Fluid Section Service Kits include: Balls (see Ball Option, refer to -XXX in chart below), Diaphragms (see Diaphragm Op- tion, refer to -XXX in chart below), and items 3, 19, 70, 144, 175 and 196 (listed below) p...
Page 5 - ASSEMBLY TORQUE REQUIREMENTS; ALL FASTENERS ARE METRIC.; LUBRICATION / SEALANTS; confi guration only.
PH30F-XXX-XXX-C (en) Page 5 of 8 ) ASSEMBLY TORQUE REQUIREMENTS ( NOTE: DO NOT OVERTIGHTEN FASTENERS. ALL FASTENERS ARE METRIC. (14) Cap screw, 65 - 70 ft lbs (88.1 - 94.9 Nm).(26) Manifold screw, 60 - 70 ft lbs (81.4 - 94.9 Nm).(27) Fluid cap screw, 60 - 70 ft lbs (81.4 - 94.9 Nm).(131) Screw, 35 -...
Page 6 - AIR MOTOR SECTION SERVICE; Clean and lubricate parts not being replaced from service; MAJOR VALVE DISASSEMBLY; LIPS; AIR MOTOR PARTS LIST
Page 6 of 8 PH30F-XXX-XXX-C (en) PARTS LIST / PH30F-XXX-XXX-C AIR SECTION d Indicates parts included in 637369 air section service kit shown below and items 70, 144, 175 and 180 shown on page 4. MATERIAL CODE [B] = Nitrile [I] = Iron [Br] = Brass [P] = Polypropylene [C] = Carbon Steel [Sp] = Santopr...
Page 7 - Figure 3; MAJOR VALVE
PH30F-XXX-XXX-C (en) Page 7 of 8 PARTS LIST / PH30F-XXX-XXX-C AIR SECTION ) ASSEMBLY TORQUE REQUIREMENTS ( NOTE: DO NOT OVERTIGHTEN FASTENERS. ALL FASTENERS ARE METRIC. (105) Screw, 15 - 20 in. lbs (1.7 - 2.3 Nm).(134) Screw, 40 - 50 in. lbs (4.5 - 5.6 Nm). LUBRICATION / SEALANTS f Apply Lubriplate ...
Page 8 - TROUBLE SHOOTING; Product discharged from exhaust outlet.; DIMENSIONAL DATA; Figure 4; Exhaust Port
Page 8 of 8 PH30F-XXX-XXX-C (en) PN 97999-1381 TROUBLE SHOOTING Product discharged from exhaust outlet. Check for diaphragm rupture.Check tightness of (14) cap screw. Air bubbles in product discharge. Check connections of suction plumbing.Check “O” rings between intake manifold and fl uid caps.Check...