IBM PRO/100 SP - Manuals

About this book This manual contains instructions for installing and using your Intel ® PRO/100 SP Mobile Combo Adapter. The manual is divided into two parts: Part 1: Installation and user ’s guide: This guide contains the product description, hardware and softwareinstallation. Part 2 Appendixes Thi...

viii Intel ® PRO/100 SP Mobile Combo Adapter: User ’s Guide

Part 1: Installation and user’s guide This section contains instructions on how to install and use the Intel PRO/100SP Mobile Combo Adapter. System requirements Before installing the PRO/100 adapter, be sure that your system has thefollowing: v One open Mini-PCI slot v The latest BIOS for your compu...

21. Type x :\modem\winnt\setup.exe where x is the drive letter of the CD-ROM drive. 22. Click OK on Do you want to install the modem driver? After the Lucent Win Modem driver installs, click OK to restart your computer. 23. Exit Windows Explorer and restart to complete installation of the LucentWin ...

Advanced features This section presents advanced information for adapters that support theadvanced features listed. Tasks within this section should be handled only bysystem administrators. Advanced adapter features To access the advanced features of the adapter, perform the following: 1. In the Con...

Although this is the safest setting, the best performance is achieved when thethreshold parameter is as low as possible without producing underruns. Toexperiment, set the parameter to 16. Then, if performance drops significantly,increase the value in small increments. Coalesce Buffers The rcommended...

requires only one PCI transaction, the PCI bus is more efficient, but transmittime is slightly longer. When the option is disabled, the packets are notcoalesced, and each packet requires several PCI transactions. The PCI bus isless efficient, but transmit time is faster. Receive Buffers The recommen...

When traffic is prioritized at the host or entry point of the network, networkdevices can base forwarding decisions on priority information defined in thepacket. Priority Packet prioritizes traffic on the basis of priority filters—parameters youassign to be applied to outgoing (transmit) packets. Us...

Wake on LAN The Wake on LAN (WOL) feature operates according to a publishedspecification. In simple terms, the specification enables designers to buildnetwork adapters that are capable of “listening” to network activity evenwhen the computer is turned off. WOL adapters have a special low-power stand...

3. On the Adapters tab, select the adapter you want to be on a VLAN. 4. Click Properties. 5. In PROSet, click Join VLAN. 6. Type the VLAN ID and the VLAN Name. Note: The VLAN ID must match the VLAN ID on the switch. The Valid IDrange is from 0–4095. The VLAN Name is for informational purposesonly, a...

Configuration Setup The Boot Agent software provides configuration options that allow you tocustomize the behavior of the Boot Agent software. Changing the Boot Agentconfiguration will usually be required only the first time you add a newnetwork adapter to a client computer within your network. You ...

Appendix A. Troubleshooting This section contains information on troubleshooting for the network adapterand modem. Troubleshooting network adapter The following table describes troubleshooting for the network adapter. Problem Action The Combo cardcan’t connect to theNetwork. v Make sure that the cab...

Troubleshooting modem The following table describes troubleshooting the modem. Problem Action Your modem does not workproperly after you install thedevice driver. Check the following: v The cable is connected to the modem card correctly. v You selected Intel PRO/100 SP Mobile ComboAdapter applicatio...

Appendix B. Modem function This section describes information about general modem hardware function,AT command summary, and AT commands reference S-registers. For additionalinformation, refer to Lucent Technologies, Host-Based Controller Modem ATCommand Set, Version 1.1, June 15, 1998. General Modem...

Table 3: Supported Functions Separate Homologation Country parameters in binary file [Except OS/2] CLKRUN# support. CLKRUN# should not be asserted if no data transaction for modem(or LAN) NT 4.0 APM Support through TP port DD for Windows NT 4.0 with the latest servicepack Note: Meter Tone (billing t...

Table 5: The S-Register Summary. The S-registers 42 and 43 are for testing and debugging purposes only. Register Default Description S10 20 Automatic disconnect delay S11 95 DTMF dialing speed S12 50 Escape guard time S14 8 General bit-mapped options status S21 48 V.24 bit-mapped options status S22 ...

0 = Numeric (V0) 1 = Verbose (Vl) (Default) Bit 6 Pulse dial PPS selection (&Pn) 0 = 10 PPS (&p0, &p1) (Default) 1 = 20 PPS (&p2) Default: 8 (00001000b) S21 V.24/General Bit Mapped Options Status Indicates the status of command options. Only bits 3, 4, and 5 are used,read-only. Bits ...

S37 = 4 reserved S37 = 5 1200 bit/s S37 = 6 2400 bit/s S37 = 7 4800 bit/s S37 = 8 7200 bit/s S37 = 9 9600 bit/s S37 = 10 12000 bit/s S37 = 11 14400 bit/s S37 = 12 16800 bit/s S37 = 13 19200 bit/s S37 = 14 21600 bit/s S37 = 15 24000 bit/s S37 = 16 26400 bit/s S37 = 17 28800 bit/s S37 = 18 31200 bit/s...

S38=3 34 kbit/s S38=4 36 kbit/s S38=5 38 kbit/s S38=6 40 kbit/s S38=7 42 kbit/s S38=8 44 kbit/s S38=9 46 kbit/s S38=10 48 kbit/s S38=11 50 kbit/s S38=12 52 kbit/s S38=13 54 kbit/s S38=14 56 kbit/s The number of robbed-bit signaling (RBS) frames detected decreases the trueDCE rate per the following t...

Table 7: S36 and S48 Configuration Settings S48 = 7 S48 = 128 S36 = 1, 3 LAPM or async async S36 = 4, 6 LAPM, MNP, or hangup MNP or hangup S36 = 5, 7 LAPM, MNP, or async MNP or async S89 Timer to Control Sleep Mode This command displays the number of seconds of inactivity (no characters sentfrom the...

Appendix C. Specifications This section provides information about the Adapter and LAN specifications. Adapter specifications Table 8: Specifications Feature Value Power requirements 300mA @ =5Vdc (1.5 w) Interrupt PCI: INTA LEDs Link, Activity Operating temperature (0 - 55° C), 32 - 131° F Humidity...

Appendix D. Help and service information This section contains information on how to obtain online and telephonetechnical support. Online technical support Online technical support is available during the life of your product. Onlineassistance can be obtained through the Personal Computing Support W...

For the support telephone number and support hours by country, refer to thefollowing table or to the enclosed technical support insert. If the number is notprovided, contact your IBM reseller or IBM marketing representative. Responsetime may vary depending on the number and nature of the calls recei...

Appendix E. Product warranty and notices This section contains produce warranty information and notices. and Warranty Statements The warranty statements consist of two parts: Part 1 and Part 2. Part 1 variesby country. Part 2 is the same for both statements. Be sure to read both thePart 1 that appli...

During the warranty period IBM or your reseller, if approved by IBM toprovide warranty service, will provide repair and exchange service for theMachine, without charge, under the type of service designated for the Machineand will manage and install engineering changes that apply to the Machine. If a...

IBM Statement of Warranty Worldwide except Canada,Puerto Rico, Turkey, United States (Part 1 - General Terms) This Statement of Warranty includes Part 1 - General Terms and Part 2 -Country-unique Terms. The terms of Part 2 may replace or modify those of Part 1. The warranties provided by IBM in this...

THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES ANDREPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESSFOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOUSPECIFIC LEGAL RIGHTS AND YOU MAY ALSO ...

serial-numbered Machine and 2) at an engineering-change level compatiblewith the feature, conversion, or upgrade. Many features, conversions, orupgrades involve the removal of parts and their return to IBM. A part thatreplaces a removed part will assume the warranty service status of theremoved part...

1. damages for bodily injury (including death) and damage to real propertyand tangible personal property; and 2. the amount of any other actual direct damages, up to the greater of U.S.$100,000 (or equivalent in local currency) or the charges (if recurring, 12months’ charges apply) for the Machine t...

PEOPLE’S REPUBLIC OF CHINA: Governing Law: The following is added to this Statement: The laws of the State of New York govern this Statement. INDIA: Limitation of Liability: The following replaces items 1 and 2 of this Section: 1. liability for bodily injury (including death) or damage to real prope...

Yugoslav Republic of Macedonia (FYROM), Moldova, Poland, Romania, Russia,Slovak Republic, Slovenia, or Ukraine, you may obtain warranty service forthat Machine in any of those countries from either (1) an IBM resellerapproved to perform warranty service or (2) from IBM. The applicable laws, Country-...

The following replaces the second paragraph of this Section: Unless otherwiseprovided by mandatory law, IBM and your reseller are not liable for any of thefollowing: (items 1 and 2 unchanged) 3) indirect damages, even if IBM or yourreseller is informed of their possibility. SOUTH AFRICA, NAMIBIA, BO...

will be the same on generally available systems. Furthermore, somemeasurements may have been estimated through extrapolation. Actual resultsmay vary. Users of this document should verify the applicable data for theirspecific environment. Trademarks The following terms are trademarks of the IBM Corpo...

IBM authorized dealers. IBM is not responsible for any radio or televisioninterference caused by using other than recommended cables and connectors orby unauthorized changes or modifications to this equipment. Unauthorizedchanges or modifications could void the user ’s authority to operate theequipm...

to your line, as determined by the REN, you should call your localtelephone company to determine the maximum REN for your calling area. 3. If the device causes harm to the telephone network, the telephone companymay discontinue your service temporarily. If possible, they will notify youin advance; i...

AVIS : L’indice d’équivalence de la sonnerie (IES) assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordésà une interface. La terminaison d’une interface téléphonique peut consister enune combinaison de quelques dispositifs, à la seule condition que la ...

Network Compatibility Declaration This equipment is intended for connection to the Public Switched TelephoneNetwork, and supports both DTMF signalling and pulse dialing for thenetwork addressing. It has been designed to be compatible and interwork with the Europeannetworks in EC and EFTA countries, ...

Telepermitted equipment of a different make or model, nor does it imply thatany product is compatible with all of Tel ecom’s network services. Some parameters required for compliance with Telecom’s Telepermitrequirements are dependent on the equipment (PC) associated with this device.The associated ...

Appendix F. User notices v This card is intended for use with UL1950/EN60950/IEC60950 (or otherNTRL) listed ITE computers that contain a Mini PCI type 3A connector. v Care should be taken to avoid damaging the insulation tape on the XircomMini PCI Modem 56 + 10/100 Ethernet card. Do not cut, tear, p...