IBM QMS 4525 - Manuals

Contents iii Using the Stapler ........................................................................ 4-13 Refilling Staples ......................................................................... 4-13 Emptying Output Bins ............................................................... 4-16 5 Pr...

QMS 4525 Print System User'’s Guide iv Selecting Page Orientation ....................................................... 5-18 Using QMS DOC 5-19Using VMS Commands 5-19Three-hole-punched Paper Orientation 5-19 Number Up Printing ................................................................... 5-2...

Contents v Operational Status Messages 6-13Error Messages 6-22 Problem Checklist ...................................................................... 6-22 Apple Macintosh Checklist 6-24IBM PC Compatible Computer Checklist 6-24 Other Common Printer Problems ............................................

QMS 4525 Print System User'’s Guide vi Output Bins B-3Photoconductor B-4Charging System B-4Exposure System B-4Developing System B-5Fusing Mechanism B-5Toner B-5Cleaning System B-5Power Consumption B-5 Physical Specifications ............................................................... B-6 Weight ...

Contents vii Glossary Index ™ EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

About This Manual QMS 4525 Print System User’'s Guide 1-2 About This Manual This manual provides infor mation on how to operate and maintain your QMS 4525 Print System. Use the following summary, the table of contents, and the index to locate the information you need. Contents „ Chapter 1 — Introduc...

About This Manual QMS 4525 Print System User’'s Guide 1-4 Typographic Conventions The following typographic conventions are used throughout this man-ual: • 1RWH1RWHVFRQWDLQWLSVH[WUDLQIRUPDWLRQRULPSRUWDQWLQIRUPDWLRQWKDW GHVHUYHVHPSKDVLVRUUHLWHUDWLRQ 2 &DXWLRQ &DXWLRQVSUHVHQWLQIRUPDWLRQWKDW\RX...

About the Documentation 1-5 Introduction About the Documentation This section describes the documentation that you received with your printer. „ QMS 4525 Print System User's Guide You’re now looking at your detailed guide for information about the printer, how to load paper and refill the toner, how...

2 About the Printer In This Chapter . . . „ Printer features „ Controlling and configuring the printer „ QMS Document Option Commands „ Crown Multitasking EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Printer Features 2-3 About the Printer Printer Features The following are the major features of your printer. PostScript Level 1 and Level 2 Compatibility The QMS 4525 printer provides PostScript Level 1 and Level 2 page description capabilities via QMS-developed emulations that are com-patible with...

Printer Features QMS 4525 Print System User's Guide 2-4 The PostScript typefaces that are resident on your QMS 4525 Print System are listed on the advanced status page. See chapter 5, “Print-ing Your Files,” for information on choosing and printing the advanced status page. • 1RWH7KH3RVW6FULSWHPXODW...

Printer Features 2-7 About the Printer Lineprinter Emulation The Lineprinter emulation prints simple byte-oriented line printer files. A byte-oriented line printer handles jobs consisting of a series of bytes where lines are delimited by carriage return and line feed char-acters as opposed to a main...

Printer Features QMS 4525 Print System User's Guide 2-8 „ Supported CCITT Commands The following CCITT groups 3 and 4 commands are supported on your printer: HP-GL Emulation Your printer provides HP-GL plotter emulation (7550A, 7470A, 7475A, and ColorPro). LN03 Plus Emulation The LN03 Plus emulation...

Printer Features 2-9 About the Printer QMS Crown Technology QMS Crown is a proprietary multitasking printer operating system, which allows QMS to adapt advanced printer software to the evolving printing needs of users in many different environments. Crown includes features such as simultaneous inter...

Printer Features QMS 4525 Print System User's Guide 2-10 The side output bin and each sor ter bin holds a maximum of 100 sheets of 60 to 100 g/m 2 paper, or a maximum of 50 sheets of 100 to 120 g/m 2 paper. Output options include a 20-bin face-down sor ter with a total capacity of 2000 sheets, a 40-...

Controlling and Configuring the Printer QMS 4525 Print System User's Guide 2-12 „ Consoles Remote consoles (Telnet and DECnet) and a dedicated local con-sole (RS-232C serial) provide job status and font infor mation to any user who has the capability to send and cancel print jobs. The system adminis...

Controlling and Configuring the Printer 2-13 About the Printer When the printer is on line and idle (ready to accept a print job), this is what the control panel looks like. Control Panel Keys These are the keys that are functional when the printer is on line: Symbol Key Name Function Continue Conti...

Controlling and Configuring the Printer QMS 4525 Print System User's Guide 2-18 Changing Configuration Settings Once the printer is off line, you can enter the Configuration menu by pressing the Back key. The Configuration menu displays as two fields of text. The first field is the current menu, and...

Controlling and Configuring the Printer 2-19 About the Printer • 1RWH7KHIROORZLQJFKDUDFWHUVDSSHDUDVEORFNVRQWKHUHPRWHFRQVROHZKHQ \RXHQWHURUFKDQJHGDWD7KHVHEORFNUHSUHVHQWHGFKDUDFWHUVDUHQRW VXSSRUWHGRQWKH4063ULQW6\VWHP 8VHWKHSUHYLRXVDQGQH[WFKDUDFWHUVWRGHWHUPLQHZKDWVSHFLILFFKDUDFWHU LVEHLQJUHSUHVHQWHGE\W...

Controlling and Configuring the Printer QMS 4525 Print System User's Guide 2-20 keyboard. If executing a console command results in more than a sin-gle screen of output, the display pauses every 24 lines and waits for you to press any key to continue. Console Modes System users and the system admini...

Controlling and Configuring the Printer 2-21 About the Printer The PS Executive Series Utilities on-line documentation gives com-plete instructions for installing and using the software. QMS Document Option Commands Your QMS 4525 printer offers a wide range of capabilities for design-ing and printin...

Controlling and Configuring the Printer QMS 4525 Print System User's Guide 2-22 Printer Function Command Booklet printing %%IncludeFeature: booklet Collate document %%IncludeFeature: collate Duplex print %%IncludeFeature: duplex Logical margins %%IncludeFeature: margins Logical page orientation %%In...

Crown Multitasking QMS 4525 Print System User's Guide 2-24 Set paper size override %%IncludeFeature: paper_size_override Wrap long lines %%IncludeFeature: autowrap PostScript Emulation Function Command Select PostScript level %%IncludeFeature: languagelevel Default dither %%IncludeFeature: defaultdi...

Crown Multitasking 2-25 About the Printer Using its Crown multitasking capability, the QMS 4525 performs these activities simultaneously rather than sequentially. This is accom-plished using advanced memory management techniques such as simultaneous interfacing, input buffering, job spooling, compil...

Crown Multitasking 2-27 About the Printer Emulation Sensing Processor (ESP) Technology Most printers can recognize only their native command language. The QMS 4525, however, has ESP (Emulation Sensing Processor) tech-nology. Using a form of ar tificial intelligence, ESP technology ana-lyzes incoming...

Crown Multitasking QMS 4525 Print System User's Guide 2-30 intermediate blocks of compressed data. Increasing the allo-cation for this client increases chunk collation size and the number of jobs that can be compiled ahead. Disk Cache ClientThe disk cache client stores frequently used data in system...

Media Sizes and Imageable Areas QMS 4525 Print System User's Guide 3-3 Media Sizes and Imageable Areas Your printer supports paper, transparencies and other types of print media in a variety of sizes. (See chapter 5, the “Manual Feed” sec-tion, for specific paper type information.) Each size has a s...

About Paper 3-4 Print Media is available from a variety of paper manufacturers. This paper is thicker, smoother, and whiter than copier paper and gives your page a more professional appearance. Textured paper may cause uneven results. Paper Weight and Type The printer accommodates 13 to 45 lb (50 to...

Automatic Paper Feed QMS 4525 Print System User's Guide 3-5 Automatic Paper Feed If you use automatic paper feed, the printer can be configured for a maximum of two paper sizes, and each paper input bin can be config-ured to accommodate one of the two paper sizes. Printer Paper Size Configuration Th...

Automatic Paper Feed 3-6 Print Media Input Bin Paper Size Configuration Each of the two paper input bins can be configured for any one of the following paper sizes: „ Letter „ Legal Small „ Legal Large „ Quarto „ A4 „ Commercial „ Foolscap „ Folio • 1RWH,QSXWELQSDSHUFRQILJXUDWLRQPXVWEHGRQHE\D4066HUY...

Automatic Paper Feed QMS 4525 Print System User's Guide 3-7 „ Drafting film „ Drafting paper „ Preprinted paper (quick-drying and heat-proof ink) „ 53 lb. (200 g/m 2 ) paper • 1RWH2QOEJP SDSHUIXVLQJLVVOLJKWO\UHGXFHG Unsupported Media Types The following media is not supported: „ Thin offset plates s...

4 Daily Operations In This Chapter . . . „ Turning the printer on/off „ Dew prevention „ Loading paper „ Refilling toner „ Adjusting paper size switch „ Using the stapler „ Refilling staples „ Emptying output bins EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Turning the Printer Off 4-3 Daily Operations Turning the Printer Off Leaving the printer turned on overnight causes unnecessary wear on the printer. You may also want to turn it off when it is not in use for several hours at a time. Use the following procedure to turn the printer off: 1 Press the Li...

Loading Paper QMS 4525 Print System User's Guide 4-4 :\RXFDQWXUQLWRIIZLWKDVZLWFKORFDWHGEHKLQGWKHOHIWIURQWGRRURI WKHSULQWHU<RXVKRXOGOHDYHLWRQKRZHYHUWRHQVXUHUHOLDEOHSHUIRUPDQFH E\WKHSULQWHU . Loading Paper The printer has two ways of telling you to load paper in one or both input bins: 1 When the p...

Refilling Toner 4-9 Daily Operations Refilling Toner When the minimum level of toner is reached, the following message displays on the control panel: TONER LOW If the Toner Low Action option in the Administration/Engine menu is set to Continue, the printer continues to print after the warning mes-sa...

Adjusting the Paper Size Switch QMS 4525 Print System User's Guide 4-12 Adjusting the Paper Size Switch If you have the stacker/stapler installed, a device in the upper output bin taps printed sheets into a neat stack. For this to work properly, the paper-size switch must be set to the correct paper...

Using the Stapler 4-13 Daily Operations Using the Stapler The system administrator sets the default stapling option in the Oper-ator Control menu to enable or disable stapling. Multiple copies of print jobs are stapled individually. Stapling requires the following: „ Staples must be loaded in the st...

Emptying Output Bins QMS 4525 Print System User's Guide 4-16 Emptying Output Bins When one of the output bins becomes full, OUTPUT BIN FULL appears in the message display. To empty either output bin If you do not retur n the bin to its operating position, UPPER TRAY OUT or LOWER TRAY OUT continues t...

Printer Job Spooling 5-3 Printing Your Files DOC commands prepended to the beginning of the next file (or the printer's default setup if no DOC commands are used) take effect. Printer Job Spooling Another powerful feature of your QMS printer is the ability to “spool” (temporarily store) jobs receive...

Feeding Paper QMS 4525 Print System User's Guide 5-4 Selecting an Input Bin Your printer has two input bins for automatic feed, and one manual feed slot. The illustration below shows the locations of the input bins and the manual feed slot. You must specify the paper that you want to use for your pr...

Feeding Paper 5-5 Printing Your Files „ Current job paperAn application, network print command, and/or QMS Document Option Command can specify the paper to be used for the current print job. In addition to selecting the default paper from the control panel, you have the following ways to select pape...

Feeding Paper QMS 4525 Print System User's Guide 5-6 Using VMS Commands If you are connected to the printer through a DECnet network, you can use the VMS PRINT command parameter INPUT_Input bin to select a paper input bin. The PRINT command syntax for input bin selection is $ PRINT/QUEUE= queue/para...

Feeding Paper QMS 4525 Print System User's Guide 5-8 „ PD300, PD500 and PD1000 offset plates „ Adhesive labels „ Durable form „ Drafting film „ Drafting paper „ Clear adhesive film „ Preprinted paper (quick-drying and heat-proof ink) „ 53 lb. (200 g/m 2 )paper • 1RWH2QOEJP SDSHUIXVLQJLVVOLJKWO\UHGXF...

Selecting a Language or Emulation QMS 4525 Print System User's Guide 5-10 Side Output Bin Selecting a Language or Emulation The QMS 4525 printer can process and print files that use the follow-ing languages or emulations: „ ESP „ PostScript „ imPRESS „ HP PCL 5 „ HP-GL „ Lineprinter When you print f...

Selecting a Language or Emulation 5-11 Printing Your Files „ LN03 „ CCITT Groups 3 and 4 Selecting the Default Language or Emulation The system administrator chooses a default language or emulation from the control panel or from a console. (See the system administra-tor's guide for additional inform...

Duplex Printing QMS 4525 Print System User's Guide 5-12 your file. (See the VMS Interface for QMS Printers manual for com- plete information.) Using UNIX Commands If you are connected to the printer through a UNIX host, and you have QMS UNIX host software installed, you can use the -l option to the ...

Duplex Printing 5-13 Printing Your Files The illustration below shows the difference between these two types. To use tumble duplex, duplex must also be selected. Selecting the Default Duplexing The system administrator chooses the default settings (On or Off) for the duplex and tumble duplex options...

Printing Multiple Copies 5-15 Printing Your Files Printing Multiple Copies The QMS 4525 printer can print up to 1000 copies of your file. (See “Collating Output,” later in this chapter, for infor mation on how colla-tion affects multiple copies.) Selecting the Default Copies The system administrator...

Collating Output QMS 4525 Print System User's Guide 5-16 The PRINT command syntax for multiple copies is $ PRINT/COPIES= number filename Your choice for number may be any number between 1 and 1000. If you use a number greater than 1000, only 1000 copies will print. (See the VMS Interface for QMS Pri...

Collating Output 5-17 Printing Your Files stacker/stapler. The illustration below shows the collated and uncol-lated stacking for two copies of a three-page file. The system administrator chooses the default collation setting for all print jobs via the Configuration menu. (See the system administrat...

Selecting Page Orientation QMS 4525 Print System User's Guide 5-18 %%IncludeFeature: newlayout command in appendix E, the "DOC Commands" section of the System Administrator’s Guide.) Selecting Page Orientation You may select either por trait or landscape orientation. The system administrator...

Selecting Page Orientation QMS 4525 Print System User's Guide 5-20 Normal Duplex Insert three-hole-punched paper with the holes as shown in these illustrations: With the paper loaded like this the QMS 4525 Print System correctly prints portrait and landscape simplex or normal duplex pages. 6LPSOH['X...

Number Up Printing 5-21 Printing Your Files Tumble Duplex Number Up Printing Your printer has the capability to do number-up printing using QMS DOC commands. Number-up printing allows you to print a high vol-ume of pages on less paper. For example, you may choose 2-up (two pages printed on one side ...

Stapling Your Print Jobs QMS 4525 Print System User's Guide 5-22 Commands manual for complete information on how to do number-up printing. Stapling Your Print Jobs If your printer has a stacker/stapler installed, you can staple print jobs of up to 35 sheets in the upper-left corner (por trait orient...

Offset Stacking 5-23 Printing Your Files Offset Stacking Offset stacking separates multiple copies (stapled or unstapled) of print jobs by offsetting alternating sets 1.06" (27 mm). The system administrator chooses the offset stacking default from the Administration/Engine Setup/Finisher Setup m...

Printing on Transparencies and Labels QMS 4525 Print System User's Guide 5-24 Printing on Transparencies and Labels You can print transparencies for overhead projectors and sheets of self-adhesive labels with your printer. Printing Transparencies Transparencies must be printed using manual feed. Use...

Printing Special Pages 5-25 Printing Your Files 2 Select Yes. The following message displays: CANCELING JOB 3 When all pages have been delivered to the side output bin, IDLE displays. • 1RWH'RQRWWXUQWKHSULQWHURIIWRFDQFHODMRE Using a Console You can use a local or remote console to cancel print jobs ...

Printing Special Pages QMS 4525 Print System User's Guide 5-26 „ Pages printedThe number of pages printed by the current controller/hard disk configuration. „ InterfaceCurrent configurations of the standard and optional interfaces. „ ReleasePrinter fir mware release date. Printer Status Page The pri...

Printing Special Pages 5-27 Printing Your Files Procedure To print a status page, make sure the printer is on line and idle, and press the Status Page key. Printing Header and Trailer Pages The QMS 4525 printer has the ability to print header and trailer pages between files. These pages, also known ...

Clearing Paper Jams 6-3 Troubleshooting Clearing Paper Jams Since only paper is fed through the automatic paper-handling system, this section refers to “paper” jams rather than “media” jams. All other media is fed from the manual feed slot and is output into the standard output bin. The section on c...

Clearing Paper Jams QMS 4525 Print System User's Guide 6-4 appears, there is probably a paper jam somewhere in the input sec-tion of the printer. To clear a paper jam in the paper input section When You Have Finished Once all jammed paper has been removed, press the Continue key on the control panel...

Clearing Paper Jams 6-5 Troubleshooting Duplex Unit Paper Jams A paper jam can occur in the duplex unit at any one of the following locations: „ Duplex unit „ Duplex unit return path „ Under the manual feed plate If the message: PAPER JAM DUPLEXER displays, there is probably a paper jam in one of th...

Clearing Paper Jams QMS 4525 Print System User's Guide 6-8 Output Path Paper Jams A paper jam can occur along the output path in the „ Sor ter bins „ Deposit valve If a paper jam occurs along the output path, this message displays: PAPER JAM SORTER BIN Use the following instructions to locate and cl...

Printer Fails to Print 6-11 Troubleshooting When You Have Finished Once all jammed paper has been removed, press the Continue key on the control panel. The printer then resumes printing, star ting with those not properly deposited in the standard output bin when the jam occurred. You must then repri...

Control Panel Status Messages QMS 4525 Print System User's Guide 6-12 Control Panel Status Messages Status messages in the control panel message display provide infor-mation about your printer and help you locate many problems. They are prioritized in order of severity with only the highest priority...

Control Panel Status Messages 6-13 Troubleshooting Operational Status Messages The following status messages may appear in the control panel mes-sage window and on the console when the printer is running • 1RWH$QHQJLQHHUURUVRPHWLPHVRFFXUVDVDUHVXOWRIDQXQXVXDO FRPELQDWLRQRIHYHQWVUDWKHUWKDQDQDFWXDOSURE...

Problem Checklist QMS 4525 Print System User's Guide 6-22 Error Messages If you have a problem that you cannot resolve, contact QMS Cus-tomer National Service. See appendix A, “QMS Technical Support,” for infor mation on how to get help.The following service call message requires that you contact QM...

Other Common Printer Problems QMS 4525 Print System User's Guide 6-24 Apple Macintosh Checklist If you are experiencing problems with printing (not related to print quality), check the following: „ Is the printer properly connected to LocalTalk? „ Have you used the Chooser to choose “LaserWriter” an...

Other Common Printer Problems 6-25 Troubleshooting 2 Has the star t-up page been disabled? Use the printer control panel to make sure the start-up page is enabled. 3 Turn the printer off. From a cold start, it takes less than five minutes for the printer to warm up. Be sure you wait long enough for ...

Preventing Inaccurate Bin Level Readings QMS 4525 Print System User's Guide 6-26 Preventing Inaccurate Bin Level Readings When the sorter is available on your printer, you should do the follow-ing to prevent inaccurate bin level readings: „ Do not put paper in an empty sor ter bin. If you do, the pr...

Sources of Support QMS 4525 Print System User's Guide A-2 Sources of Support Several sources of help and infor mation are available, depending on the type of help you need: Your QMS Vendor Your local vendor (the one from whom you bought the printer) may be best equipped to help you. Your vendor has ...

Sources of Support A-3 QMS Customer Support The QMS Corporate Bulletin Board System The QMS Cor porate Bulletin Board System (BBS) contains technical suppor t notes, application notes, drivers, patches, and utilities, and you may leave technical questions not requiring an immediate response on elect...

Sources of Support A-4 QMS Customer Support QMS National Service If you have a problem you cannot resolve, contact QMS National Ser-vice. The following service call message requires that you contact QMS National Service: SERVICE CALL xxx Phone Numbers (800) 762-8894 Service infor mation and maintena...

QMS World-wide Offices QMS 4525 Print System User's Guide A-6 QMS World-wide Offices ™ United States/Latin America QMS, Inc.One Magnum PassMobile, AL 36618(205) 633-4300 Product Information: (800) 631-2692 or (800) 631-2696National Service: (800) 858-1597OEM Information: (800) 631-2692Consumables: (...

Print Engine Specifications QMS 4525 Print System User's Guide B-2 Print Engine Specifications Type Electronic laser printer, floor model. Resolution 300 dpi (dots per inch) or 12 dots per millimeter. Laser Safety The overall printer operating condition is Laser Class 1 apparatus according to IEC 82...

Print Engine Specifications B-3 Technical Specifications Lower Input Bin „ Capacity 1600 sheets of 20 lb (75 g/m 2 ) paper „ Supported Paper Weights 20 to 27 lbs (75 to 100 g/m 2 ) Input Bin Configuration Each input bin can be configured to accommodate one size paper. The possible combinations for t...

Print Engine Specifications QMS 4525 Print System User's Guide B-4 Each sorter bin can hold a maximum of 100 sheets of 16 to 27 lb (60 to 100 g/m 2 ) paper or a maximum of 50 sheets of 27 to 32 lb (100 to 120 g/m 2 ) paper. „ 40-bin face-down sorter Total capacity–4000 sheetsEach sorter bin can hold...

Print Engine Specifications B-5 Technical Specifications Developing System Magnetic brush development with mono-component toner. Toner can be refilled by the system administrator or by a QMS Service Engineer. Fusing Mechanism Heat and pressure. Toner Print capacity per 3.2 lb (1.45 kg) bottle of ton...

Physical Specifications QMS 4525 Print System User's Guide B-6 Physical Specifications Weight „ Print engine 860.0 lbs (418 kg) „ 20-bin sorter 167.6 lbs (76 kg) „ 40-bin sorter 253.6 lbs (115 kg) „ Stacker/stapler 180.8 (82 kg) Weight of Packaging „ Print engine 143.3 lbs (65 kg) „ 20-bin sorter 22...

Physical Specifications B-7 Technical Specifications „ With buffers 57.7" (1465 mm) Depth „ Without buffers 29.0" (735 mm) „ With buffers 30.3" (770 mm) Space Requirements „ For operator: 24" (600 mm) at the front, on the right-hand and the left-hand side „ For service: 24" (600 ...

Hard Disks QMS 4525 Print System User's Guide B-8 Hard Disks Only QMS 344 MB internal and external hard disks are approved. Contact your QMS vendor. See appendix A, “QMS Customer Sup-port,” for a information on how to contact your QMS vendor. Print Media Specifications Supported Print Media Input Bi...

Print Media Specifications B-9 Technical Specifications „ Drafting film „ Drafting paper „ Preprinted paper (quick-drying and heat-proof ink) • 1RWH7KHLQNPXVWEHKHDWUHVLVWDQWXSWRŠ)Š&IRU VHFRQGVDQGSUHVVXUHUHVLVWDQWXSWROELQ NJFP IRU PLOOLVHFRQGV Do Not Use The following media is unsupported: „ Thin...

Consumables QMS 4525 Print System User's Guide B-10 • 1RWH,IDUHTXHVWHGSDSHUVL]HLVQRWLQVWDOOHGLQWKHSULQWHU\RXDUH SURPSWHGWRLQVWDOOWKHFRUUHFWSDSHU Consumables Toner Mono-component toner. The toner is not classified as hazardous waste under the present EPA regulations. Place in a plastic bag or other s...

Consumables B-11 Technical Specifications Master Belt Zinc oxide photoconductive belt for laser printers. To our knowledge, this master belt presents no health hazards in nor-mal use. Material is not classified as hazardous waste under the present EPA regulations. Dispose of it in accordance with an...

Manual Notice QMS 4525 Print System User's Guide C-2 Manual Notice QMS, Inc. reserves the right to make changes to this manual and to the equipment described herein without notice. Considerable effor t has been made to ensure that this manual is free of inaccuracies and omissions. However, QMS, Inc....

Laser Safety C-3 Manual Notices 0 :$51,1* 7RSUHYHQWHOHFWULFDOVKRFNGRQRWUHPRYHDQ\FRYHUVIURP\RXU SULQWHUXQOHVV\RXDUHH[SHULHQFHGLQZRUNLQJZLWKFLUFXLWERDUGVDQGDUH IROORZLQJLQVWUXFWLRQVIRUSURFHGXUHVGHVFULEHGLQ406GRFXPHQWDWLRQ $&+781* 8PHOHNWULVFKH.XUW]VFKOÖVVH]XYHUPHLGHQHQWIHUQHQ6LHNHLQH *HKDÖVWHLOHYR...

International Notices QMS 4525 Print System User's Guide C-4 Vfg 1046/1984 Conformity Statement Hierdurch bescheinigen wir, daß dieses Produkt in Übereinstimmung mit Postordnung 1046/1984 ist und RFI unterdrückt ist. Die Geschäftslage und der Verkauf diese Geräte auszuprobieren, mit der Übereinstimm...

Colophon C-5 Manual Notices Your printer complies with the Electronics Emissions Requirements of the European Economic Council directive. 82/499/EEC Colophon This manual was written and formatted in FrameMaker. Some illustra-tions were created in Adobe Illustrator and translated to WMF format using ...

Glossary 0..9,%.. Key When you are entering data through the control panel, this key cycles through numeric values from 0 - 9, followed by punctuation keys and symbols such as !, @, #, $. A/a Key This key is disabled; pressing it has no effect. Alphanumeric Value A value consisting of alphabetic let...

DTR/DSR QMS 4525 Print System User's Guide G-6 DTR/DSR Data Terminal Ready/Data Set Ready. DTR/DSR is a hardware-controlled protocol. It controls the flow of data via signals on the DTR line, as opposed to XON/XOFF protocol, which is software controlled. Emulation The ability of the printer to respo...

Token-Ring Network QMS 4525 Print System User's Guide G-18 length or existence of such an interval. Token-Ring Network A ring (or closed loop) local area network that uses token passing for data access. Trailer Page A special page printed after a print job that identifies the print job and helps use...

Index 3+Open 1-63Com 1-6 A A..Z key 2-16A/a key 2-16AppleTalk 6-24, G-2Automatic jam recovery 2-28Automatic paper feed 3-5 B Back key 2-15Banner pages 5-27Banyan VINES 1-6Bin level readings 6-26Buffer sizes 5-26Bulletin board, QMS A-3 C Cancel key 2-14Canceling a print job 5-24Canceling Job (status ...