Ingersoll Rand 2925Ti - Manuals

Ingersoll Rand 2925Ti – Manual in PDF format online.

Manuals:

Manual Ingersoll Rand 2925Ti

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - WARNING; Lubrication; Ingersoll Rand; Disassembly; General Instructions; Disassembly of the Quick-Change Anvil; NOTICE; Disassembly of the Impact Mechanism; NOTICE; ” and the bottom Hammer “B; NOTICE

EN-2 04584348_ed2 WARNING Always wear eye protection when operating or performing maintenance on this tool.Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool. Note: W...

Page 3 - Assembly; inner

04584348_ed2 EN-3 3. Hold the Hammer Frame firmly and, without disturbing the Hammers, gently lift the Anvil, simultaneously rotating it clockwise about 1/8 of a turn, from Hammer Frame. 4. With Anvil removed, lift out the two Hammer Pins. NOTICE The twin Hammers are now free to slide from the Hamme...

Page 4 - Install the assembled Front End Plate and Bearing over; Assembly of the Reverse Valve; Install the Reverse Valve in the reverse valve bushing; Slide the Reverse Lever Spring (20) over the shaft of the; Assembly of the Impact Mechanism

EN-4 04584348_ed2 (Dwg. TPD1921) NOTICE If more power is needed for forward operation than for reverse operation, install the Cylinder with exhaust ports to the RIGHT of top dead center (1 o’clock position). 7. Install the assembled Front End Plate and Bearing over the front, splined end of the Roto...

Ingersoll Rand Manuals