IBM SC34-4499-03 - Manuals

Approving the fix . . . . . . . . . . . . . . . . . . . . . . . 81 Checking out a part . . . . . . . . . . . . . . . . . . . . . . 82 Checking in the changes . . . . . . . . . . . . . . . . . . . . 83 Freezing the work area. . . . . . . . . . . . . . . . . . . . 85 Building the application . . . . ....

Creating the build tree for the application . . . . . . . . . . . . . . . 184 Starting the build on the client . . . . . . . . . . . . . . . . . . 189 Putting the build scripts to work . . . . . . . . . . . . . . . . . . 191 Finishing the job and reporting the results to the user . . . . . . . . . ....

Setting up your project options . . . . . . . . . . . . . . . . . . 241 Using your TeamConnection Workframe project . . . . . . . . . . . . 242 Project actions . . . . . . . . . . . . . . . . . . . . . . 242 Part actions . . . . . . . . . . . . . . . . . . . . . . . 243 Using your project: a simple ...

Sample build scripts. . . . . . . . . . . . . . . . . . . . . . 305 Sample parsers . . . . . . . . . . . . . . . . . . . . . . . 306 Sample package files . . . . . . . . . . . . . . . . . . . . . 306 Customer support . . . . . . . . . . . . . . . . . . . . . . 307 Bibliography . . . . . . . . . . . ...

Figures 1. A sample TeamConnection client/server network . . . . . . . . . . 5 2. Sample of a component hierarchy . . . . . . . . . . . . . . . 7 3. Parts, releases, and components . . . . . . . . . . . . . . . . 8 4. Tasks window . . . . . . . . . . . . . . . . . . . . . . 18 5. Components window ....

47. TeamConnection components on separate machines . . . . . . . . . 137 48. Create Builder window . . . . . . . . . . . . . . . . . . . 148 49. Modify Part Properties window . . . . . . . . . . . . . . . . 156 50. Modify Part Properties window . . . . . . . . . . . . . . . . 157 51. Create Builder ...

Notices References in this publication to IBM products, programs, or services do not imply thatIBM intends to make these available in all countries in which IBM operates. Anyreference to an IBM product, program, or service is not intended to state or imply thatonly that IBM product, program, or serv...

Trademarks The following terms are trademarks of International Business Machines Corporation inthe United States and/or other countries: AIX® NetView® C/370™ OpenEdition® C Set ++® Operating System/2® DB2® OS/2® DB2 Universal Database® SOM® IBM® SOMobjects@tm; MVS™ TeamConnection™ MVS/ESA™ VisualAge...

Adobe, the Adobe logo, Acrobat, the Acrobat logo, Acrobat Reader, and PostScript aretrademarks of Adobe Systems Incorporated. Other company, product, and service names may be trademarks or service marks ofothers. xvi User’s Guide

About this book This book is part of the documentation library supporting the IBM TeamConnectionlicensed programs. It is a guide for client users. For additional information when performing TeamConnection tasks, refer to the Commands Reference when entering commands or online help when using the gra...

v Italics are used to indicate the first occurrence of a word or phrase that is defined in the glossary. They are also used for information that you must replace. v Bold is used to indicate items on the GUI. v Monospace font is used to indicate exactly how you type the information. v File names foll...

Chapter 1. An introduction to TeamConnection TeamConnection provides an environment and tools to make software development runsmoothly, whether your development team is small or large. Using TeamConnection,you can communicate with and share data among team members to keep up with themany tasks in th...

Topic and description Page Developing products using TeamConnection: v Getting familiar with the interfaces v The basics of using TeamConnection v More about defects and features v Following TeamConnection processes 16 Using TeamConnection to build applications: v Build concepts v Installing build a...

TeamConnection family servers control all data within the TeamConnection environment. Data stored in a family server’s database includes: v Text objects, such as source code and product documentation v Binary objects, such as compiled code v Modeled objects that are stored in the information model b...

Check out To get a copy of a part so that you can make changes to it. Check in To put the changed part back into TeamConnection. Extract To get a copy of the part without making changes to the current version in TeamConnection. Edit To change a part from within TeamConnection using a specified edito...

v The users who have access to the component and the level of access each userhas. This information makes up the component’s access list . v The users who are to be notified about changes to the component. This set of usersis called the notification list . v The process by which the component handle...

track of all of these changes, even when more than one user updates the same part atthe same time. To make this possible, TeamConnection uses something called a work area . A work area is a logical temporary work space that enables you to isolate your work onthe parts in a release from the official ...

Defects and features A defect is a record of a problem to be fixed. A feature is a record of a request for afunctional addition or enhancement. Both may be associated with a work area, and bothfollow the processes defined for the component and release that are associated withthe work area. TeamConne...

the parts modified for the specified defect or feature in one release andrecords the status of the defect or feature. The work area moves throughsuccessive states during its life cycle. The TeamConnection actions that youcan perform against a work area depend on its current state. You must use the t...

v Tracks build times of inputs and outputs so that it builds only those parts that are outof date themselves or that have out of date dependents. You can also force a buildregardless of the build times. v Enables you to spread the build over multiple machines running at the same time orinto multiple...

Part 2. Developing a product using TeamConnection Chapter 2. Getting familiar with the TeamConnection client interfaces . . . 17 Using the GUI. . . . . . . . . . . . . . . . . . . . . . . . 17 Starting the GUI . . . . . . . . . . . . . . . . . . . . . . 18 Stopping the GUI . . . . . . . . . . . . . ...

Verifying and testing part updates . . . . . . . . . . . . . . . . 60 Extracting a part . . . . . . . . . . . . . . . . . . . . . 62 Checking out the part one more time . . . . . . . . . . . . . . 63 Checking the part back in . . . . . . . . . . . . . . . . . . 64 Freezing the work area. . . . . . ....

Chapter 2. Getting familiar with the TeamConnection clientinterfaces TeamConnection provides several interfaces that you can use to access data: v A graphical user interface based on industry standards. v A command line interface that lets you type TeamConnection commands from aprompt or from within...

If you are using AIX, HP_UX, or Solaris and are about to use the GUI for the first time,you need to do the following tasks: 1. See Configure the environment variables in the .profile in the Getting Started with the TeamConnection Clients manual. 2. See Ensure that the TeamConnection client command i...

Initially, a set of default tasks appears in your Tasks window. As you become morefamiliar with TeamConnection and see what tasks you do most often, you can change,delete from, and add new tasks to this list. To learn how to do this, select How do Ifrom the Help pull-down menu, and then select Updat...

Using the Settings notebook The TeamConnection GUI provides a Settings notebook in which you can set defaultvalues for your working environment. To open the Settings notebook, select Settingsfrom the Windows pull-down menu. You can set the following values; for moreinformation about them, refer to t...

On the Extract page: v Destination directory v Read-only v Expand keywords On the Pool page: v Pool Online help information Online help information is available from anywhere in the TeamConnection GUI. Usethe online help when you need more information about a topic or task. TeamConnection offers two...

The Quick Commands Reference is a booklet that lists the syntax of each TeamConnection command. You can also become familiar with the commands by looking at the contents of the logfile where TeamConnection stores the commands that are issued as you use the GUI.This file is specified in the Log file ...

Chapter 3. The basics of using TeamConnection All users of TeamConnection perform a number of basic tasks, such as checking partsout of TeamConnection and then back in, and testing and verifying part changes. Beforeyou start doing these tasks, you need to understand the basic concepts behind them;th...

From a command prompt, you can issue the following command to view the componentstructure. teamc report -view -raw bCompView -where "name='root'" Authority to perform tasks As a TeamConnection user, you are automatically given the authority to perform somebasic tasks. You can: v Open defects...

Note: You can issue queries to generate reports of data from tables and views using the -view action flag. If you do not specify selection criteria, such as the fieldsand the search conditions you want to use, the report query selects all entries forthe table or view indicated that the user has auth...

BuildView Use when you want to search for information related to building yourapplication, such as viewing a build tree, or when you want to do build actions. PartFull Use when you want to search for parts across releases, components, or workareas. For example, you want a list of all the optics.c pa...

version of the work area. For example, you might be adding a major feature to thecode, and you want to be able to return to something that works in case the applicationno longer builds. When you integrate a work area or commit a driver, the work area isfrozen automatically. Naming your work areas Wh...

Use the online help facility if you need assistance when creating parts. Naming your parts If your organization has a naming convention, be sure to follow it when naming yourparts. When the naming convention is not followed, everybody in your organization canhave trouble locating parts. Part names c...

Output The part will be a generated output from the same build that creates its parent part. In other words, both the parent part and this child part areoutputs when the parent part is built. Dependent The part will be needed for the build operation of its parent to complete, butit will not be passe...

Before getting parts from TeamConnection, you might want to find out if thedevelopment mode for the release is concurrent or serial. To determine the mode, viewthe information about the specific release. To do this, select View from the Selectedpull-down menu on the Releases window. Working with com...

Getting parts from TeamConnection Checking out a part implies that you intend to modify it; extracting a part merely givesyou a copy of the part. Normally, when you extract a part, you do not plan to changethe current version in TeamConnection. You must have the necessary authority to a component be...

When you want to make changes to a part, you can do one of the following: v Check out one or more parts and edit the parts on your workstation. When you finishmaking changes to the parts, you check them back in. v Edit a part from within the TeamConnection GUI using a specified editor. When youexit ...

Versioning work areas TeamConnection creates new versions of work areas whenever you do the following: v Create a work area This is the initial version of a work area. When you create myWorkArea, for example,its version name is myWorkArea:1. v Refresh a work area Refreshing a work area updates it wi...

Versioning drivers TeamConnection creates new versions of drivers whenever you do the following: v Create a driver When you create a new driver, TeamConnection makes two versions of it:myDriver:1, for example and myDriver:2. v Add a work area (driver member) to a driver If you add myWorkArea:1 to my...

Versioning parts TeamConnection versions parts in association with other TeamConnection objects, suchas work areas. If, for example, you create part1 in myWorkArea:1, the current version ofpart1 is myWorkArea:1. If part1 is in release myRelease:2 and work areamyWorkArea:2, then you can view the vers...

Reviewing the design and resource estimates After the resolution has been designed and the resources have been identified,the proposal needs to be reviewed. If the review indicates that work shouldcontinue on the defect or feature, it is accepted. Resolving defects and implementing features Resolvin...

Chapter 4. The states of TeamConnection objects The actions that you can perform on certain TeamConnection objects are controlled bytwo factors: v The process followed by the component and by the release v The current state of the object Certain TeamConnection objects follow certain states through t...

resolution. The component you open a defect or feature against should be onethat manages the parts affected by the enhancement or problem. Use thecomponent descriptions and the structure of your family’s hierarchy to find themost appropriate component. If you open a defect or feature in aninappropri...

The states of work areas A work area is a storage area where you can work on the parts in a release withoutaffecting the ″ official ″ versions of those parts. A work area can be associated with a specific defect or feature, but it does not have to be. These attributes can affect thestate of a workar...

Restrict state Work areas can be moved to the restrict state only when the release includesthe driver subprocess. The work area moves automatically to the restrict statewhen the driver to which it belongs is restricted. If a work area in this state isremoved from the driver, it returns to the integr...

is added to it as a driver member. If all work areas are removed from thedriver, the driver automatically returns to the working state. Work areas can be added to drivers as driver members when the driver is inthe working, integrate, or restrict state and the work area is in the fix state.Adding dri...

v Abstain if unable to assess the results Once all test records have been accepted or abstained, the states of otherobjects change as follows: v Work areas - Go to complete state. v Defects and features - Go to verify state if the component includes theverifyDefect or verifyFeature subprocess; other...

These records are handled by different people and enable you to monitor yourdevelopment progress in different ways. The sequence of creating and handlingverification and test records is as follows: 1. Verification records are created in the notReady state when a defect or feature is accepted. This i...

Chapter 5. Working with no component or release processes To illustrate how to work with objects in a release that does not follow a trackingprocess or component processes, this chapter follows an example of a programmingteam that is developing the control systems for a robot. They are working in a ...

to make some modifications to the parts in this release. This fix will require the tasksnoted in the following table: For information about this task, Go to this page. Accepting the defect 52 Creating a work area 53 Checking out a part 54 Searching for a part 55 Checking in a part 58 Verifying and t...

Command From a command line, he issues the following command: teamc defect -accept 310 -answer program_defect Result The defect goes to the working state. Creating a work area Because the component is not following a design, size, and review process, Alex needsto manually create a work area in which...

Note: 310 is the name of the defect that was opened for the problem, so this is how Alex wants to identify the work area. Command From a command line, he issues the following command: teamc workarea -create -name 310 -release robot_control Result TeamConnection creates a work area named 310 associat...

From the GUI, he: 1. Selects Parts → Check out from the Actions pull-down menu on the Tasks window. 2. Types the following: v optics.c in the Path names field v robot_control in the Release field v 310 in the Work area field 3. Selects OK. Command From a command line, he issues the following command...

He does not select the PartFull choice because he wants to limit his search to aparticular release and work area. He uses PartFull when he wants to search forparts across releases, components, or work areas. 2. Types the following in the Parts Filter window: v robot_control in the Release field v 31...

This command returns a list of all the parts that match the query. After Alex determineswhich part he wants to check out, he issues the following command: teamc part -checkout optics.c -release robot_control -workarea 310 Result A copy of the part optics.c is checked out from TeamConnection and plac...

Thus, work area 310 contains the following parts: brain.c leg.c brain.obj leg.obj brain.exe foot.c arm.c foot.obj arm.obj optics.c (modification 1) hand.c optics.obj hand.obj Work area 310 continues to contain the unchanged parts from the requested releaseview, but now the work area is overlaid with...

Note: For a detailed build example, see “Chapter 15. Building an application: an example” on page 181. Extracting a part Next, Alex tests his modifications in the robot prototype in his office. He extracts theexecutable part from the work area 310. GUI From the GUI, he: 1. Selects Parts → Extract fr...

This action places a copy of the part brain.exe in the current directory. Checking out the part one more time Alex then downloads brain.exe to his robot, runs his test, and determines that themodification did not work: the robot slams into the wall. However, Alex thinks he knowswhat the problem is, ...

Checking the part back in Alex makes his modification and checks the part in. GUI From the GUI, he: 1. Does one of the following to display the Check In Parts window: v Selects Parts → Check in from the Actions pull-down menu on the Tasks window. v Selects the entry on his Tasks window that displays...

Result Now the work area contains the following parts: brain.c leg.c brain.obj leg.obj brain.exe (contains modification 1) foot.c arm.c foot.obj arm.obj optics.c (modification 2) hand.c optics.obj (modification 1) hand.obj Because Alex did not specify that he wanted to save a copy of the work area b...

Command From a command line, he issues the following command: teamc workarea -freeze 310 -release robot_control Result The freeze command saves the work area 310. Thus, TeamConnection takes asnapshot of the work area, with all its parts and their visible versions, and saves it. Alexcan come back to ...

Command From a command line, he issues the following command: teamc workarea -refresh 310 -release robot_control Result This action updates work area 310 with any changes from the release, and it alsofreezes work area 310, if it is not already frozen. Now Alex’s work area contains thefollowing versi...

Command From a command line, he issues the following command: teamc part -build brain.exe -release robot_control -workarea 310 -pool normal Result Fortunately, nothing breaks, so Alex is ready to integrate his changes with the release. Integrating the work area To integrate his changes with the rele...

Command From a command line, he issues the following command: teamc workarea -integrate 310 -release robot_control Result TeamConnection first determines that Alex’s changes were built against the latestversion of the release. Then TeamConnection makes Alex’s changes visible at therelease level so t...

From the GUI, he: 1. Selects Defects → Verify from the Actions pull-down menu on the Tasks window. The Verify Defects window appears. 2. Types 310 in the Defects field. 3. Selects OK. Command From a command line, he issues the following command: teamc defect -verify 310 -release robot_control Result...

The following tasks are required: For information about this task, Go to this page. Refreshing the work area from the driver 71 Integrating the work area 72 Resolving differences 73 Refreshing the work area from the driver If Alex and Jenny are working on optics.c at the same time, they must resolve...

From a command line, she issues the following command: teamc workarea -refresh 415 -release robot_control Result This command refreshes her work area with the latest view of the release. Her workarea now contains the following part versions: brain.c (Jenny's modification 3) brain.obj (Jenny's modifi...

Command From a command line, she issues the following command: teamc workarea -integrate 415 -release robot_control Result Because Jenny is up-to-date with the latest view of the driver, her changes areintegrated after TeamConnection preserves a copy of the previous version of therelease. Reconcilin...

Alex can use either the GUI or the command line to reconcile the differences. Foursteps are required from the command line: 1. Check out the latest uncommitted version. 2. Extract the latest committed version. 3. Run the merge program against the two parts. 4. Check in the resultant part. However, o...

Command From a command line, he does the following steps: v Issues a report command to determine which parts are in conflict: teamc report -view collisionView -workarea 310 This report tells him that optics.c is the part that collided and gives the alternate version ID of the part that caused the co...

Chapter 6. Working with component and release processes The previous chapter described how to work with parts when the release does notfollow a tracking process. This chapter describes how to work with parts when atracking process is followed and how to use component processes for features and defec...

Changing defect ownership Because Carol is the component owner, she is currently defined as the owner of defect456. But the problem is in Alex’s code, so she wants him to own the defect. To reassignownership, she does one of the following: GUI From the GUI, she: 1. Selects Defects → Modify → Owner f...

Command From a command line, he issues the following command: teamc defect -accept 456 -answer program_defect Results Defect 456 moves to working state, and TeamConnection creates a work area called456. The work area is associated with the release specified on the sizing record, whichin this example...

Command From a command line, he issues the following command: teamc part -checkout optics.c -release robot_control -workarea 456 -relative d:\robot\src Results A copy of the part optics.c is checked out from TeamConnection and placed in thedirectory d:\robot\src. If the directory name is not specifi...

Note: Alex follows these steps because he knows the exact name of the part that he is checking in. If he does not know the name, or if he is checking in many parts, hecan instead do one of the following to display a list of parts: v Select the entry on his Tasks window that displays the list of part...

Note, however, that a freeze action does not make the changes visible to the otherpeople working in the release. This does not occur until the work area is integrated. Building the application Alex now builds the application to verify that the changes he has made have fixed theproblem. He does one o...

Alex builds the application and tests the results. The modification seems to solve theproblem. Note: For a detailed build example, see “Chapter 15. Building an application: an example” on page 181. Accepting fix records Alex is satisfied that the changes are complete and the part is ready to be inte...

Integrating changed parts into a release The changes that Alex has made are now ready to be put into the next set of changesscheduled to be integrated with the release. This set of changes is known as a driver . A driver named 0105 currently exists, and several driver members have already beenadded ...

Work area 456 is in the fix state. After the fix record is reactivated, Alex will check outoptics.c from this work area to reconcile the differences. Reactivating the fix record Currently, the fix record for work area 456 is in the complete state. Alex must reactivatethe fix record to move it back t...

From the GUI, he: 1. Selects Work areas → Refresh from the Actions pull-down menu on the Tasks window. 2. Types the following in the Refresh Work Areas window and selects OK: v 456 in the Work areas field v robot_control in the Releases field v 0105 in the Source field Command From a command line, h...

2. Types 0105 in the Drivers field and robot_control in the Release field. 3. Selects OK. Command From a command line, she issues the following command: teamc driver -refresh 0105 -release robot_control Results This command refreshes driver 0105 with any committed updates to the release. Building th...

Command From a command line, she issues the following command: teamc part -build brain.exe -release robot_control -workarea 0105 -pool normal Results Carol runs some simple regression tests to verify that the application built properly. Sheis satisfied with the results, and is ready for the next ste...

Command From a command line, she issues the following command: teamc driver -restrict 0105 -release robot_control Results This command restricts driver 0105 so that only Carol is able to make changes to it.Carol is now ready to build the application. Integrating the parts Carol commits the changes i...

From a command line, she issues the following command: teamc driver -commit 0105 -release robot_control Results TeamConnection moves the part versions associated with driver 0105 into the release.Other members of the team can now view the changes. Committing a driver commits allwork areas designated...

Testing the built application Annmarie is the tester for the MVS version of the robot application. When she receivesnotification that the test record is in the ready state, she tests the part changes thatwere made within the release by Alex and several of his team members. The testscomplete successf...

Chapter 7. Introduction to TeamConnection Integrated NotesDatabases The VisualAge TeamConnection Integrated Notes Database feature provides adocumentation facility to support software development. A software development groupcan use this database to communicate with TeamConnection objects from withi...

Prerequisites and dependencies In preparation for setting up and administering the Lotus Notes Integration feature,ensure that the machine you are using to implement this feature (generically, the Notes server ) is equipped as follows: v To use this function, the client machine requires Lotus Notes ...

The About document provides graphical previews for the Requirements, Development, and Test database types. These previews provide a graphical depiction of availabledocuments and the document hierarchy for each database, along with the default setupvalues available to an administrator. The Using docu...

the design. Documents existing in Notes can be associated with existingfeatures and defects in TeamConnection. Test Case Management and Tracking The Test Case Management and Tracking database assists with test casemanagement and tracking. In this database, test case definitions and theirexecution re...

Table 1. Integrated database forms by database type (continued) Form Use for this form Response to Response Document your response to another’s response to a requirements, design, test case, or basic document. Requirements Requirement Document and open a requirements document in the database. TeamCo...

specific document title. By using buttons on the action bar, you can choose to view thechildren documents of a parent document or category, all active features, or all activedefects. Views are available through the Navigator and the View menu. Table 2 provides a listing of all views currently availa...

Table 2. Integrated database views (continued) View Documents accessed (purpose) Execution Records To list all of the execution records in the database. Hierarchy To list test case, execution records, and defects in a hierarchy. My Execution Records To list all of the execution records that you have...

Chapter 8. Creating and Maintaining Integrated Notes Databases This section and the one that follows (“Chapter 9. Database Design Strategies andAdvanced Customization” on page 121) provide instructions for the members of yourorganization, referred to as the Lotus Notes Database Administrator , or ad...

The flow presented in the figure applies to all potential user databases availablethrough the Notes Integrated Database feature. Initializing the original template and creating a database To help you with developing Notes applications, a database master template is includedon the IBM VisualAge TeamC...

Note Setup is a staging process that may require some planning. See“Chapter 9. Database Design Strategies and Advanced Customization” onpage 121 for details on setup strategies and customization options. You will need to decide what type of database you need: Requirements, Designand Development, Tes...

You should also add any users involved in the testing process to the access listfor this database. The default Access of Author is recommended. i. When the database is working to your satisfaction (you can go back to the setup several times to make changes and refine it), you are ready to make it av...

Creating customized production databases Now that you have initialized the Integrated Notes Database feature and performed apreliminary setup of the database template for your organization, you can proceed tocustomize the initialized database. See “Using the Customization setup facility” on page 122...

Performing reconciliation The Reconciliation facility synchronizes the data in the TeamConnection family and theNotes databases that use it. The reconciliation facility is an agent that should be runregularly. As a default, reconciliation is activated during Setup. It can be run on anestablished sch...

Database maintenance: refreshing design from a template In the course of using Notes Integrated databases, you may have occasion to refreshcurrent databases with a template. As you receive code updates from IBM VisualAgeTeamConnection Enterprise Server, it is likely that you will want your current d...

Chapter 9. Database Design Strategies and Advanced Customization This section include some general strategies for setting up, testing, and tuning yourNotes Integrated Database implementation. The primary administrative functions aredescribed in “Chapter 8. Creating and Maintaining Integrated Notes D...

3. Assess and implement any access control/authorization schemes necessary at this level of implementation. 4. Open the newly initialized database. 5. Create test documents for testing. 6. Open features and defects if your database addresses these elements. 7. Determine whether existing (TeamConnect...

The Customization setup facility addresses the following areas of databasemanipulation: v Notes Database Customization v Modify TeamConnection Access v Reconciliation of Notes and TeamConnection Data In order to perform the Customization setup, you must set your role to Administrator inthe Access Co...

response documents for the base documents you defined in the Modify whichdocuments your project will use section. This level of customization allowsyou to control how response documents can build upon a base document andother response documents. Modify the states for documents In the Modify the stat...

Activate Reconcile The Notes Integrated Database feature provides a reconciliation facility thatsynchronizes the data in the TeamConnection family and the Notes databasesthat use it. The reconciliation facility is an agent that should be run regularly.The reconciliation facility can be run on an est...

Part 4. Using TeamConnection to build applications Chapter 10. Basic build concepts . . . . . . . . . . . . . . . . 129 The physical structure of the build function . . . . . . . . . . . . . . 129 The build object model . . . . . . . . . . . . . . . . . . . . . 130 Parent-child relationships in a bu...

Chapter 10. Basic build concepts This chapter defines terms and briefly describes the TeamConnection pieces that worktogether in building an application. For more details, continue to the other chapters inthis section. The TeamConnection build function has numerous features: v It builds applications...

Build servers are started by a TeamConnection administrator. For more information, see“Chapter 11. Installing, starting, and stopping build servers” on page 137. The build object model Figure 44 on page 133 shows the TeamConnection objects and events that constitutethe build function, as illustrated...

Build script An object that a builder uses in transforming inputs to outputs; it is essentiallya binding between TeamConnection and a transformation tool, such as a linkeror compiler. In OS/2, Windows, UNIX, or MVS/OE environments, a build scriptis usually a command file, but it can be a string that...

Though parent-child relationships usually imply that the parent part generates the childpart, in a TeamConnection build it is the opposite. Because TeamConnection places thebuild output at the top of the tree, it refers to the build output as the parent and to thebuild input as the child. To underst...

Working with a build tree Software developers must provide the information by which TeamConnectiondetermines the build events that make up a build request. An application’s build treeshows this information graphically. Figure 44. Sample build object model for msgcat.exe Chapter 10. Basic build conce...

Putting the pieces together The table that follows lists the tasks involved in preparing for building an application andin actually building it. Usually an administrator does the preparation steps, but anyonewith the proper authority can do so. For more information about this task, Go to this page. ...

Chapter 11. Installing, starting, and stopping build servers This chapter explains how to install, start, and stop a build server. Installing the build function Before installing build servers, you should be familiar with the build concepts found in“Chapter 10. Basic build concepts” on page 129. For...

The following are software requirements for the MVS build server: v TCP/IP Version 3.2 for MVS v OS/390 R3 LE To install the build server on MVS, you create MVS data sets and then upload theTeamConnection files to these data sets. Follow these steps: 1. On your TeamConnection server, install the MVS...

Note: The file fhbmsg.mvs is installed in the language subdirectory of the \nls\msg directory path in the TeamConnection installation directory, forexample, \nls\msg\en_us for US English. The remaining MVS files areinstalled in the \mvs subdirectory. c. This optional step installs the sample build s...

2. From the oe subdirectory where TeamConnection is installed, use ftp to upload the following files to MVS/OE, in binary. v rename teamcbld.oe to teamcbld (main executable) v rename fhccmnc.oe to fhccmnc (supporting DLL) v rename fhcrscli.oe to fhcrscli (supporting DLL) v teamcv3.cat (for required ...

v -s sends log file messages to the screen.The build server generates a log file calledteamcbld.log. Build server log messages can be routed to the screen using the -sparameter. v -n writes files: – writes the changed environment variables to a file called tcbldenv.lst instead of setting them in pro...

– TC_BUILDMINWAIT - Minimum amount of time to wait (in seconds) between queries for new jobs. Default setting is 5, minimum setting is 3. – TC_BUILDMAXWAIT - Maximum amount of time to wait (in seconds) between queries for new jobs. Default setting is 15, maximum setting is 300. The teamcbld will che...

v unit_name indicates the default unit type for dynamic data set allocations. VIO is the default. v login_password is required only when the family server authentication level requires a TeamConnection user password. v local_codepage indicates the code set that text data is converted to for the buil...

You can store the build startup files wherever you like, provided that you give the fullfile path names for them in the -b parameters, or in the TC_BUILD_RSSBUILDS_FILEenvironment variable. Stopping the build servers To stop a build server, do one of the following: v Close the window in which the bu...

Chapter 12. Working with build scripts and builders A builder is an object that can transform one set of TeamConnection parts into anotherby invoking tools such as compilers and linkers. For example, one builder mighttransform a COBOL source file into an object file. Another might transform a set of...

To create a builder using the command line: From a command line, type the teamc builder -create command and press Enter. The complete command syntax is the following: teamc builder -create name -condition RC_expression -environment name -from script_filespec -script name -value RC_value -release nam...

To use the builder from a previous release, you can link to a part that uses it inthat release. This action copies the builder to the new release. Otherwise, youmust create the builder again in the new release. Script, File type, and Source file These fields work together to define the build script ...

starting, and stopping build servers” on page 137 for more information.) It isrecommended that you follow a naming convention for this attribute, usingvalues such as os2 and mvs . Comparison operator and RC value Together, these two attributes make up a Boolean expression that defines thecriteria us...

Passing parameters to a build script There are three places where parameters can be specified that affect the outcome of abuild. As attributes of a builder Builder parameters are passed to the build script, after variable substitution isperformed. Variables are substituted based upon the following s...

Writing a simple build script This kind of build script is written into the Script attribute of the builder. When youcreate or modify the builder, you specify in this attribute the name of the transformationtool to be invoked. For example, suppose you want to create a builder that compiles a C sourc...

debug = VALUE('DEBUG',,environ) if debug = 'YES' then do parms = parms || '/Ti+' end icc parms '/Fo'||output input exit result Windows NT and 95 build scripts must be able to return a value for a return code. Because *.bat command files provide little support for programming logic and cannot return ...

DEBUG parameters, and then runs the command file against a local copy of hello.c. Ifthe test is successful, the script correctly builds hello.obj in the current directory, andDEBUG is interpreted correctly. Modifying the contents of a build script Sometimes you need to modify the contents of a build...

v From a command line, type the following and press Enter. teamc part -modify name -Builder name where the part name is the name of the output file to be created by this builder and the builder name is the name of the builder itself. The complete syntax for this command is described in the TeamConne...

v From a command line, type the following: teamc part -modify name -builder null -release name -family name Working with VisualAge C ++ and Templates When using VisualAge C ++ and templates, template-include objects are saved in a subdirectory of the current directory called TEMPINC, so that subsequ...

Chapter 13. Working with MVS build scripts and builders A builder is an object that can transform one set of TeamConnection parts into anotherby invoking tools such as compilers and linkers. For example, one builder mighttransform a COBOL source file into an object file. Another might transform a se...

To create a builder using the command line: From an OS/2 command line, type the builder -create command and press Enter.The complete command syntax is the following: teamc builder -create name -condition RC_expression -environment name -from script_filespec -script name -value RC_value -release name...

To use the builder from a previous release, you can link to a part that uses it inthe previous release. This action copies the builder to the new release.Otherwise, you must create it again in the new release. Script, File type, and Source file These fields work together to define the build script t...

See “Synchronizing the build of unrelated parts” on page 196 for an example. Environment This is the name of the environment supported by the builder, such as MVS. The value that you specify here can be anything you like, but it must exactlymatch the environment value specified in the command used t...

handling the timing of MVS builds is to start the MVS build server only at nightand ensure that the MVS builders do not have short timeout values. Writing an MVS build script The best starting point for an MVS build script is an existing JCL fragment that is usedfor transforming inputs into outputs....

File name conversions for MVS TeamConnection file names are modified by the MVS build server according to thefollowing rules: v The directory path of a file name is not used. All characters of a file name up to andincluding the rightmost slash (/ or \) are thrown away. v Lowercase characters are con...

&TCBLDUSR On MVS, can be used in JCL scripts, which will be substituted with the userIDbefore processing the script. &TCINPUT This variable is used for in-stream data. For each build input, the line where&TCINPUT appears is duplicated and the variable &TCINPUT substituted withthe inp...

– Selecting Part → View → View build message from the Actions pull-down menu on the Tasks window Note: More than one ddname can specify TCOUT ; the results are concatenated in the order of appearance. When you add the TCEXT attribute for a ddname specification, you must also specifyother attributes ...

v PARM='information' , where information is the parameter string passed to the load module. v COND=( code,operator [ ,stepname] ) – code is the value to test against the return code from a previous step – operator is the comparison to be made between the value for code and the return code – stepname...

This will always be allocated as a DUMMY DSN. All other keyword parameters are ignored and not used. Example of a build script for a C compile The following JCL can be submitted as a batch job to do the following: v Compile the source file member in the data set WELLSK.TEAMC.C v Produce an object fi...

Example of a build script for a COBOL compile TeamConnection provides a sample build script program for compiling MVS COBOLprograms. This sample is called fhbcobm.jcl. It invokes a JCL procedure called IGYWC,which needs to be in the system PROCLIB concatenation or in the data set identified bythe TE...

//*------------------------------------------------------ //* PROGRAM: cobolcmp.jcl //* IBM COBOL for MVS //* Compile Only //* //*------------------------------------------------------ //COBOLCMP EXEC PGM=IGYCRCTL,PARM='&TCPARM' //* //* INPUT FILES WITH EXTENSION CBL //* //SYSIN DD TCEXT=CBL,DIS...

This syntax is a subset of the linkage editor INCLUDE card. If the card is an INCLUDE ddname(MEMBER) control statement, the object code iscopied into a sequential data set associated with the SYSMOD ddname. Otherwise, thecontrol card is embedded in the data set associated with the SYSMOD ddname. Thi...

Chapter 14. Working with parsers This chapter describes how to create a parser. It assumes that you have read“Chapter 10. Basic build concepts” on page 129. Consider the task of defining and maintaining a build tree. One of the moretime-consuming, and error-prone, portions of this task is defining t...

v A dependency in which the file is stored in the TeamConnection database.For example, hello.c includes hello.h, and both files are stored in theTeamConnection database. During a build, these dependencies must beextracted to a path accessible by the build server. Because a build extractsparts from T...

3. Writes out the list of such files into the dependency list file For example, for a C source file, the program could report a list of all the files includedby the source file (using #include statements). For a COBOL program, COPY statements would be the cue. TeamConnection ships a sample of a comm...

After you attach a parser to a part, it is ready for action. The next time the part ischecked in, when a part is created, or when the parser is attached, the parser willinvoke its command file, which will report back a list of dependencies. Using a parser does not keep you from defining dependencies...

Chapter 15. Building an application: an example This chapter uses an extended example to describe in more detail how each of thecomponents of the build function work together. All commands used in this example aredescribed in detail elsewhere in this publication. This example walks through the contr...

Starting the build servers The software development team in our example is building large applications using afamily named testfam, so they set TC_FAMILY to testfam . They plan to spread the work across several build servers, taking advantage of TeamConnection’s ability toperform multiple build even...

mvspool For MVS builds pool1 For normal OS/2 builds pool2 For fast, high-priority OS/2 builds Each pool is formed as Mark starts build servers and assigns them to it. He starts thefollowing build server (bldserv2): teamcbld -b bldserv2 -p pool1 -e os2 The parameters specify the following: -p The bui...

2. Creates two place-holder parts for the output of compiling the .c files. These parts are the output of the compile step; c_compiler, the builder that manages that step, isattached to both of them. He indicates that they are input to their parent file,msgcat.exe. Using the GUI, he can create these...

teamc part -create hello.obj bye.obj -builder c_compiler -binary -empty -release 9503 -workarea 223 -component comp1 -parent msgcat.exe -input teamc part -create hello.h bye.h -release 9503 -workarea 223 3. Attaches the parser c_parser to the .c files. Using the GUI, he can attach the parser to thes...

Using the command-line interface, he can connect these parts by issuing thefollowing commands: teamc part -connect hello.c -parent hello.obj -input -release 9503 -workarea 223 teamc part -connect bye.c -parent bye.obj -input -release 9503 -workarea 223 The .h parts are not connected because he expec...

Starting the build on the client After much hard work on his source code, Greg is ready to start building his application. Using the GUI, he can start the build by selecting build from the Actions → Parts menu of the Tasks window, and completing the fields as shown in the followingillustration: Figu...

Unconditional Builds only parts that are out-of-date but continues processing even iferrors are returned. Note that outputs are not rebuilt for inputs thathave failed. Report Gives a preview of what would be built if you invoked a build. The report identifies what steps would occur without any trans...

Finding out which parts will be built Before running a build of a large application, you might want to find out exactly whichparts will be built. If you specify that you want to run in report mode, TeamConnection determines what will be built in a normal build and produces a report showing theresult...

This command will stop all queued and in_progress builds. Any build events alreadyperformed for that build are not undone. For example, if Greg cancels the build of msgcat.exe when the compile steps havebeen completed, then the link step is not performed. However, the newly compiledhello.obj and bye...

teamc part -build robot.dll -workarea 915 -release 9503 The output of this build would be both robot.dll and robot.map. Any parametersspecified in the teamc part -build robot.dll command would also apply to the build of robot.map. Synchronizing the build of unrelated parts An entire application can ...

Part 5. Using TeamConnection to package products Chapter 16. Using TeamConnection to package a product . . . . . . . . 201 Setting up your build tree for packaging . . . . . . . . . . . . . . . 202 Setting up a build tree for the gather tool . . . . . . . . . . . . . . 202 Chapter 17. Using the Gath...

Chapter 16. Using TeamConnection to package a product After you have built an application to your satisfaction, it is time to distribute it to users.This chapter describes how you can use TeamConnection to help automate thepackaging and distribution steps. TeamConnection provides the following: v Tw...

Setting up your build tree for packaging When TeamConnection builds an application, the application’s build tree identifies theparts to be built and the tools to use in building it. Similarly, when you useTeamConnection for packaging the application, the build tree can define the parts to bepackaged...

Chapter 17. Using the Gather tool The Gather tool automates the movement of software and data from one directory toanother on the same machine to prepare a package for electronic distribution. It cancopy or erase files; it can create or delete directories. This tool takes a list of input files and m...

teamcpak [-i] [-o "String"] gather Input_file... Where -i Specifies that only one Input_file is specified in the command: an include file containing the list of input files. This parameter is optional. If you specify -i , it must precede the gather flag. -o " String" Specifies that t...

(DATA (PACKAGEFORMAT gather) (TARGETROOT Filename) (RULE (SOURCE Filename...) (TARGET Path) [(EXITPRIOR String... | EXITREPLACE String... | EXITPOST String...)] ) ) . . [(EXITPRIOR String...)] [(EXITPOST String...)] ) Keywords for a Gather package file DATA This keyword is required. It must be the f...

(DATA (TARGETROOT f:\demoapp ) . . (RULE (SOURCE *.bin *.dll ) (TARGET bin\files ) ) (RULE (SOURCE *.hlp ) (TARGET targetroot ) ) . . ) EXITPRIOR, EXITPOST, and EXITREPLACE String... These keywords are optional. They specify a user exit program to run as partof the gather operation. To specify an ex...

v The resolved SOURCE file specifications v The resolved TARGET specification The exit keyword accepts any executable file or command. The exit program mustreturn an integer return value, zero meaning successful; it must also accept or ignorethe additional Gather parameters added to the end of the i...

Chapter 18. Using the Tivoli Software Distribution packaging tool The Tivoli Software Distribution packaging tool supports automated distribution betweena single Tivoli Software Distribution server and its TCP/IP-connected clients. The TivoliSoftware Distribution tool works either by itself or in co...

-o "string" Specifies that the string listed in quotes be passed to the Tivoli SoftwareDistribution tool. For a list of possible flags to be passed, see “Command lineflags”. inputFile Specifies the files to be copied and the name of the package specification file.You can specify this paramet...

Example of the teamcpak softdist command The following is an example of the teamcpak softdist command. teamcpak -i -o "-a -n -t" softdist Client.lst The -i parameter specifies that the input file Client.lst is to be used. The -o parameterpasses the following options to Tivoli Software Distri...

[(LOGNODE ManagedNode)] [(LOGFILE directory)] ) ) Keywords for a Tivoli Software Distribution package file DATA This keyword is required. It must be the first keyword in the package file, and itcan be specified only once. All other keywords are nested within the DATA clause. Example: (DATA . . other...

(DATA . . (MANAGER Distrib1) . . NODES This keyword specifies the nodes to which the files are to be distributed. Thesemust already have been defined to the profile manager as subscriberManagedNodes or PCManagedNodes. To distribute files to non-subscribers,you need to use Tivoli Software Distributio...

Log file Check the file name you specified in the LOGFILE keyword for errormessages. Mail Check Tivoli mail messages generated during the distribution. -k option Run the teamcpak command with the -k option to keep the package file afterthe distribution has been run. This allows you to reprocess a di...

Appendix A. Environment Variables You can set environment variables to describe the TeamConnection environment inwhich you are working. You are not required to set your TC_FAMILY environmentvariable for the TeamConnection client command line interface. However, if theTC_FAMILY environment variable i...

Table 4. TeamConnection dynamically set build environment variables (continued) Environment variable Purpose Flag Setting Used by TC_LOCATION Directory where build script is invoked. Build server (except MVS build server) Setting environment variables For methods of setting your environment variable...

Appendix B. Importing makefile information into TeamConnection TeamConnection provides a command to help you import makefile information into theTeamConnection database. The fhomigmk command reads a makefile and creates theparts in it. Build tree connections are created based on a rules file. The co...

found, TeamConnection uses default rules. “Creating a rules file” on page 237 explains the rules, the format of this file, and the default rules. /x Specifies that you want to run the command file that was produced by the /c parameter. /s Specifies that the build tree is to be displayed after the co...

used in the commands is mywork . After the commands are issued, the resulting build tree is shown using the TeamConnection GUI. Creating a rules file The import rules file is a text file that describes how you want TeamConnection tocreate and connect parts. In this file you supply a set of rules, on...

v * indicates to use the name in the makefile, relative to the current workingdirectory. For example, if a makefile specifies a file src\abc.cbl and the makefile specifiesf:\mysrc\, the content is expected in f:\mysrc\src\abc.cbl. For a file of *.cbl, thecontent is expected in src\abc.cbl relative t...

Appendix C. TeamConnection Merge The TeamConnection VisualMerge provides a way for you to merge two or threeselected files together to make one single file. You can select options for viewingdifferences and collisions, as well as view the composite output of the merged files.Both a command line ( tc...

Appendix D. Enabling an OS/2 Workframe project forTeamConnection TeamConnection lets you create a Workframe version 3 project that hasTeamConnection options as well as a set of TeamConnection actions. For each project,you specify on the Project Options window the values for these options. By doing t...

View part information Displays an unprimed View Part Information window. Edit part Displays an unprimed Edit Part window. Show parts If the project attribute Show filter is not set, issues a query based on theproject attribute’s query mask. If the project attribute Show filter is set,displays the Pa...

Using your project: a simple scenario Suppose you are working on a defect in the family FAMILY1, release REL1_1. Youhave created a TeamConnection work area called SANDBOX to work in. You want touse the Workframe to access your TeamConnection parts. Here is what you might do. 1. Create a TeamConnecti...

Appendix E. Enabling a Workframe/NT project for TeamConnection TeamConnection lets you create a Workframe/NT project that has TeamConnectionoptions as well as a set of TeamConnection actions. Workframe/NT doesn’t use the TeamConnection dialogues. Instead, WorkFrame/NTuses monitored commands to invok...

Appendix F. Enabling and Using the ENVY/Manager-TeamConnection Bridge Overview of the ENVY/Manager-TeamConnection Bridge ENVY provides a repository with operational support tailored specifically forhighly-interactive, prototyping environments that emphasize iterative development, suchas VisualAge Sm...

Scope of this documentation This documentation is intended for users and administrators installing and using thebridge. It is assumed that you familiar with both the VisualAge Smalltalk andTeamConnection products. The following subsections describe the mechanics of enabling the ENVY/Manager-TeamConn...

How the bridge communicates with TeamConnection The bridge functions are initiated from within the VisualAge Smalltalk environment.Each operation that interacts with TeamConnection runs for some time in the Smalltalkimage, but at some stage will make use of functions built into an appropriate versio...

These configuration maps should be imported into your development library so that itcan be loaded by all of the users sharing that library. The step-by step instructions aredescribed in “Installing and activating the ENVY/Manager-TeamConnection Bridge” onpage 253 . Usually, the Library Supervisor or...

v TC_COMPONENT is used as the default TeamConnection component for partsstored in TeamConnection through the bridge. If TC_COMPONENT is not defined oris empty, the value root is used. v TC_RELATIVE is used to specify the initial destination path for files retrieved fromTeamConnection through the bri...

developers” on page 261, you must also import the configuration map called VAGenENVY/TC Bridge, as described in the previous steps. 8. Select the OK pushbutton to initiate the import process. During the process of importing the TCEMBR.DAT file into the VisualAge Smalltalk Pro manager.dat file,the Sy...

Using the ENVY/Manager-TeamConnection Bridge You can perform TeamConnection functions on ENVY components, provided that yousupply parameters necessary to identify a bridge configuration . Bridge configuration parameters are defined by the Default Properties notebook, as described in “Settingdefault ...

Context page The context page is used to specify the TeamConnection family, release, and work areaused as the context for the default bridge configuration. Family Use this field to input the name of your TeamConnection family server. Select the Test Server pushbutton to return an information window ...

cache services (TCCS) on how to manage the locking behavior for parts thatyou are exporting to or importing from the TeamConnection repository. Obtain and release Also known as optimistic locking, TCCS will attempt to check out the part(s) before checking in changes that you have made in the ENVYenv...

Replace existing files Files that currently exist in the target directory are automaticallyoverwritten. Export page The Export page provides default settings options for exporting ENVY components orfiles to a TeamConnection database. Storage in TeamConnection The Component field identifies the TeamC...

mismatches. If you make a change to an application, it is important to update all theexported configuration maps that contain the application and to export all of theconfiguration maps again. Note: The Export all required maps too checkbox located on the Export page of the Default Properties noteboo...

1. Select Configuration Maps, Applications, or Files from the Import cascade menu. 2. If the Show this dialog when exporting and importing option has been set in the default bridge configuration, you will be presented with the Import Propertiesnotebook, which is primed by values in the Default Prope...

BOM file for each application contains an entry (at least the name,edition/timestamp, and TCPart type) for each class and method in eachapplication. Object mapping in TeamConnection After a ENVY/Manager-TeamConnection Bridge export action, the following parts arecreated in TeamConnection in wa1 for ...

Refer to the VisualAge Generator Generator’s Guide for more details on the OVR part. 2. In TeamConnection (build function): a. The build administrator selects the EZEPREP collector of the initial build tree of a program proxy in wa1 for f1 , and requests a build. b. TeamConnection places the generat...

f. If there are tables and/or map groups used by the program, the generator determines whether there is already a build tree for them. If not, initial build treesare added for them using the program’s OVR part. g. TeamConnection re-examines the build tree of the EZEPREP collector and determines that...

Appendix G. Source Code Control User’s Guide Differences between other source code control providers and TeamConnection The purpose of this document is to help Visual Basic, Visual C++, and PowerBuilderusers, make TeamConnection their Visual environments source code control provider.This document as...

Components are used to organize the data in a family. Components are arranged in ahierarchical tree structure, with a single top component called root. The componentowns the parts that may be in it, and controls access to the parts. Once you are givenaccess to a component, you have access to all the...

Note: If you have not already done so, follow the directions and install the TeamConnection client for your workstation. The following directions assume thatyou have successfully installed the TeamConnection client. Connecting TeamConnection to an IDE In order for TeamConnection to be your source co...

– Port Address v Component v Release v WorkArea You also need to know the project name. The project name is used by yourdevelopment tool to relate to the TeamConnection attributes of family, release, workarea, and component by the Source Code Control DLL. Opening a project One of the few differences...

Check-in The steps to check-in a file vary by the development environment. In most casespressing mouse button 2 when the mouse pointer is over a file icon of a file checkedout to you, brings up a menu that includes the file check-in option. Selecting the filecheckin option opens the Check-In window....

designate TeamConnection as the Source Code Control provider. From theTeamConnection GUI you can create new work areas (if you have the correct authority),retrieve previous versions of a part, open or process defects, and perform many otheractions against parts. Migrating project data bases One key ...

Starting a new project Starting a new project in Microsoft Visual Basic, Visual C++, or PowerBuilder isessentially the same regardless of the source code provider. The only operationaldifference is that the TeamConnection Source Code Control Settings window opensat some point. When the TeamConnectio...

7. To place the files under source code control, select the Add to Source Code Control option of the Tools menu. Starting PowerBuilder: To create a new project under PowerBuilder, do the following: 1. Start PowerBuilder. 2. Select the Library icon. Note: If TeamConnection Source Code Control is alre...

Appendix H. Supported expandable keywords TeamConnection supports expandable keywords in text files. When a file containingexpandable keywords is extracted from TeamConnection, the current value of eachkeyword is added to the file. This information can help you identify what version ofsource code is...

keyword to appear in the output, add a minus sign (-) after the dollar sign ($). Forexample, if the statement is prepared as follows: static char _filex_hdr[]="$−KW; $−FN; $−Ver; $−ChkD; $−EKW;"; Then the expanded keywords will look like: static char _filex_hdr[]="$@(#) bin/filex.hdr 1:1...

Appendix J. Sample REXX execs, build scripts, and parsers This appendix is composed of the IBM-supplied REXX execs, build scripts, and parsers.Your family administrator can modify these samples to fit the needs of yourorganization. The samples in this appendix may not be available on all platforms. ...

Sample build scripts fhbcob2.cmd Calls the COBOL Visual Set for OS/2 compiler. fhbcob2l.cmd Calls the COBOL Visual Set for OS/2 compiler and link editor. fhbocomp.cmd Calls the VisualAge for C ++ icc compiler. fhbolib.cmd Calls the OS/2 implib utility. fhbolin2.cmd Calls the VisualAge for C ++ icc l...

Customer support Your options for IBM VisualAge TeamConnection Enterprise Server support, asdescribed in your License Information and Licensed Program Specifications, includeelectronic forums. You can use the electronic forums to access IBM VisualAgeTeamConnection Enterprise Server technical informa...

DB2 service maintenance and technical library To download the latest service maintenance for DB2, use the DB2 Service and Supporton the World Wide Web at: v http://www.software.ibm.com/data/db2/db2tech Note: Even though DB2 is bundled with VisualAge TeamConnection you should contact VisualAge TeamCo...

Bibliography IBM VisualAge TeamConnection Enterprise Server library The following is a list of the TeamConnection publications. For a list of otherpublications about TeamConnection, including white papers, technical reports, a productfact sheet, and the product announcement letter, refer to the IBM ...

TeamConnection technical reports The following is a list of technical reports available for TeamConnection. Refer to theIBM VisualAge TeamConnection Enterprise Server Library home page for the mostup-to-date list of technical reports. 29.2147 SCLM Guide to TeamConnection Terminology 29.2196 Using RE...

Describes how to monitor DB2 database activity and analyze system performance. v Glossary A comprehensive glossary of DB2 terms. Related publications v Transmission Control Protocol/Internet Protocol (TCP/IP) – TCP/IP 2.0 for OS/2: Installation and Administration (SC31-6075) – TCP/IP for MVS Plannin...

Glossary This glossary includes terms and definitions fromthe IBM Dictionary of Computing , 10th edition (New York: McGraw-Hill, 1993). If you do not findthe term you are looking for, refer to thisdocument’s index or to the IBM Dictionary of Computing . This glossary uses the following cross-referen...

defect. A TeamConnection object used toformally report a problem. The user who opens adefect is the defect originator. delete. If you delete a development object, suchas a part or a user ID, any reference to that objectis removed from TeamConnection. Certain objectscan be deleted only if certain cri...

automatically granted through inheritance or objectownership. Contrast with base authority and explicit authority . import. To bring in data. In TeamConnection, tobring selected items into a field from a matchingTeamConnection object window. inheritance. The passing of configurationmanagement proper...

Index Special Characters /Ft(dir) builder parameter 157 A Accept Defects window 52 Accept Test Records 96 Activate Fix Records 90 Add Driver Members 88 approval command approving a fix 82 Approval Records window 81 approve state 45 authority basic 26 build 177 for checking in parts 34 for checking o...

Readers’ Comments — We’d Like to Hear from You IBM VisualAge TeamConnection Enterprise ServerUser’s GuideVersion 3.0 Publication No. SC34-4499-03 Overall, how satisfied are you with the information in this book? Very Satisfied Satisfied Neutral Dissatisfied Very Dissatisfied Overall satisfaction h h...

Readers’ Comments — We’d Like to Hear from You SC34-4499-03 SC34-4499-03 IBMR Cut or FoldAlong Line Cut or FoldAlong Line Fold and Tape Please do not staple Fold and Tape Fold and Tape Please do not staple Fold and Tape NO POSTAGENECESSARYIF MAILED IN THEUNITED STATES BUSINESS REPLY MAIL FIRST-CLASS...