IBM SENG-3002-01 - Manuals

Product Recycling and Disposal Components of the system, such as structural parts and circuit cards, can berecycled where recycling facilities exist. IBM does not currently collect and recycleused IBM products from customers in the United States other than those productsthat are involved in trade-in...

Installation Instructions Before you begin __ 1. Take a minute to become familiar with these instructions. Note that you maynot complete every step in this instruction. __ 2. These instructions contain steps on how to install memory (main storage cards) , including adding another 2884 card assembly,...

__ 9. If you encounter difficulties during the installation, contact your authorizeddealer or service provider. Powering off the system unit __ 1. Set the System performance adjustment to a value other than option 0 . __ a. On an iSeries command line, type WRKSYSVAL (QPFRADJ) and press Enter. __ b. ...

__ 5. Do you have a new 2884 card assembly to install in your 820 system unit? Yes No ↓ Go to step 7 on page 5. __ 6. Remove the empty card assembly C . Figure 2. Location of card assembly 2884 in a 270 system unit 4 30xx Memory Card Installation V5R1

__ 7. Remove the 2884 card assembly B or C from the system unit by doing the following: __ a. Unlatch the two blue latches on the 2884 until the card assemblyslightly “pops” out. __ b. Pull on both latches at the same time to remove the card assemblyfrom the system unit. __ c. Turn the card assembly...

__ 2. Remove the blank filler cards from the next available positions by doing thefollowing: __ a. Push outward on the latches A that are located at each end of the filler card, Figure 5 on page 7. __ b. Remove the filler card from the card socket and discard it. __ 3. Find the package that contains...

__ 6. Install the remaining memory cards. __ 7. When you finish installing all the memory cards, turn the card assemblyover, and slide it into the system unit. Push on both card latches at the sametime. Close the latches when you cannot push the card assembly any furtherinto the system unit. __ 8. R...

__ 8. Install the second memory card. __ 9. Do you have any other adapter cards or devices to install? No Yes ↓ If you have another device such as an adapter card, a tape unit, ordisk units to install, go to the instructions that came with thatdevice. Go to “Installing system unit covers”. Installin...

__ 4. DANGER An electrical outlet that is not correctly wired could place hazardousvoltage on metal parts of the system or the products that attach to thesystem. It is the customer’s responsibility to ensure that the outlet iscorrectly wired and grounded to prevent an electrical shock.(RSFTD201) Plu...

__ a. Press the Mode Select button until the Manual modeindicator (a small hand) lights up. __ b. Press the Increment/Decrement push button until 02 appears in the Function/Data display. __ c. Press the Enter push button on the control panel. __ d. Press the Increment/Decrement push button until B a...

Note: If the status is not Operational, check the memory cards. __ g. If you have a printer, print the configuration list. Note: To print the hardware resources list, press F12 one time. When the Logical Hardware Resources menu appears, press F6 . __ h. To return to the Main Menu, press F3 three tim...

Unit Covers Locate the diagram of the unit you are working on. If you have a 270 system unitin a rack, go to “270 unit in a rack” on page 16. 270 and 820 System Units To access the PCI card location, you need to remove the back cover and the sidecover: __ 1. Place your hand near the bottom of the ba...

System unit control panel Go to the front of your system unit. Open the control panel door. Your control panel looks like either Figure 9 or Figure 10 on page 18. Refer to thecontrol panel for your unit. A Power On Light v A blinking light indicates power to the unit. v A constant light indicates th...

Notices This information was developed for products and services offered in the U.S.A.IBM may not offer the products, services, or features discussed in this document inother countries. Consult your local IBM representative for information on theproducts and services currently available in your area...

Trademarks The following terms are trademarks of the IBM Corporation in the United States orother countries or both: AS/400AS/400e seriesClient AccessClient Access/400IBMNetFinityOperating System/400OS/400400800-IBM-CALL Microsoft, Windows, Windows NT, and the Windows 95 logo are trademarks orregist...

Readers’ Comments — We’d Like to Hear from You iSeries 270 and 82030xx MemoryCard InstallationVersion 5 Publication No. SENG-3002-01 Overall, how satisfied are you with the information in this book? Very Satisfied Satisfied Neutral Dissatisfied Very Dissatisfied Overall satisfaction h h h h h How sa...

Readers’ Comments — We’d Like to Hear from You SENG-3002-01 SENG-3002-01 Cut or FoldAlong Line Cut or FoldAlong Line Fold and Tape Please do not staple Fold and Tape Fold and Tape Please do not staple Fold and Tape NO POSTAGENECESSARYIF MAILED IN THEUNITED STATES BUSINESS REPLY MAIL FIRST-CLASS MAIL...