Ikea DW60- Manuals

Control panel 1 2 3 5 4 A B 1 On/off button 2 Half-load button 3 Programme selection/cancel button (SELECT/CANCEL) 4 Indicator lights 5 Programme indicator lights Indicator lights The indicator light comes on when the washing programme is completed. Auxiliary functions: • Level of the water softener...

Washing programmes Washing programmes Programme Degree of soil Type of load Programme description Half-load op- tion Intensive Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying yes Normal Normal soil Crockery, cutlery, pots and pans Pre...

3 Fill the salt container with 1 litre of water (only the first opera- tion). 4 Fill the salt container with 1,5-2,0 kg of salt. Use the salt fun- nel supplied. 5 Make sure that there is no grain of salt out- er of the salt com- partment. 6 It is normal that water overflows from the salt container w...

Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.). • Before you load cutlery and dishes, do these steps: – Remove all food remainings and debris. – Make burnt, remaining food in pans soft. • While you load cutlery and dishes, do these steps: – Load hol...

A A Do these steps to move the upper basket to the upper or lower position: 1. Move the front runner stops (A) out. 2. Pull the basket out. 3. Put the basket in the upper or lower posi- tion. 4. Replace the front runner stops (A) in their initial position. Caution! If the basket is in the upper posi...

1. Make sure that the detergent tablets are applicable for your water hardness. Refer to the instructions from the manufacturer. 2. Set the lowest levels of water hardness and rinse aid dosage. It is not necessary to fill the salt container and the rinse aid dispenser. Do these steps when the drying...

3. For better drying results, keep the door ajar for some minutes before you remove the dishes. Let the dishes cool down before you remove them from the appliance. Hot dishes are easily damaged. Removing the load • First remove items from the lower basket, then from the upper basket. • There can be ...

Frost precautions Caution! Do not install the appliance where the temperature is below 0 °C. The manufacturer is not responsible for damage because of frost. If not possible, empty the appliance and close the door. Disconnect the water inlet hose and remove water from the water inlet hose. What to d...

Problem Possible cause Solution There are streaks, milky spots or a blu- ish coating on glasses and dishes Wrong dosage of rinse aid. Decrease the rinse aid dosage. Dry water drop signs on glasses and dishes Wrong dosage of rinse aid. Increase rinse aid dosage. The detergent can be the cause. Use di...

If a repair is necessary, the appliance must be easily accessible for the engineer. Put the appliance adjacent to a water tap and a drain. For the venting of the dishwasher only water fill, water drain and power supply cable open- ings are necessary. Water connection This appliance has a special inl...

Electrical connection Warning! The manufacturer is not responsible if you do not follow these safety precautions. Ground the appliance according to safety pre- cautions. Make sure that the rated voltage and type of power on the rating plate agree with the volt- age and the power of the local power s...