IBM P76 - Manuals

iv TEHLİKE Elektrik çarpması tehlikesinden kaçınmak için: • Kapakları çıkarmayınız. • Bu cihazı kaidesine takılı durumda değilken çalıştırmayınız. • Bu cihazı elektriksel fırtına sırasında prize takmayınız veya prizden çıkarmayınız. • Elektrik kablosunun fişi, elektrik ve toprak bağlantıları usulüne...

Edition 1 This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to theinformation herein; these changes will be made in later editions. IBM may make improvements and/or changes in theproduct(s) and/or program(s) at any time. It is possible that ...

1 Getting Started F GB ES C T ABLE OF CONTENTS • E NERGY S TAR is a U.S. registered mark. • Trinitron ® is a registered trademark of Sony Corporation. • VGA is a registered trademark of IBM Corporation of the U.S.A.• VESA is a trademark of Video Electronics Standard Association.• All other product n...

2 Getting Started Use of the Tilt-Swivel This monitor can be adjusted within the angles shownbelow. To find the center of the monitor’s turning radius,align the center of the monitor’s screen with the centeringdots on the stand.Hold the monitor at the bottom with both hands when youturn it horizonta...

3 Getting Started Getting Started F GB ES C Identifying Parts and Controls See the pages in parentheses for further details. Front 1 ? (reset) button (page 13) Resets the adjustments to the factory settings. 2 ¨ (brightness) down and up ( . / > ) buttons (pages 5 – 13) Adjust the picture brightne...

4 Getting Started to a power outlet to AC IN Power cord To a computer withan HD15 video output Setup This monitor works with platforms running at horizontalfrequencies between 30 and 96 kHz. Step 1: Make sure the computer and monitor are switched off Step 2: Connect the monitor to the computer Conne...

5 Getting Started F GB ES C Customizing Your Monitor Before adjusting • Connect the monitor and the computer, and turn them on. Selecting the On-screen DisplayLanguage If you need to change the OSD language, see “Using theLANGUAGE On-screen Display” on page 10.The default setting is English. Adjusti...

Customizing Your Monitor 6 To adjust the horizontal centering of thepicture adjust the vertical centering of thepicture adjust the horizontal size of thepicture adjust the vertical size of the picture enlarge and reduce the picture Using the SIZE/CENTER On- screen Display The SIZE/CENTER settings al...

Getting Started Customizing Your Monitor F GB ES C 9 Using the CONVERGENCE On-screen Display The CONVERGENCE settings allow you to adjust thequality of the picture by controlling the convergence.The convergence refers to the alignment of the red, green,and blue color signals.If you see red or blue s...

10 Customizing Your Monitor Using the LANGUAGE On-screen Display English, French, German, Spanish, Italian, Dutch, Swedish,Russian and Japanese versions of the OSDs are available. 1 Press the button. The MENU OSD appears. 2 Press the . / > buttons to select “ LANGUAGE,” and press the button again...

11 Getting Started F GB ES C Customizing Your Monitor Changing the on-screen display position You can change the OSD position (for example, when youwant to adjust the picture behind the OSD). 1 Press the button. The MENU OSD appears. 2 Press the . / > buttons to select “ OPTION,” and press the bu...

12 Customizing Your Monitor Locking the controls You can protect adjustment data by locking the controls. 1 Press the button. The MENU OSD appears. 2 Press the . / > buttons to select “ OPTION,” and press the button again. The OPTION OSD appears. 3 Press the . / > buttons to select “ (CONTROL ...

13 Getting Started F GB ES C Customizing Your Monitor Resetting the Adjustments Resetting an adjustment item 1 Press the , . / > buttons to select the OSD containing the item you want to reset. 2 Press the . / > buttons to select the item you want to reset. 3 Press the ? (reset) button. Resett...

14 Technical Features Plug & Play This monitor complies with the DDC  1, DDC2B and DDC2Bi Display Data Channel (DDC) standards of VESA.When a DDC1 host system is connected, the monitorsynchronizes with the V. CLK in accordance with the VESAstandards and outputs the EDID (Extended DisplayIdentif...

15 Getting Started F GB ES C Technical Features Preset Modes No. 1 2 3 4 5 6 7 8 Resolution(dots × lines) 640 × 480 640 × 480 640 × 480 800 × 600 800 × 600 1024 × 768 1024 × 768 1280 × 1024 HorizontalFrequency 31.5 kHz 37.5 kHz 43.3 kHz 46.9 kHz 53.7 kHz 60.0 kHz 68.7 kHz 80.0 kHz VerticalFrequency ...

16 Additional Information Troubleshooting This section may help you isolate the cause of a problem and as a result, eliminate the need to contact technical support. Symptom Check these items No picture If the u indicator is not lit If the “CHECK SIGNALCABLE” message appears onthe screen, or if the u...

18 Additional Information Specifications Picture tube 0.24 mm aperture grille pitch17 inches measured diagonally90-degree deflection Viewable image size Approx. 327 × 243 mm (w/h) (12 7 / 8 × 9 5 / 8 inches) 16.0” viewable diagonal Resolution Horizontal: Max. 1600 dotsVertical: Max. 1200 lines Stand...

I Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallati...

II MPRII This product complies with Swedish National Council for Metrology (MPR) standards issued in December 1990 (MPRII) forvery low frequency (VLF) and extremely low frequency (ELF). Hinweise Gemäß der Amtsblätter des BMPT Nm. 61/1991 und 6/1992 wird der Betreiber darauf aufmerksam gemächt, daß d...

III European Union (EU) Statement This product has been tested and found to comply with the limits for Class B Information Technology Equipment according toCISPR 22 / European Standard EN 55022. The limits for Class B equipment were derived for typical residentialenvironments to provide reasonable p...

IV Statement of Limited Warranty U.S., Canada and Puerto Rico The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you originally purchase foryour use, and not for resale, from IBM or your reseller. The term “Machine” means an IBM machine, its features, convers...

Getting Started Appendix VII On this page, you will find a brief summary of the environmental requirements met by this product. The completeenvironmental criteria document may be ordered from: TCO Development UnitS-114 94 StockholmSwedenFax: +46 8 782 92 07Email (Internet): [email protected]...

VIII Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developedfor professional use. Your purchase has also contributed to reducing the burden on the environment and also to the furtherdevelopment of environmentally adapted ...

Getting Started Appendix IX Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magneticfields, physical and visual ergonomics and good usability. Below you will find a brief summary of the environmental requirements met by this product....

X Service Information The following parts are for use by IBM service, or IBM authorized dealers, to support customerwarranty. Parts are for service use only. Part No M/T-Model Description 21L4572 6556-03N Monitor UVNH (Pearl White), NA/EMEA 21L4573 6556-43N Monitor UVNH (Stealth Gray), NA/EMEA 61H02...