InFocus P760 - Manuals

3 Introduction Your new InFocus projector is specifically designed for home theater appli-cations. It sets a high standard using the latest DLP™ technology and new DNX video processing from Pixelworks™. Whether you are watching mov-ies or High Definition broadcasts or playing the latest video game, ...

4 Connector Panel The projector provides the following connection options: • M1-DA/DVI (Digital Visual Interface) • HDMI™ (High Definition Multimedia Interface) • Component (RCA) • SCART RGB (you must enable this connector, see page 26) • S-video • Composite video (RCA) See “Video connectors” on pag...

5 Positioning the projector To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some guidelines: • Position the projector on a flat surface at a r...

6 Choosing the aspect ratio Aspect ratio is the ratio of the image width to image height. HDTV and most DVDs are 16:9, which is the default for this projector. When in 4:3 mode the projector places black bars on both sides of the image. Native mode centers the image and turns off the internal scaler...

7 Video connectors The first step for connecting video is determining what type of output con-nectors your video device has. If there is more than one output, select the one with the highest quality. The best quality ranking, with 1 being the highest, is: 1 M1-DA/DVI or HDMI (both are digital inputs...

8 Connecting a video device You can connect video devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles, HDTV receivers, and TV tuners to the projector. Connect the audio from your video device to your stereo system to get sound. You can connect the projector to most vi...

9 Digital connections The M1-DA/DVI and HDMI (High-Definition Multimedia Interface) con-nectors are digital and yield the highest quality image. It is common for these signals to be encrypted with HDCP (high-bandwidth digital-content protection). Your new projector ships standard with decryption cod...

10 Displaying an image Connect the power cord to the Power connector on the back of the projector and to your electrical outlet. NOTE : Always use the power cord that shipped with the projector. Press the Power button on the remote or keypad. The LED flashes green and the fans start to run. When the...

12 Shutting down the projector Power Save The projector also has a Power Save feature that automatically turns the lamp off after no active sources are detected and no user interaction with the projector is performed for 20 minutes. By default, this feature is on. See page 26. Sleep Timer The projec...

15 image not sharp adjust Sharpness in the Picture>Advanced menu correct image image upside down turn off ceiling in Settings>System menu correct image A B A B A B AB A B

16 image reversed left to right turn off rear in Settings>System menu correct image projected colors don’t match source adjust color, tint, color temperature, brightness, contrast in the menus correct image lamp won’t turn on, LED blinking red make sure vents aren’t blocked, turn off the projecto...

17 Still need assistance? If you need assistance, visit our website at www.infocus.com or call us. See the User ’s Guide for support contact information. This product is backed by a limited warranty . An extended warranty plan may be purchased from your retailer or dealer. When sending the projector...

18 Using the remote control The remote uses two (2) provided AA batteries. They are easily installed by sliding the cover off the remote’s back, aligning the + and - ends of the bat-teries, sliding them into place, and then replacing the cover. To operate, point the remote at the projection screen o...

19 Using the keypad buttons Most buttons are described in detail in other sections, but here is an over-view of their functions: Menu –opens the on-screen menus (page 21). Select –confirms choices made in the menus (page 21). Up/Down arrows –navigates to and adjusts settings in the menus (page 21). ...

20 Optimizing video images Your projector has been factory optimized for very good performance no matter what the source. However, if you wish to make further changes you can optimize the image using onscreen menus. For general information on using the menus, see page 21. • Adjust the Keystone, Cont...

21 Using the menus To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) The Main menu appears. Use the arrow buttons to move up and down to high-light the desired submenu, then press the Select button. To change...

23 Presets : This allows you to customize settings and save the settings to be restored later. To restore the factory default settings, choose Factory Reset in the Settings>Service menu. To set a preset for the current source, adjust the image, select Save Settings in the Presets menu, then choos...

25 Color Temperature : changes the intensity of the colors. Select a value. Native means an uncorrected/unchanged color temperature. Other values change the white point of the colors. 6500K is generally used for film con-tent and 9300K is used for TV video. Color Control : allows you to individually...

29 Maintenance Cleaning the lens 1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth. • Avoid using an excessive amount of cleaner, and don’t apply the cleaner directly to the lens. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. 2 Lightly wipe the cleaning c...

30 4 Push the 2 tabs on the lamp door toward the front of the projector and lift the lamp door off. 5 Loosen the two captive screws that attach the lamp housing to the pro-jector. 6 Detach the lamp connector from the projector by depressing the locking tab on the connector and lightly pulling it fre...

32 Appendix Red LED behavior and projector errors If the projector is not functioning properly and the LED is blinking red, con-sult Table 4 to determine a possible cause. There are two-second pauses between the blinking cycles. Visit our website for more details on the red LED error codes. Table 4:...

33 Remote control discrete codes You can use these codes to program another remote to learn the projector ’s remote functions. To activate discrete mode, press and hold the Custom button on the remote for 10 seconds. The back light blinks twice when discrete mode is entered. The remote buttons are n...

34 Projector dimensions for ceiling mount installations All values in millimeters (mm). 234.5 126.5 361 121 40.25 57 64 344.25 167 40.5 24.5 163 227.5 245.5

35 Supported video formats Connector Signal Type Supported formats HDMI Digital RGB and YCrCb 480i/50Hz/60Hz480p/50Hz/60Hz576i/50Hz/60Hz576p/50Hz/60Hz720p/50Hz/60Hz1080i/50Hz/60Hz1080i/50Hz (Australia) Digital RGB video via M1-to-DVI cable Analog RGB video via M1-to-VESA cable M1-DA YPrPb video via ...

36 RS-232 terminal specifications for IN74 and IN76 Communication configuration To control the projector from an LCD control panel, connect an RS-232 cable to the serial control connector on the projector and set your computer ’s serial port settings to match this communication configuration: Comman...

37 Supported commands Function Command Range Default Auto Ceiling Enable ACL 0-1 0 Auto Color Space enable ACS 0-1 1 Auto Image AIM 0-1 0 Aspect Ratio ARZ 0-40 = Native1 = 4:3 2 = 16:93 = Letterbox4 = Natural Wide 1 Auto Power Enable APO 0-1 0 Auto Source Enable ASC 0-1 1 Auto Video Standard Enable ...