InFocus INF7001A - Manuals

Page 6 WHAT’S INCLUDED Warranty Quick Start Guide HOME INFO RESIZE SWAP VOL UP VOL DOWN BACK MUTE CONTRAST BRIGHTNESS ON/OFF INPUT MENU PIP INPUT AUDIO POSITION OK POWER i USB cable Remote control (batteries not included) Documentation 1920 x 1080 monitor Power cord (varies per country) For addition...

Page 7 INF7001a Hardware Guide SETUP Mounting This product does not ship with mounting accessories. Only use commercially manufactured mounting accessories which meet this product's specifications and follow the manufacturer installation instructions. • Only use properly rated wall and stand mountin...

Page 8 Connecting to Other Devices A full range of digital and analog video inputs and audio source devices can be connected to the connection panels on the back and side of the monitor. Available jacks include: HDMI In (2), PC In (1), Composite Video (1), Component RCA (1), RS232 (1), Audio In 3.5m...

Page 9 INF7001a Hardware Guide Connecting AC Power 1) Connect one end of the AC power cord to the AC In jack on the back of the monitor. 2) Connect the other end of the AC power cord to an AC outlet. 3) Press the power switch. (The LED on the front of the monitor turns on.) NOTES: • Your monitor sho...

Page 10 USING THE REMOTE The remote uses two (2) AAA batteries (not included). Install the batteries by removing the cover from the remote’s back, aligning the + and – ends of the batteries, sliding them in place and replacing the cover. To operate, point the remote at the monitor sensor at the bott...

Page 12 USING THE KEYPAD The keypad, located on the side of the monitor, has the following buttons: VOL VOL ^ CH CH ^ MENU INPUT ^ ^ Power button: Switches the power on or puts the monitor into Standby. Input button: Turns the Source menu on allowing the user to change sources. Saves changes/selecti...

Page 14 Picture Menu Sel Adjust Enter Back Quit < > < < PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR TEMPERATURE COLOR CONTROL PICTURE MODE PICTURE RESET NATIVE STANDARD NO 70 50 50 100 100 100 RED BLUE GREEN Brightness: changes the intensity of the image. Range: 0-100. (Default 70.) Cont...

Page 15 INF7001a Hardware Guide Screen Menu Sel Adjust Enter Back Quit < > < < SCREEN H POSITION V POSITION CLOCK CLOCK PHASE ASPECT RATIO SCREEN RESET 50 50 50 50 WIDE NO H Position: adjusts the horizontal position of the image. Range: 0-100. (Default 50.) V Position: adjusts the vertic...

Page 16 Audio menu Sel Adjust Enter Back Quit < > < < AUDIO SPEAKER AUDIO SOURCE AUDIO RESET INTERNAL MONDOPAD NO Speaker: controls whether both the internal and external speakers (sound bar, etc.) or just external speakers are used. Options include: Internal (both internal and external ...

Page 17 INF7001a Hardware Guide PIP menu Sel Adjust Enter Back Quit < > < < PIP PIP SIZE PIP AUDIO PIP RESET SMALL MAIN NO PIP Size: changes the size of the PiP window used in the Corner-to-Corner configuration. Options include: Small (default), Middle and Large. PIP Audio: switches the ...

Page 18 Configuration 1 Sel Adjust Enter Back Quit < > < < CONFIGURATION 1 LANGUAGE AUTO SOURCE OPERATION MODE CONFIGURATION RESET FACTORY RESET ENGLISH YES AIO NO NO Language: switches the OSD menu language. Auto Source: When enabled, automatically searches for an active source. Options...

Page 19 INF7001a Hardware Guide Configuration 2 Sel Adjust Enter Back Quit < > < < CONFIGURATION 2 OSD TURN OFF OSD H POSITION OSD V POSITION MONITOR INFORMATION 10 50 50 OSD Turn Off: controls how many seconds the OSD menu remains on the screen Range: 5-120 (seconds). (Default: 45) OSD ...

Page 20 Advanced Option Sel Adjust Enter Back Quit < > < < ADVANCED OPTION INPUT RESOLUTION GAMMA SELECTION OVER SCAN SCAN CONVERSION IR CONTROL KEYBOARD CONTROL MONITOR ID DDC/CI ADVANCED OPTION RESET MODE1 ON NORMAL UNLOCK ON NO Input Resolution: sets the resolution of the VGA input. T...

Page 21 INF7001a Hardware Guide TROUBLESHOOTING SYMPTOM POSSIBLE SOLUTIONS No power • Verify the power cord is properly connected to the power outlet and to the monitor. • Verify the power switch is ON and that the Power button on the remote or keypad has been turned on (the front LED should be whit...

Page 23 INF7001a Hardware Guide LED Indicators FRONT LED (near IR sensor) SOLUTION Off • The monitor is powered off. Press the Power button on the remote or keypad. If that does not work: 1) verify the power cord is properly connected to the power outlet and to the monitor; 2)verify that the power s...

Page 24 SPECIFICATIONS To read the latest product specifications, be sure to visit our support website at www.infocus.com/support, as specifications are subject to change. Size (viewable) 69.51” (176.56cm) diagonal Dimensions (without stand) 65.3" W x 39.5 H x 4.1" D (165.86 x 100.33 x 10.41...

Page 25 INF7001a Hardware Guide LIMITED WARRANTY InFocus Limited Warranty For InFocus Branded Hardware Products Only LIMITED WARRANTY. InFocus’s warranty obligations for the hardware products are limited to the terms set forth herein. InFocus warrants the InFocus-branded hardware products against de...

Page 26 ANY PROGRAMS OR DATA OTHER THAN SOFTWARE INSTALLED BY INFOCUS WHEN THE PRODUCT IS MANUFACTURED. To enable InFocus to provide the best possible support and service during the Limited Warranty Period, you will be required to: • Maintain a proper and adequate environment, and use the InFocus ha...

Page 27 INF7001a Hardware Guide TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED. AS PERMITTED BY APPLICABLE LAW, INFOCUS SPECIFICALLY DISCLA...

Page 28 Technical Support or an ASP will help determine whether your product requires service and, if it does, will inform you how InFocus will provide it. You must assist in diagnosing issues with your product and follow InFocus’s warranty processes. InFocus may restrict service to the country wher...

Page 30 APPENDIX Calibration Tool 1) From your Start menu, navigate to All Programs>PQLabs Software>MultiTouch Platform, and double-click MultiTouchPlatform . 2) The MultiTouch Platform window displays. 3) Using a mouse and keyboard, click Calibrate . The Reset Touchscreen Data window displays...

Page 31 INF7001a Hardware Guide 4) Do not touch the screen until the white cross and the message Touch + for more than 1 second " displays. 5) Using a stylus (or your finger), touch and hold the white cross until the cross turns green and the message Please release your finger displays. 6) Repea...

Page 32 Calibration Troubleshooting Tool 1) From your Start menu, navigate to All Programs>PQLabs Software>MultiTouch Platform, and double-click MultiTouchPlatform . 2) The MultiTouch Platform window displays. 3) Click Diagnose . The Start MultiTouch Doctor window displays. 4) Click Start .

Page 33 INF7001a Hardware Guide 5) If a check mark appears, the panel has passed that test. If a red X appears, the panel has failed. In that case, follow the instructions in the Details box. 6) If instructed to send a report to the PQ Labs team, click Send report , type your information, and click ...

Page 35 INF7001a Hardware Guide JTouch 70” 顯示器 I/O port 介紹前/後面板 RS232 HDMI1 HDMI2 COMPONENT VIDEO PC IN TOUCH CONTROL L R Audio Audio OUT IN 1 IN 2 A B C TOUCH CONTROL A TOUCH CONTROL 將 USB 纜線從顯示器連接至外部電腦，以便使用觸控模組。 HDMI1 HDMI2 COMPONENT VIDEO PC IN B VIDEO 接受來自外部裝置（例如 VCR 或 DVD 播放器）的 VIDEO 信號。 HDMI2 ...