Page 2 - OPERATING AND SAFETY PRECAUTIONS
Page 2 of 8 PD07P-X-X (en) WARNING EXCESSIVE AIR PRESSURE. Can cause per- sonal injury, pump damage or property damage.Do not exceed the maximum inlet air pressure as stated on the pump model plate.Be sure material hoses and other components are able to withstand fl uid pressures developed by this p...
Page 3 - OPERATING INSTRUCTIONS; EXCESSIVE AIR PRESSURE. Can cause pump
PD07P-X-X (en) Page 3 of 8 y Hytrel® is registered trademarks of the DuPont Company y Santoprene® is a registered trademark of Monsanto Company, licensed to Advanced Elastomer Systems, L.P. y y Lubriplate® is a registered trademark of Lubriplate Division (Fiske Brothers Refi ning Company) y ARO® is ...
Page 4 - COMMON PARTS; TYPICAL CROSS SECTION; Figure 2
Page 4 of 8 PD07P-X-X (en) PARTS LIST / PD07P-X-X FLUID SECTION 637427-XX Fluid Section Service Kits include: Balls (see Ball Option, refer to -XX in chart below), Diaphragms (see Diaphragm Op- tion, refer to -XX in chart below), and item 19 (listed below) plus items 144, 174 and 94276 Lubriplate®...
Page 5 - PTFE; Torque Sequence; Figure 3
PD07P-X-X (en) Page 5 of 8 ) TORQUE REQUIREMENTS ( NOTE: DO NOT OVERTIGHTEN FASTENERS. (6) Diaphragm nut, 95 - 105 in. lbs (10.7 - 11.9 Nm).(26) Bolt, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then re- torque after initial run-in. (29) Nut, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternate...
Page 6 - Indicates parts included in 637428 air section repair kit.; GENERAL SERVICE NOTES:; AIR MOTOR PARTS LIST
Page 6 of 8 PD07P-X-X (en) PARTS LIST / PD07P-X-X AIR MOTOR SECTION 9 Indicates parts included in 637428 air section repair kit. MATERIAL CODE [B] = Nitrile [PPG] = Glass Filled Polypropylene [C] = Carbon Steel [SS] = Stainless Steel [CK] = Ceramic [SY ] = Syn-Seal [D] = Acetal [U] = Polyurethane DI...
Page 7 - MAJOR VALVE DISASSEMBLY
PD07P-X-X (en) Page 7 of 8 PARTS LIST / PD07P-X-X AIR MOTOR SECTION ) 134 138 139 135 107 171 121 166 201 (optional) 129 130 137 111 ) TORQUE REQUIREMENTS ( NOTE: DO NOT OVERTIGHTEN FASTENERS. (123) Torque to 4 - 6 in. lbs (0.45 - 0.68 Nm).(134) Torque to 15 - 20 in. lbs (1.7 - 2.3 Nm), wa...
Page 8 - TROUBLE SHOOTING; Product discharged from air exhaust.; DIMENSIONAL DATA; Figure 5; DIMENSIONS
Page 8 of 8 PD07P-X-X (en) PN 97999-1223 TROUBLE SHOOTING Product discharged from air exhaust. Check for diaphragm rupture.Check tightness of (6) diaphragm nut. Air bubbles in product discharge. Check connections of suction plumbing.Check “O” rings between intake manifold and fl uid caps.Check tight...