IBM PROJECTOR C400 - Manuals
IBM PROJECTOR C400 – Manual in PDF format online.
Manuals:
Manual IBM PROJECTOR C400
Summary
Contents Safety information . . . . . . . . . . v General safety guidelines . . . . . . . vii Service . . . . . . . . . . . . . . . . vii Power cords and power adapters . . . . . . . vii Extension cords and related devices . . . . . . viii Plugs and outlets . . . . . . . . . . . . viii Batteries . ....
General safety guidelines Always observe the following precautions to reduce the risk of injury and property damage. Service Do not attempt to service a product yourself unless instructed to do so by the IBM Support Center. Use only an IBM authorized service provider who is approved to repair your p...
Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the powe...
shorten the life of the battery and can also pose a safety hazard. Do not let rechargeable Lithium-Ion batteries completely discharge or store these batteries in a discharged state. Heat and product ventilation Computers generate heat when turned on and when batteries are charging. Notebook PCs can ...
Registering your option Thank you for purchasing this IBM ® product. Please take a few moments to register your product and provide us with information that will help IBM to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you,...
Chapter 1. Product description The IBM C400 PROJECTOR projects a bright, quality image that enables you to make professional presentations. Being lightweight and compact in size the C400 is a great departmental solution and allows you to move it easily from the boardroom to the conference room, or t...
Chapter 2. Setting up the projector This chapter provides information on positioning the projector, connecting a computer source and displaying and adjusting an image. Starting the projector To start the projector, do the following: 1. Connect the power cord to the projector as shown below. Connect ...
The projector prepares for shut-down and the Wait a moment message displays, as shown below. The projector turns off automatically within 5 seconds. Note: This operation can be cancelled by pressing a button other than the Power button. Pressing the Power button again will turn off power. Note: Leav...
1. Twist the rings on the projector to adjust the focus 1 and zoom 2 , as shown below. 2. Use the Keystone buttons on the projector or the remote to correct image-trapezoid (wider top or bottom) effect. The Keystone buttons on the remote and projector are shown below. The keystone control appears on...
Chapter 4. Using the projector features This chapter provides information on installing the remote control batteries and on using the remote control, audio, keypad buttons, and other projector features. Before you begin Before you can use the remote control, you must install the AAA batteries that c...
Chapter 5. On-Screen Display menu controls This projector has an On-Screen Display (OSD) that lets you make image adjustments and change various settings. Note: You must have a display on the screen in order to access the OSD. Navigating the OSD You can use the remote control or the buttons on the t...
Item Description Default Gamma Press the cursor left/right button to adjust the gamma correction of the display. Input/Gamma/Brightness: PC/2.2/High, MAC/1.8/High, Video/2.4/Low, Chart/2.2/Low, B&W/2.4/High PC Color Space Press the cursor left/right button to adjust the color space. Range: Auto/...
Item Description Default Horizontal position Press the cursor left/right button to move the image left or right. Range: 0 to 100 50 Vertical position Press the cursor left/right button to move the image up or down. Range: 0 to 100 50 Keystone Press the cursor left/right button to correct distortion ...
The following table shows the options that you will see in the Options menu and the default. Item Description Default Blank Screen Press the cursor left/right button to select a background color for blank screen. Range: Black/Red/Green/Blue/White Blue Auto Source Press the cursor left/right button t...
Item Description Default Video automatic gain control (AGC) Press the cursor right/left button to enable or disable AGC for video source. Range: On/Off On Projection Press the cursor left/right button to select from four projection methods. Range: Desktop mount, front of screen/Desktop mount, rear o...
2. Press the cursor left/right button to move to the Information menu. 3. Press the cursor up/down button to move up and down in the Information menu. The Information menu is shown below. The following table shows the options that you will see in the Information menu. Item Description Video Informat...
Chapter 6. Remote network operation When connected to a Local Area Network (LAN) by means of the RJ-45 connector, the projector can be controlled remotely through a Web browser by any of the clients (PCs connected to the LAN) on the LAN. The projector can also be accessed outside the LAN, provided a...
1. Enter the address of the projector in the address bar of your browser. Example: http://10.0.50.100 The Remote page opens. 2. Click IP Settings . 3. Check the DHCP Address radio button and click Set . Enabling and disabling passwords The default setting is Disable and no password has been set. 6-6...
1. Click Administrate Settings . The Administrate Settings page opens. 2. Enter the amount and click Set . Retrieving a forgotten password Refer to the following to retrieve a forgotten password. 6-8 IBM C400 PROJECTOR: User ’s Guide
Appendix D. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of the product. Refer to your IBM Statement of Limited Warranty for a full explanation of IBM warranty terms. Online technic...
Jurisdiction All of our rights, duties, and obligations are subject to the courts of the country in which you acquired the Machine. Part 2 - Country-unique Terms AMERICAS ARGENTINAJurisdiction: The following is added after the first sentence: Any litigation arising from this Statement of Limited War...
International Business Machines Corporation New Orchard Road Armonk, NY 10504 Telephone: 1-919-543-2193 Tested To ComplyWith FCC Standards FOR HOME OR OFFICE USE Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003. Avis de conformite a...
IBM Manuals
-
IBM SC41-5210-04
Manual
-
IBM TM7
Manual
-
IBM 8677
Manual
-
IBM EM78P809N
Manual
-
IBM 610
Manual
-
IBM AIX 4.3
Manual
-
IBM 8128
Manual
-
IBM PANEL1173-841
Manual
-
IBM L150
Manual
-
IBM E50
Manual
-
IBM 8319
Manual
-
IBM DS3300
Manual
-
IBM 9519-AG1
Manual
-
IBM 6.00E+04
Manual
-
IBM PD78082(A)
Manual
-
IBM S544-5343-03
Manual
-
IBM PPC-1510PT
Manual
-
IBM 37L1388
Manual
-
IBM V2.3
Manual
-
IBM DS4500
Manual