Page 2 - TABLE OF CONTENTS
2 MHD56037 - Edition 5 TABLE OF CONTENTS Description Page No. Safety Information Danger, Caution, Warning and Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Safe Operating Instruc...
Page 3 - SAFETY INFORMATION; Safety Summary; Ingersoll Rand
MHD56037 - Edition 5 3 SAFETY INFORMATION This manual provides important information for all personnel involved with the safe installation, operation and proper maintenance of this product. Even if you feel you are familiar with this or similar equipment, you should read this manual before operating...
Page 4 - SAFE OPERATING INSTRUCTIONS; WARNING LABEL
4 MHD56037 - Edition 5 SAFE OPERATING INSTRUCTIONS The following warnings and operating instructions have been adapted in part from American Society of Mechanical Engineers (Safety) Standard ASME B30.7 and are intended to avoid unsafe operating practices which might lead to injury or property damage...
Page 5 - SPECIFICATIONS
MHD56037 - Edition 5 5 SPECIFICATIONS Model Code Explanation Example: FA5-24MK320P FA5 - 24 M K 320 P Series (Capacity) FA5 = Air Powered Winch (5 metric ton / 11,000 lbs.) Drum Flange Height or Man Rider ® : - = Standard flange: 27 inch (660 mm) diameter T = Tall flange: 35 inch (890 mm) diameter M...
Page 7 - Description of Operation
MHD56037 - Edition 5 7 Description of Operation FA5 winches are air powered, planetary geared units designed for lifting and pulling applications. FA5 winches are available with either an internal automatic disc brake, a manual or automatic band brake, or a combination of both. The output from an ex...
Page 8 - Traceability; INSTALLATION; CAUTION; Mounting
8 MHD56037 - Edition 5 Traceability Load bearing parts are documented to provide traceability. The documentation includes chemical and physical properties of raw material, heat treating, hardening, tensile and charpy tests as required for the part. Units with M1, M2 or M3 in the model code have trac...
Page 9 - Wire Rope
MHD56037 - Edition 5 9 Table 2–Winch Bolt Hole Mounting Dimensions (Dwg. MHP2123) ‘A’ = 1.6 feet (0.5 metre) per inch of drum length: ‘A’ = 19.2 feet (5.85 metres) for 12 inch drum.‘A’ = 25.6 feet (7.80 metres) for 16 inch drum.‘A’ = 38.4 feet (11.7 metres) for 24 inch drum.‘A’ = 48.0 feet (14.6 met...
Page 10 - Air Supply
10 MHD56037 - Edition 5 Installing Wire Rope CAUTION • To avoid disc brake damage when installing wire rope pressurize brake with a minimum of 60 psi (4.1 bar) air from an auxiliary source. Refer to Dwg. MHP0166 on page 10.1. Cut wire rope to length in accordance with wire rope manufacturer’s instru...
Page 11 - Motor
MHD56037 - Edition 5 11 Air Lines Inside diameter of winch air supply lines must not be less than sizes shown in Table 4 on page 11. Before making final connections, all air supply lines should be purged with clean, moisture free air or nitrogen before connecting to winch inlet. Supply lines should ...
Page 12 - Air Schematic–Constant Tension Winches
12 MHD56037 - Edition 5 Emergency Stop and Overload System Components(old style) (Dwg. MHP1492) Air Schematic–Emergency Stop and Overload System(old style) (Dwg. MHP1491) Constant Tension (optional feature) Refer to Dwg. MHP1865 on page 12 and Dwg. MHP1176 on page 12. The air supply line is connecte...
Page 13 - Initial Operating Checks; OPERATION; Winch Controls; Winch Mounted Air Throttle (standard feature)
MHD56037 - Edition 5 13 Initial Operating Checks Winches are tested for proper operation prior to leaving factory. Before winch is placed into service the following initial operating checks should be performed. 1. When first running motor inject some light oil into inlet connection to provide initia...
Page 15 - Emergency Stop and Overload System
MHD56037 - Edition 5 15 Pendant Hose and Operating Levers (old style) (Dwg. MHP1311) * For distances greater than 50 feet (15 metres) contact Ingersoll Rand Technical Sales for control suitability. Remote Pilot Lever Throttle (optional feature) Refer to Dwg. MHP0167 on page 56, item 358.Provides for...
Page 16 - Overload Device; Checking Overload Valve Setting; Local Control Emergency Stop Valve Operation
16 MHD56037 - Edition 5 Overload Device An overload device is available on winches with the emergency shutoff option. Overload device operation is based on differential pressure between air motor inlet and exhaust. The overload device is factory preset to actuate at 150% (± 25%) of winch rated capac...
Page 17 - Remote Pendant Emergency Stop Valve Operation; WARNING; Winch Brakes; Manual Drum Brake
MHD56037 - Edition 5 17 Remote Pendant Emergency Stop Valve Operation (Dwg. MHP1892) Winch Overload Device (optional feature) The overload device is integrated into winch air motor control air system and prevents winch from lifting a load greater than overload value. Refer to “INSPECTION” section on...
Page 19 - LUBRICATION; Recommended Lubricants; NOTICE; Component Lubrication
MHD56037 - Edition 5 19 LUBRICATION To ensure continued satisfactory operation of winch, all points requiring lubrication must be serviced with correct lubricant at proper time interval as indicated for each assembly. The lubrication intervals recommended in this manual are based on intermittent ope...
Page 21 - INSPECTION; Records and Reports; periodic; Frequent Inspection
MHD56037 - Edition 5 21 Drum Locking Pin (optional feature) Refer to Dwg. MHP0155 on page 61.Lubricate at least once every month, depending on environment and duty cycle, through grease fitting (139) located in gland (138) with 2 or 3 pumps of a grease gun. If drum locking pin is disassembled, clean...
Page 22 - NORMAL
22 MHD56037 - Edition 5 10. MOTOR. During operation check motor housing for excess heat build up. Housing should not be hot to touch. Listen for grinding or knocking noises. Ensure lubricated air supply provides 6 to 9 drops per minute of ISO VG 32 (SAE 10W) oil when winch is operated at rated capac...
Page 23 - INSPECTION AND MAINTENANCE REPORT; Ingersoll-Rand Force 5 Series FA5 and FA5T Air Winches
MHD56037 - Edition 5 23 INSPECTION AND MAINTENANCE REPORT Ingersoll-Rand Force 5 Series FA5 and FA5T Air Winches Model Number: Date: Serial Number: Inspected by: Reason for Inspection: (Check Applicable Box) 1. Scheduled Periodic Inspection(_____ Quarterly _____ Semiannually _____ Yearly) Operating ...
Page 24 - TROUBLESHOOTING; SYMPTOM
24 MHD56037 - Edition 5 TROUBLESHOOTING This section provides basic troubleshooting information. Determination of specific causes to problems are best identified by thorough inspections performed by personnel instructed in safety, operation and maintenance of this equipment. The chart below provides...
Page 26 - MAINTENANCE; Maintenance Intervals; Overload Valve Adjustment (optional feature)
26 MHD56037 - Edition 5 MAINTENANCE WARNING • Never perform maintenance on winch while it is supporting a load.• Before performing maintenance, tag controls: WARNING - DO NOT OPERATE -EQUIPMENT BEING REPAIRED. • Only allow service personnel trained in safety and service on this winch to perform main...
Page 28 - Constant Tension Adjustment (optional feature); Regulator Adjustment Procedure:; Setting with test load:; Disassembly; General Disassembly Instructions
28 MHD56037 - Edition 5 5. Hold cam adjustment screw in position (venting air) and tighten red setscrew. 6. If required, adjust payout limit switch. Test winch set points by operating winch through three complete cycles to ensure consistent limit switch operation within +/- 2 feet (2/3 metre) of set...
Page 30 - K5B Motor Disassembly; Crankshaft Disassembly; K5C2 Control Valve Disassembly; Handle Removal; Reverse Valve Removal
30 MHD56037 - Edition 5 NOTICE • Do not disassemble planetary gear assemblies (54), (58) and (67). K5B Motor Disassembly Refer to Dwg. MHP2093 on page 44.1. Remove five capscrews (1) from exhaust flange (253) or (254). Do not remove the two capscrews (255) from throttle valve assembly (260). 2. Remo...
Page 31 - Overload Valve Removal; Cleaning, Inspection and Repair
MHD56037 - Edition 5 31 Piston Removal 1. Remove capscrews (901) and washers (902) from piston cover (919). Remove cover and discard gasket (918). 2. Remove capscrews (901) and washers (902) from poppet cover (903). Remove cover and discard gasket (904). 3. Remove the following items from housing po...
Page 32 - Assembly; K5C2 Control Valve Assembly
32 MHD56037 - Edition 5 5. Inspect drum band brake lining for oil, grease and glazing. If drum band brake lining is oil-soaked replace brake bands as a set. Remove glazed areas of band brake lining by sanding lightly with a fine grit emery cloth. 6. Measure thickness of drum band brake lining. If dr...
Page 33 - K5C2-EX Control Valve Assembly
MHD56037 - Edition 5 33 2. Place handle assembly over reverse valve end. Slide handle will have to be lifted slightly to allow pin to fit into slot in seal bracket. 3. Secure handle assembly (930) to reverse valve with tab lock washer (909) and capscrew (901), torque to 15 ft lbs. (21 Nm). Washer (9...
Page 34 - Reduction Gear Assembly
34 MHD56037 - Edition 5 3. Install two seal rings (251) on each end of rotary valve (250). Place bearing (252) onto the rear of rotary valve (250) and press into position. Press only on bearing inner race. With rotary valve housing (247) exhaust flange down, install rotary valve into housing. 4. Ins...
Page 35 - Winch Assembly; Brake Seal Installation
MHD56037 - Edition 5 35 18. Align capscrew and dowel holes and install cover (73). Use a soft hammer or mallet to carefully tap the cover until flush with ring gear (72). Apply a light coating of Loctite ® 242 to capscrew (75) threads and install by hand. Equally tighten the capscrews in a diametric...
Page 37 - Testing; Operational Test; Limit Switches
MHD56037 - Edition 5 37 Testing Operational Test Prior to initial use, all new or repaired winches shall be tested to ensure proper operation.1. Check oil level in motor, reduction gear assembly and disc brake are correct. Top off levels as required before operation as described in the “LUBRICATION”...
Page 38 - FA5 WINCH ASSEMBLY DRAWINGS REFERENCE DIAGRAM
38 MHD56037 - Edition 5 FA5 WINCH ASSEMBLY DRAWINGS REFERENCE DIAGRAM (Dwg. MHP1493)
Page 39 - FA5 WINCH DRAWINGS AND PARTS LISTS TABLE OF CONTENTS; Description
MHD56037 - Edition 5 39 FA5 WINCH DRAWINGS AND PARTS LISTS TABLE OF CONTENTS Description Page No. Drum, Base and Reduction Gear Assembly Drawing (Dwg. MHP0157) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Drum, Base and Reduction Gear Ass...
Page 40 - DRUM, BASE AND REDUCTION GEAR ASSEMBLY DRAWING
40 MHD56037 - Edition 5 DRUM, BASE AND REDUCTION GEAR ASSEMBLY DRAWING (Dwg. MHP0157)
Page 41 - DRUM, BASE AND REDUCTION GEAR ASSEMBLY PARTS LIST
MHD56037 - Edition 5 41 DRUM, BASE AND REDUCTION GEAR ASSEMBLY PARTS LIST Item No. Descriptionof Part Total Qty Part Number Item No. Descriptionof Part Total Qty Part Number • 2 Oil Seal 1 51873 61 Plug 4 71068571 3 Lockwasher 10 50181 62 ‘O’ Ring 4 Order Item 34 4 Capscrew 10 52379 63 Ring Gear 1 •...
Page 43 - MUFFLER ASSEMBLY DRAWING AND PARTS LIST; K5B Motor Muffler
MHD56037 - Edition 5 43 MUFFLER ASSEMBLY DRAWING AND PARTS LIST (Dwg. MHP2090) 165 169 170 162 161 169 165 170 K5B Motor Muffler and K5B ControlValve with Long Exhaust Manifold K5C2 Control ValveMuffler Assembly K5B Motor Muffler Valve with Muffler with Round Exhaust Manifold K5B Control 957 958 959...
Page 44 - K5B MOTOR ASSEMBLY DRAWING
44 MHD56037 - Edition 5 K5B MOTOR ASSEMBLY DRAWING (Dwg. MHP2093) 200 216 228 205 203 201 202 204 205 208 207 213 206 210 209 206 213 229 230 226 225 225 231 232 233 234 237 3 217 4 236 235 231 240 243 250 251 252 205 203 201 200 205 209 247 246 208 207 204 202 228 243 244 214 251 253 1 96 255 254 1...
Page 45 - K5B MOTOR ASSEMBLY PARTS LIST
MHD56037 - Edition 5 45 K5B MOTOR ASSEMBLY PARTS LIST Item No. Descriptionof Part Total Qty Part Number Item No. Descriptionof Part Total Qty Part Number 199 Motor Assembly 230 Oil Slinger 1 K5B-540 with Control Valve * 1 K5B-546M-S 231 Crank Assembly 1 K5B-A516 without Control Valve * K5B-546LM-S 2...
Page 46 - DISC BRAKE ASSEMBLY DRAWING
46 MHD56037 - Edition 5 DISC BRAKE ASSEMBLY DRAWING (Dwg. MHP0152) Note: Tee fitting for us e on u nit s with Di s c a nd A u to B a nd Br a ke only. 3 5 33 2 3 22 21 27 24 29 3 0 3 1 2 8 20 3 6 44 16 17 1 8 26 2 8 20 19 7 6 5 1 2 12 15 11 10 9 8
Page 47 - DISC BRAKE ASSEMBLY PARTS LIST; Item
MHD56037 - Edition 5 47 DISC BRAKE ASSEMBLY PARTS LIST Item No. Descriptionof Part Total Qty Part Number 64 Brake Assembly (includes items 1, 7 through 32 and 44) 1 11366 1 Capscrew (with Disc Brake) 8 51471 2 Oil Seal 1 51873 6 Motor Adapter 1 14227 7 Shaft Extender 1 10594 8 Brake Reaction Plate 1...
Page 48 - DRUM BRAKE ASSEMBLY DRAWING
48 MHD56037 - Edition 5 DRUM BRAKE ASSEMBLY DRAWING (Dwg. MHP0153)
Page 49 - DRUM BRAKE ASSEMBLY PARTS LIST
MHD56037 - Edition 5 49 DRUM BRAKE ASSEMBLY PARTS LIST Item No. Descriptionof Part Total Qty Part Number Manual Brake Automatic Brake 80 Drum with band brake 1 Refer to page 42 82 Side Rail, Right Hand 1 Refer to page 42 83 Side Rail, Left Hand Common Parts: 101 Pin † 2 4308-S 4308-S 102 Cotter Pin ...
Page 50 - K5C2 CONTROL VALVE ASSEMBLY DRAWING
50 MHD56037 - Edition 5 K5C2 CONTROL VALVE ASSEMBLY DRAWING (Dwg. MHP2036) * Item 920 is not sold with any valve parts, must be purchased separately. 0.720 Option a l New S tyle Pi s ton (922) S hown From C a p (906) End Old Ver s ion K5C Control V a lve Note: Br a ke Fitting 94 8 949 902 90 3 901 9...
Page 51 - K5C2 CONTROL VALVE ASSEMBLY PARTS LIST
MHD56037 - Edition 5 51 K5C2 CONTROL VALVE ASSEMBLY PARTS LIST Note 1: For service kit descriptions and additional information on related publication(s) refer to Tables on page 76. Note 2: Item 922 not sold separately, includes items (6) each of 901 and 902, items 904-907, 918, 921 and 923. Note 3: ...
Page 52 - EMERGENCY STOP AND OVERLOAD K5C2-EX VALVE ASSEMBLY DRAWING
52 MHD56037 - Edition 5 EMERGENCY STOP AND OVERLOAD K5C2-EX VALVE ASSEMBLY DRAWING (Dwg. MHP2180) 9 3 5 906 956 912 910 917 711 70 3 707 706 705 704 70 3 702 701 700 940 947 955 902 721 722 916 901 902 90 3 904 905 907 94 8 901 909 9 3 0 9 3 7 9 38 9 3 9 941 942 925 96 3 944 942 942 72 3 726 94 3 71...
Page 53 - EMERGENCY STOP AND OVERLOAD K5C2-EX VALVE PARTS LIST
MHD56037 - Edition 5 53 EMERGENCY STOP AND OVERLOAD K5C2-EX VALVE PARTS LIST Note 1: For service kit descriptions and additional information on related publication(s) refer to Tables 75. Note 2: Item 922 not sold separately, includes items (6) each of 901 and 902, items 904-907, 918, 921 and 923. No...
Page 54 - K5B CONTROL VALVE ASSEMBLY DRAWING AND PARTS LIST
54 MHD56037 - Edition 5 K5B CONTROL VALVE ASSEMBLY DRAWING AND PARTS LIST (old style) (Dwg. MHP0165) Item No. Descriptionof Part Total Qty Part Number 260 Valve Assembly (Includes item 96, 246 and 300 through 318) 1 Not available; order K5C2-X Valve on page 51 96 Lockwasher 4 50200 246 Grease Fittin...
Page 55 - FULL FLOW REMOTE CONTROL VALVE ASSEMBLY DRAWING AND PARTS LIST
MHD56037 - Edition 5 55 FULL FLOW REMOTE CONTROL VALVE ASSEMBLY DRAWING AND PARTS LIST (Dwg. MHP2092) Item No. Descriptionof Part Total Qty Part Number 1 Capscrew 5 51471 113 Hose End 2 51029 115 Hose (bulk) As Req’d 50923 243 Gasket 1 K5B-928 253 Exhaust Cover 1 KK5B-276M 260 Control Valve Assembly...
Page 56 - REMOTE PILOT AIR CONTROL (OPTIONAL) ASSEMBLY DRAWING
56 MHD56037 - Edition 5 REMOTE PILOT AIR CONTROL (OPTIONAL) ASSEMBLY DRAWING (Dwg. MHP0167) 552 552 113 113 113 97 96 335 355 334 333 357 115 Remote Pilot Lever Throttle 348 358 343 115 115 To Brake 115 324 324 324 324 324 340 Old Style Pendant Throttle 348 Remote Pilot Pendant Throttle
Page 57 - REMOTE PILOT AIR CONTROL (OPTIONAL) ASSEMBLY PARTS LIST
MHD56037 - Edition 5 57 REMOTE PILOT AIR CONTROL (OPTIONAL) ASSEMBLY PARTS LIST Item No. Descriptionof Part Total Qty Part Number 96 Lockwasher 4 50200 97 Capscrew 4 51780 113 Fitting, Hose End – Disc Brake Only 8 51029 Fitting, Hose End – Disc and Automatic Drum Brake 10 115 Hose, Bulk As Req’d 509...
Page 58 - REMOTE PENDANT ASSEMBLY DRAWINGS; Pendant without Emergency Stop
58 MHD56037 - Edition 5 REMOTE PENDANT ASSEMBLY DRAWINGS Pendant without Emergency Stop (Dwg. MHP2346) Pendant with Emergency Stop (Dwg. MHP1677) 445 446 444 440 456 447 453 448 449 451 470 452 443 455 454 457 458 442 444 445 446 455 443 440 446 447 448 443 454 451 443 452 449 443 451 457 458 452 44...
Page 59 - REMOTE PENDANT ASSEMBLY PARTS LIST
MHD56037 - Edition 5 59 REMOTE PENDANT ASSEMBLY PARTS LIST Item No. Description of Part Total Qty Part Number With E-Stop Without E-Stop 353 Pendant Assembly* 1 PHS2E PHS2E-U 440 Lifting Eye 1 64222332 441 Emergency Stop Valve 1 95790108 - - - 442 Plug 1 95790106 • 443 ‘O’ Ring 2(5) 58209229 444 Plu...
Page 60 - PILOT AIR CONTROL VALVE (OPTIONAL) ASSEMBLY DRAWING AND PARTS LIST
60 MHD56037 - Edition 5 PILOT AIR CONTROL VALVE (OPTIONAL) ASSEMBLY DRAWING AND PARTS LIST (Dwg. MHP0141) Item No. Descriptionof Part Total Qty Part Number 510 size 355 Valve Assembly (includes items 265 through 280) 1 20993 265 End Cap 1 71136725 266 Gasket 2 71136733 267 Valve Body 1 Not sold sepa...
Page 61 - DRUM LOCKING PIN (OPTIONAL) ASSEMBLY DRAWING AND PARTS LIST
MHD56037 - Edition 5 61 DRUM LOCKING PIN (OPTIONAL) ASSEMBLY DRAWING AND PARTS LIST (Dwg. MHP0155) 135 135 80 84 137 138 246 140 136 403 135 140 404 138 137 136 304 401 84 OLD STYLE Item No. Descriptionof Part Total Qty Part Number Item No. Descriptionof Part Total Qty Part Number 80 27 inch Standar...
Page 62 - DRUM GUARD ASSEMBLY DRAWING AND PARTS LIST
62 MHD56037 - Edition 5 DRUM GUARD ASSEMBLY DRAWING AND PARTS LIST (Dwg. MHP0154) Item No. Descriptionof Part Total Qty Part Number Standard Flange Tall Flange 149 Drum Guard Assembly (includes items 3, 96 and 150 through 158) 12 inch long drum 1 10925-2 10927-2 16 inch long drum 10925-3 10927-3 24 ...
Page 63 - EMERGENCY STOP VALVE, OVERLOAD ASSEMBLY DRAWING AND PARTS LIST
MHD56037 - Edition 5 63 EMERGENCY STOP VALVE, OVERLOAD ASSEMBLY DRAWING AND PARTS LIST (old style) (Dwg. MHP1341) Item No. Descriptionof Part Total Qty Part Number Item No. Descriptionof Part Total Qty Part Number 96 Washer 2 50200 423 Valve, Shut-off 1 25541 113 Hose End 7 51029 424 Fitting, Nipple...
Page 64 - PENDANT CONTROL ASSEMBLY DRAWING AND PARTS LIST
64 MHD56037 - Edition 5 PENDANT CONTROL ASSEMBLY DRAWING AND PARTS LIST (old style) (Dwg. MHP0168) Item No. Descriptionof Part Total Qty Part Number 348 Fitting, Adapter 3 71048268 352 Pendant Assembly (includes items 370–381 and 383) 1 No longer available Order item 353 on page 59 370 Pendant Handl...
Page 65 - SERVICE NOTES
Page 66 - EMERGENCY STOP OVERLOAD ASSEMBLY DRAWING
66 MHD56037 - Edition 5 EMERGENCY STOP OVERLOAD ASSEMBLY DRAWING (Dwg. MHP1488)
Page 67 - EMERGENCY STOP OVERLOAD ASSEMBLY PARTS LIST
MHD56037 - Edition 5 67 EMERGENCY STOP OVERLOAD ASSEMBLY PARTS LIST Item No. Descriptionof Part Total Qty Part Number Item No. Descriptionof Part Total Qty Part Number 26 Fitting, Tee 1 52181 486 Muffler 1 52472 113 Hose End 26 51029 487 Fitting, Connector 1 71078158 115 Hose (bulk) As Req’d 50923 4...
Page 68 - LIMIT SWITCH ASSEMBLY DRAWING
68 MHD56037 - Edition 5 LIMIT SWITCH ASSEMBLY DRAWING (Dwg. MHP2027)
Page 69 - LIMIT SWITCH ASSEMBLY PARTS LIST
MHD56037 - Edition 5 69 ( LIMIT SWITCH ASSEMBLY PARTS LIST Item No. Descriptionof Part Total Qty Part Number 93 Capscrew 3 51086 96 Lockwasher 6 50200 97 Capscrew 6 51780 115 Hose As Req’d 50923 357 Fitting, Elbow 4 51281 484 Fitting, Elbow 7 52179 501 Retainer (replaces Retainer, item 191, on stand...
Page 70 - PILOT AIR VALVE PLUMBING ASSEMBLY DRAWING
70 MHD56037 - Edition 5 PILOT AIR VALVE PLUMBING ASSEMBLY DRAWING Note: This drawing is for Pilot Air Valve Assembly with Limit Switch. For Remote Pilot Air installation refer to Dwg. MHP0167 on page 56. (Dwg. MHP1679)
Page 71 - PILOT AIR VALVE PLUMBING ASSEMBLY PARTS LIST
MHD56037 - Edition 5 71 PILOT AIR VALVE PLUMBING ASSEMBLY PARTS LIST Item No. Descriptionof Part Total Qty Part Number 96 Washer 4 50200 97 Capscrew 4 51780 113 Fitting, Hose End 5 51029 115 Hose (bulk) As Req’d 50923 269 Capscrew 2 71030118 324 Fitting, Elbow 2 52182 333 Capscrew 4 54681 334 Washer...
Page 72 - TENSIONING MANIFOLD ASSEMBLY DRAWING
72 MHD56037 - Edition 5 TENSIONING MANIFOLD ASSEMBLY DRAWING (Dwg. MHP2028)
Page 73 - TENSIONING MANIFOLD ASSEMBLY PARTS LIST
MHD56037 - Edition 5 73 TENSIONING MANIFOLD ASSEMBLY PARTS LIST Item No. Descriptionof Part Total Qty Part Number 113 Fitting, Hose End 3 51029 115 Hose (bulk) As Req’d 50923 248 Gasket 2 K5B-547 260 Control Valve Assembly 1 K5B-REMOTE 343 Shuttle Valve 1 50277 701 Washer 4 71320964 702 Capscrew 4 7...
Page 75 - LABELS AND TAGS
MHD56037 - Edition 5 75 LABELS AND TAGS (Dwg. MHP1676) Item No. Descriptionof Part Total Qty Part Number Item No. Descriptionof Part Total Qty Part Number 650 Label and Tag Kit * 1 22261-4-S 654 Product Label 12-16 in. long drum 1 71111777 22261-5-S Product Label 24 in. and longer drum 71109508 Labe...
Page 76 - KITS; Part
76 MHD56037 - Edition 5 KITS Description of Kit Part Number Automatic Brake Kit (converts manual band brake to automatic band brake). Refer to Dwg. MHP0153on page 48; includes items 102, 105 through 115, 117 through 120, 129 and 134. FA5-ABK Disc Brake Kit (adds disc brake to winch). Refer to Dwgs. ...
Page 77 - PARTS ORDERING INFORMATION; Return Goods Policy
MHD56037 - Edition 5 77 PARTS ORDERING INFORMATION Use of other than Ingersoll Rand replacement parts may adversely affect the safe operation and performance of this product. For your convenience and future reference it is recommended that the following information be recorded. Model Number ________...
Page 79 - WARRANTY; LIMITED WARRANTY
MHD56037 - Edition 5 79 WARRANTY LIMITED WARRANTY Ingersoll Rand Company ( I-R ) warrants to the original user its Hoists and Winches (Products) to be free of defects in material and workmanship for a period of one year from the date of purchase. I-R will repair, without cost, any Product found to b...
Ingersoll Rand 2235TIMAX
User Manual
Ingersoll Rand 345MAX
User Manual
Ingersoll Rand 1105MAX-D2
User Manual
Ingersoll Rand 2015MAX
User Manual
Ingersoll Rand 231HA
User Manual
Ingersoll Rand 2125PTIMAX
User Manual
Ingersoll Rand 35MAX
User Manual
Ingersoll Rand 2130
User Manual