IBM LCD PC - Manuals - manualsarea.com

Page 2 - Copyright Notice

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 2 Copyright Notice This document is copyrighted, 2003. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without no...

Page 3 - Acknowledgments

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 3 Acknowledgments Intel and Pentium are registered trademarks of Intel® Corporation. IBM, PC/AT, PS/2 are trademarks of International Business Machines Corporation. Microsoft Windows is a registered trademark ...

Page 4 - Packing List

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 4 Packing List Before installing your Panel PC, please check if the package contains the following items. Onyx-158/S series Panel PC CD-ROM Contains User’s Manual, Drivers and Utilities Accessories - Screws ba...

Page 6 - Danger of explosion if battery is incorrectly replaced. Replace; FCC Safety; This device complies with Part 15 FCC Rules.

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 6 14. If any of the following situations arises, get the equipment checked by service personnel: a. The power cord or plug is damaged. b. Liquid has penetrated into the equipment. c. The equipment has been exp...

Page 7 - Contents

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 7 Contents Copyright Notice ..................................................................... 2 Acknowledgments ................................................................... 3 Packing List..............

Page 9 - General; Chapter

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 9 General Information Chapter 1

Page 10 - Introductions

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 10 Introductions The Onyx-158/S is a compact, All-in-one network compatible PC with full safety approval and features to control a dedicated system with a wide variety of applications. Incorporation of the Ony...

Page 13 - LCD Specifications; Display type; 5” color TFT LCD; Viewing angle; Yes

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 13 LCD Specifications Display type 15” color TFT LCD Max. Resolution 1024 x 768 Max. Colors 256K Dot size (mm) 0.33 x 0.33 Luminance (cd/m 2 ) 250 (TYP) 160 ° (H) Viewing angle 160 ° (V) Operating temperature ...

Page 14 - Environmental Specification; Operating temperature: 0

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 14 Environmental Specification - Operating temperature: 0 ° to 45 ℃ (32~122 ℉ ) - Storage temperature: -20 ° to 60 ℃ (-4~140 ℉ ) - Storage humidity: 5 to 90%, non-condensing - Vibration: 10 to 150 Hz, 0.075mm ...

Page 15 - Dimensions

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 15 Dimensions Unit : m

Page 16 - Hardware

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 16 Hardware Installation Chapter 2

Page 17 - Removing/Installing the HDD Unit

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 17 The panel PC is a PC-based industrial computer that is housed in aluminum alloy front panel and heavy-duty steel chassis. You can install 2.5”HDD easily by removing the side cover of HDD drive bay. Removing...

Page 20 - Removing the rear maintenance cover; from the top cover of the desktop stand.

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 20 Removing the rear maintenance cover 1. Remove the HDD module first then unscrew the two attachment screws from the top cover of the desktop stand. Caution: Handle the desktop stand with care, since it is ma...

Page 22 - Mounting Installing

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 22 Mounting Installing Onyx-158/S is suitable for VESA75/100mm interface pads for arm mounting or desktop stand. Onys-158/S provides optional mounting kit for VESA75mm. Desktop Stand (optional mount kit: STAND...

Page 23 - Jumper

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 23 Jumper Settings Chapter 3

Page 24 - Safety precautions

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 24 Safety precautions Warning! Always completely disconnect the power cord from your chassis whenever you are working on it. Do not make connections while the power is on because sensitive electronic component...

Page 25 - Board Layout

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 25 CPU Card - PCM-6898 Jumper Setting Board Layout JP5 CN8(LAN) CN19 J9(IR) CN18 J1 CN16 J8 JP11 CN4 J3 JP3 J4 CN15 FAN2 CN1(FDD2) FDD1 C N 1 0 ID E 1 C N 1 3 (U S B 3 8 4 ) P C 1 0 4 ID E 2 C N 3 (C O M 3 ) C...

Page 26 - Board Dimensions

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 26 Board Dimensions

Page 27 - List of Jumpers; J u m p e r s; L a b e l F u n c t i o n

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 27 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The following tables show the function of each of the board's jumpers. J u m p e r s L a b...

Page 28 - Setting Jumpers; Ope n C los ed Cl osed 2 -3

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 28 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (oft...

Page 29 - PIN Function

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 29 DOC Address Setting (J2) PIN Function 1-2, 3-4 Disabled 3-4 DC00 OFF D400 1-2 D800 * *Default Audio Port CD_IN (J3 & J4) J3-2.54mm J4-2.00mm PIN Function 1 CD-L 2 GND 3 GND 4 CD_R For PCM-3730 (J5) PIN ...

Page 31 - Function

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 31 RS-232/422/485 COM2 (JP4,JP5) Setting PIN Function 1-2 RS-232 * 3-4 RS-422 5-6 RS-485 PIN Function 1-2, 4-5, 7-8, 10-11 RS-232 * 2-3, 5-6, 8-9, 11-12 RS-422 2-3, 5-6, 8-9, 11-12 RS-485 *Default Auto detect ...

Page 33 - BIOS

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 33 BIOS Installation Chapter 4

Page 34 - System test and initialization; System configuration verification

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 34 System test and initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the s...

Page 35 - Award BIOS setup; Entering setup; Standard CMOS Features

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 35 Award BIOS setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the...

Page 37 - Set Supervisor/User Password; Save and Exit Setup; Exit Without Saving

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 37 Set Supervisor/User Password Use this menu to set User and Supervisor Passwords. Save and Exit Setup Save CMOS value changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and ex...

Page 39 - Advanced BIOS Features

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 39 Advanced BIOS Features By choosing the Advanced BIOS Features option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the ...

Page 40 - Advanced Chipset Features

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 40 Advanced Chipset Features By choosing the Advanced Chipset Features option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer’s default values fo...

Page 42 - Power management setup

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 42 Power management setup By choosing the Power Management Setup from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-689...

Page 43 - PnP/PCI Configurations

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 43 PnP/PCI Configurations By choosing the PnP/PCI configurations from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-689...

Page 44 - PC Health Status

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 44 PC Health Status By choosing the PC Health Status from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-6898.

Page 45 - Frequency/Voltage Control

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 45 Frequency/Voltage Control By choosing the Frequency/Voltage Control from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the P...

Page 46 - Load Fail-Safe Defaults; Load Optimized Defaults; Set Supervisor Password; System Enter a password each time the system boots and when-

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 46 Load Fail-Safe Defaults When you press <Enter> on this item you get a confirmation dialog box with a message similar to: Load Fail-Safe Default (Y/N)? Pressing "Y" loads the BIOS default value...

Page 47 - Setup Enter a password whenever you enter Setup.; Exit without saving

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 47 Setup Enter a password whenever you enter Setup. NOTE: To clear the password, simply press Enter when asked to enter a password. Then the password function is disabled. Save & Exit setup If you select t...

Page 48 - Drivers

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 48 Drivers Installation Chapter 5

Page 49 - Please follow the sequence bellow to install the drivers:; Start

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 49 The Onyx-158/S comes with a CD, which contains most of drives and utilities of your needs. There are several ways of installation depending on the driver package under different Operating System application...

Page 50 - Ethernet Driver”

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S Onyx-158/S Series User Manual V1.2 50 the following path: “cd-rom”: \Driver\ CPU Board\ PCM-6898\ Step 3 – Install Ethernet Driver” “cd-rom”: \Driver\ CPU Board\ PCM-6898\ Step 4 – Install Audio Driver” Press the <Enter> key or click OK t...