IBM L190 - Manuals

8 Be sure to disconnect the power cord from your monitor before you performany maintenance on the monitor. Clean your monitor as follows: • Gently wipe the covers and the screen with a soft cloth, do not use solvents or abrasives. • Never drop water or other liquid into your monitor. • Remove finger...

ENGLISH 9 Connecting your monitor 1. Turn off your computer and all attached devices. Next, unplug all power cords to your computer and all attached devices. 2. Connect the signal cable. • The analog signal cable is already connected to your monitor (See in Figure A). • When connecting the analog si...

10 1. Turn on your computer. 2. Turn on your monitor by pushing and releasing the power switch marked " " at the front of the bezel. • To turn off your monitor, push and release the power switch again. 3. To update or install device drivers, follow the instructions in the Device driver insta...

ENGLISH 11 To install the device driver in Microsoft ® Windows ® 95 or Windows 98, do the following: Note:You must download files from the User’s Guide and Installation Files CD to use the Plug and Play feature in Windows 95 or Windows 98. 1. Turn off the computer and all attached devices. 2. Ensure...

12 To install the device driver in Microsoft Windows 2000 Professional orMicrosoft Windows Millennium Edition (Me), do the following: Note:You must download files from the User’s Guide and Installation Files CD to use the Plug and Play feature in Windows 2000 or Windows Me. 1. Turn off the computer ...

ENGLISH 13 To install the device driver in Windows XP, do the following: Note:You must download files from the User’s Guide and Installation Files CD to use the Plug and Play feature in Windows XP. 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. ...

14 When you first use your monitor, you must perform Auto Setup for analoginput. This procedure sets up your monitor to process the video signalsfrom your computer without image discoloration or smearing. After youperform Auto Setup, the settings are stored and used each time you turn onthe monitor....

ENGLISH 15 Image setup for DOS i If the monitor is in standbymode, it may automatically turn off while you are waiting forit to warm up. If this happens,turn off the monitor and turn iton again after a few seconds. i If you are using PC-DOS/V,change to U.S. mode by typing CHEV US and pressingenter a...

Normally, you can complete the setup procedure using Automatic Image setup ; however, if your screen image is still distorted after you perform Image setup orthe setup CD does not run on your system, perform M anual Image setup. To manually adjust the image setting, do the following: 1. Turn on the ...

CONTROLS LOCK / UNLOCK This feature allows you to secure the current control settings,while allowing the user to adjust Brightness, so that they cannotbe inadvertently changed. Push and hold the enter button [ ] for10 seconds; the message “Menu is Locked” appears.You can unlock the OSD controls at a...

ENGLISH 19 The settings adjustable with the user controls are viewed through the On -Screen Display (OSD). Press the enter button " " to display the main OSDmenu. Initial appearance of OSD On-screen display (OSD) controls i The LCD monitor needstime to become thermally stable the first time ...

22 i If your computer haspreviously been used with a CRT monitor and is currentlyconfigured to a display modeoutside the range that the FlatPanel monitor can display, youmay need to re-attach the CRTmonitor temporarily until youhave reconfigured thecomputer, preferably to 1280 x1024 at 60Hz. The dis...

ENGLISH 23 To benefit from power management, the monitor must be used inconjunction with a computer that implements the Video ElectronicsStandards Association (VESA) Display Power Management Signaling(DPMS) Standard. The power management feature is invoked when the computer recognizesthat you have n...

24 Troubleshooting If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling your retailer or IBM Support Center, trythe suggested actions that are appropriate to your problem. Problem No power tomonitor. Possible cause Suggested action Reference Br...

26 If you are unable to correct the problem yourself, you may seek further helpas follows: Call the IBM Service and Support. In the U.S.A and Puerto Rico call 1-800-426-7378In Canada (Toronto only) call 416-383-3344 In Canada (all other) call 1-800-565-3344 In other countries contact your dealer, re...

ENGLISH 27 i Power consumption figuresare for the monitor and the power supply combined. Specifications This color monitor (Type-model 9329- x x9) uses a 19.0-inch TFT LCD. Weight 4.2 kg (9.259 lbs)6.1 kg (13.45 lbs) Without Stand:With Stand: 19.0 inch (481.84 mm)376.32 mm301.056 mm0.294 mm (H) x 0....

28 FRU Monitor FRU Stand FRU Video Cable User's Guide CD Setup Guide Analog Analog Analog Business Black Business Black Business Black 9329-AB9 9329-AB9 9329-AB9 9329-xx9 9329-xx9 WW WW WW WW WW Service information The following parts are for use by IBM service, or IBM authorized dealers,to support ...

ENGLISH 29 Notices and trademarks This section contains information on notices and trademarks. Notices IBM may not offer the products, services, or feature discussed in this document in allcountries. Consult your local IBM representative for information on the products andservices currently availabl...

30 Trademarks The following terms, used in this publication, are trademarks or service marks of the IBM Corporation in the United States, other countries, or both; IBM IBM logo ThinkPad ThinkVision E NERGY S TAR and the E NERGY S TAR logo are U.S Govt. registered trademarks. Microsoft, Windows, and ...