IBM CI5VGM Series - Manuals
IBM CI5VGM Series – Manual in PDF format online.
Manuals:
Manual IBM CI5VGM Series
Summary
ii CI5VGM User’s Manual Copyright Notice This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any means or in any form, without prior consent of the original manufacturer. The information in this document has been carefully checked...
Contents CI5VGM User’s Manual iii Contents Chapter 1 Introduction............................................. 1 Checklist ..................................................................... 3 Description ................................................................. 3 Features ...................
Chapter 1 Introduction CI5VGM User’s Manual 1 Below are additional information for LCD Panel Type Select and settings for newer CPUs SW3: LCD Panel Type Select 1 2 3 4 TFT LCD Panel ON ON ON ON 640x480 –18 OFF ON ON ON 800x600 –18 ON OFF ON ON 1024x768 –18 OFF OFF ON ON 1024x768 –18+18 ON ON OFF ON ...
Chapter 1 Introduction 2 CI5VGM User’s Manual 1 Introduction This manual is designed to give you information on the CI5VGM CPU card. It is divided into the following sections: Checklist ....................................................................................... 3 Description................
Chapter 1 Introduction CI5VGM User’s Manual 3 Checklist Please check that your package is complete and contains the items below. If you discover damaged or missing items, please contact your dealer. •••• The CI5VGM Industrial CPU Card •••• This User’s Manual •••• 1 IDE Ribbon Cable •••• 1 Floppy Rib...
Chapter 1 Introduction 4 CI5VGM User’s Manual Features •••• Socket 7, CPU Speed 90~550MHz •••• Bus Speed 60/66/75/83/95/100MHz •••• VIA MVP3 AGPset •••• Up to 384MB of system memory, ECC function supported •••• Trident 9520/25 AGP VGA chipset for LCD & CRT display •••• YAMAHA 715 Audio Chip ••••...
Chapter 1 Introduction CI5VGM User’s Manual 5 •••• Memory Sockets : Three 168-pin DIMM sockets Memory types: SDRAM (Synchronous DRAM) DIMMs: EDO DRAM or SDRAM (Synchronous DRAM) DIMM Size : 8MB, 16MB, 32MB, 64MB, 128MB •••• BIOS : Y2K compliant Award BIOS, PnP support •••• FLASH EEPROM (256KB) for B...
Chapter 1 Introduction CI5VGM User’s Manual 7 Intelligence •••• Temperature Monitoring and Alert : A sensor for the CPU temperature on the CI5VGM monitors the CPU temperature and alerts the user through the speaker or buzzer when temperature exceeds the safe heat level. •••• Windows 95 shut-off: All...
Chapter 1 Introduction 8 CI5VGM User’s Manual Board Dimensions
Chapter 1 Introduction CI5VGM User’s Manual 9 This page is intentionally left blank .
Chapter 2 Installations 10 CI5VGM User’s Manual 2 Installations This chapter provides information on how to use the jumpers and connectors on the CI5VGM in order to set up a workable system. The topics covered are: CPU Installation........................................................................
Chapter 2 Installations CI5VGM User’s Manual 11 CPU Installation The CI5VGM Industrial CPU Card supports a ZIF processor socket for Pentium-level processors. Unlike PGA sockets, ZIF (Zero Insertion Force) sockets come with a lever to secure the processor. Make sure the notch on the corner of the CPU...
Chapter 2 Installations 12 CI5VGM User’s Manual Memory Installation The CI5VGM Industrial CPU Card supports three 168-pin DIMM sockets for a maximum total memory of 384MB. The memory modules can come in sizes of 16MB, 32MB, 64MB, 128MB in EDO DRAM or SDRAM type. In populating the DIMM sockets, DIMM1...
Chapter 2 Installations 14 CI5VGM User’s Manual Jumpers on the CI5VGM The jumpers on the CI5VGM allows you to configure your CPU card according to the needs of your applications. If you have doubts about the best jumper configuration for your needs, contact your dealer or sales representative. The f...
Chapter 2 Installations CI5VGM User’s Manual 15 Jumper Locations on the CI5VGM
Chapter 2 Installations 16 CI5VGM User’s Manual SW1(1-8): CPU Frequency Selector For Intel Pentium, IDT WinChip 2-3D / C6 SW1 CPU Clock AGP Clock Multiplier CPU FREQ. on on on off off off off on 60MHz 60MHz 1.5x P54C-90 off on on off off off off on 66MHz 66MHz 1.5x P54C-100 on on on off on off off o...
Chapter 2 Installations CI5VGM User’s Manual 17 For Cyrix 6x86, 6x86L, 6x86MX. MII CPU SW1 CPU Clock AGP Clock Multiplier CPU FREQ. off on on off on off off on 66MHz 66MHz 2x P166+ (133MHz) off off on off on off off on 75MHz 75MHz 2x P200+ (150MHz) off on on off on on off on 66MHz 66MHz 2.5x PR200 (...
Chapter 2 Installations CI5VGM User’s Manual 19 off off off on on off on off 100MHz 66MHz 4x K6-2/400 off off off on on on on off 100MHz 66MHz 4.5x K6-2/450 JP2: SDRAM Operating Frequency JP2 SDRAM Frequency pin 1-2 short Run CPU Clock pin 2-3 short Run AGP Clock NOTE: Set the SDRAM Frequency to Run...
Chapter 2 Installations CI5VGM User’s Manual 21 For Dual Voltage CPU: Intel P55C, Cyrix 6x86L/MX/MII, AMD K6/K6-2 SW2 V IO V CORE CPU off on off off 3.3V 2.2V K6, K6-2 (0.25 µ ) on off off off 3.3V 2.1V off off off off 3.3V 2.0V JP3: LCD Power Setting The CI5VGM XGA interface supports 5V and 3.3V LC...
Chapter 2 Installations 22 CI5VGM User’s Manual JP6: DiskOnChip BIOS Expansion Address Select JP6 Address JP6 Address 1 2 3 D0000-D7FFF 1 2 3 D8000-DFFFF (default) J11: RS232/422/485 (COM2) Selection COM1 is fixed for RS-232 use only. COM2 is selectable for RS232, RS-422 and RS-485. The following ta...
Chapter 2 Installations CI5VGM User’s Manual 23 J24: Clear CMOS Content J24 Setting Function 1 2 3 Pin 2-3 Short/Closed Clear CMOS Content 1 2 3 Pin 1-2 Short/Closed Normal Operation (default) W1: Power Supply Select W1 Function W1 Function short ATX Power open AT Power Note: Failure to set W1 corre...
Chapter 2 Installations 24 CI5VGM User’s Manual Connectors on the CI5VGM The connectors on the CI5VGM allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on CI5VGM and their respective functions. Conne...
Chapter 2 Installations CI5VGM User’s Manual 25 Connector Locations on the CI5VGM
Chapter 2 Installations 26 CI5VGM User’s Manual J1: Floppy Drive Connector J1 is a 34-pin header and will support up to 2.88MB floppy drives. Signal Name Pin # Pin # Signal Name Ground 1 2 RM/LC Ground 3 4 No connect Ground 5 6 No connect Ground 7 8 Index Ground 9 10 Motor enable 0 Ground 11 12 Driv...
Chapter 2 Installations 28 CI5VGM User’s Manual J3: External ATX Power Connector Pin # Signal Name 1 Dual function power button 2 GND 3 Dual function power button 4 GND 5 PS-ON (soft on/off) 6 5V SB (standby +5V) J3 1 6 J18: AT Power Connector Pin # Signal Name 1 N/A 2 +5V 3 +12V 4 -12V 5 GND 6 GND ...
Chapter 2 Installations CI5VGM User’s Manual 29 J4: Audio I/O Connector (Continued) The J4 Audio I/O Connector connects to the EXTVGM Audio Daughter Card with the 26-pin ribbon cable supplied with the package. The EXTVGM Audio Daughter card provides two CD-AUDIO IN internal connectors and external c...
Chapter 2 Installations 30 CI5VGM User’s Manual J6: COM1 Serial Port Pin # Signal Name 1 DCD, Data carrier detect 2 RXD, Receive data 3 TXD, Transmit data 4 DTR, Data terminal ready 5 GND, ground 6 DSR, Data set ready 7 RTS, Request to send 8 CTS, Clear to send J6 9 RI, Ring indicator 10 NC J7: COM2...
Chapter 2 Installations CI5VGM User’s Manual 31 J8: Front Bezel Connector The front bezel of the case has a control panel which provides light indication of the computer activities and switches to change the computer status. J8 is a 20-pin header that provides interfaces for the following functions....
Chapter 2 Installations CI5VGM User’s Manual 33 J9: LCD Panel Connector J9 is a dual-in-line header for flat panel LCD displays. The following shows the pin assignments of this connector. Signal Name Pin # Pin # Signal Name +12V 1 2 +12V GND 3 4 GND +5V/3.3V 5 6 +5V/3.3V ENPVEE 7 8 GND P0 9 10 P1 58...
Chapter 2 Installations 34 CI5VGM User’s Manual J14: Chassis Fan Power Connector J14 is a 3-pin header for the chassis fan. The fan must be a 12V fan. Pin # Signal Name 1 Rotation 2 +12V 1 2 3 3 Ground J22, J23: CPU Fan Power Connectors J22 and J23 are pin headers for the CPU fan. The fan must be a ...
Chapter 2 Installations CI5VGM User’s Manual 35 J17: External Mouse Connector Pin # Signal Name 1 Mouse data 2 Ground 3 5V J17 4 Mouse Clock J19: PS/2 Keyboard Connector Pin # Signal Name 1 Keyboard data 2 N.C. 3 Ground 4 5V 5 Keyboard clock J19 6 N.C. J20: PS/2 Mouse Connector Pin # Signal Name 1 M...
Chapter 2 Installations 36 CI5VGM User’s Manual J21: VGA CRT Connector Signal Name Pin # Pin # Signal Name Red 1 2 Green Blue 3 4 N.C. GND 5 6 GND GND 7 8 GND N.C. 9 10 GND N.C. 11 12 N.C. HSYNC 13 14 VSYNC J21 NC 15 J25: RJ45 Connector This connector is for the 10/100Mbps Ethernet capability of the...
Chapter 2 Installations CI5VGM User’s Manual 37 Watchdog Timer Configuration The function of the watchdog timer is to reset the system automatically and is defined at I/O port 0443H. To enable the watchdog timer and allow the system to reset, write I/O port 0443H. To disable the timer, write I/O por...
Chapter 3 BIOS Configuration 38 CI5VGM User’s Manual This page was intentionally left blank.
Chapter 3 BIOS Configuration CI5VGM User’s Manual 39 3 BIOS Configuration This chapter describes the different settings available in the Award BIOS that comes with the CI5VGM CPU card. The topics covered in this chapter are as follows: BIOS Introduction..................................................
Chapter 3 BIOS Configuration 42 CI5VGM User’s Manual BIOS Introduction The Award BIOS (Basic Input/Output System) installed in your computer system’s ROM supports Intel Pentium II processors in a standard IBM-AT compatible I/O system. The BIOS provides critical low-level support for standard devices...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 43 ROM PCI/ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP USER PASSWORD POWER MANAGEMENT SETUP IDE HDD AUTO DETECTION PNP/PCI CONFIGURATION HD...
Chapter 3 BIOS Configuration 44 CI5VGM User’s Manual Standard CMOS Setup “Standard CMOS Setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 45 Time The time format is: Hour : 00 to 23 Minute : 00 to 59 Second : 00 to 59 To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn> or +/- keys to set the current time. Primary HDDs / Secondary HDDs The onboard PCI IDE ...
Chapter 3 BIOS Configuration 46 CI5VGM User’s Manual NOTE: The specifications of your drive must match with the drive table. The hard disk will not work properly if you enter incorrect information in these fields. If your hard disk drive type is not matched or listed, you can use Type User to define...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 47 BIOS Features Setup This section allows you to configure and improve your system and allows you to set up some system features according to your preference. ROM / PCI ISA BIOS BIOS FEATURES SETUP AW ARD SOFTW ARE, INC. Virus W arning : Disabled Vi...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 49 Typematic Rate Setting When disabled, continually holding down a key on your keyboard will generate only one instance. When enabled, you can set the two typematic controls listed next. By default, this field is set to Disabled. Typematic Rate (Cha...
Chapter 3 BIOS Configuration 50 CI5VGM User’s Manual Video BIOS Shadow This item allows you to change the Video BIOS location from ROM to RAM. Video Shadow will increase the video speed. C8000 - CBFFF Shadow/DC000 - DFFFF Shadow Shadowing a ROM reduces the memory available between 640KB to 1024KB. T...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 51 Chipset Features Setup This Setup menu controls the configuration of the motherboard chipset. ROM PCI/ISA BIOS CHIPSET FEATURES SETUP AW ARD SOFTW ARE INC. Bank 0/1 DRAM Timing : SDRAM 8ns CPU W arning Temperature : 66 ° C/151 ° F Bank 2/3 DRAM Ti...
Chapter 3 BIOS Configuration 52 CI5VGM User’s Manual Video BIOS Cacheable When enabled, access to video BIOS addressed at C0000H to C7FFFH is cached, provided that the cache controller is disabled. System BIOS Cacheable When enabled, access to the system BIOS ROM addressed at F0000H-FFFFFH is cached...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 53 USB Keyboard Support The field enables or disables the support for a USB keyboard. CPU Warning Temperature This field sets the threshold temperature at which an alert is sounded through the system’s speaker. The CPU temperature is monitored by the...
Chapter 3 BIOS Configuration 54 CI5VGM User’s Manual Power Management Setup The Power Management Setup allows you to save energy of your system effectively. It will shut down the hard disk and turn off video display after a period of inactivity. ROM PCI/ISA BIOS POW ER MANAGEMENT SETUP AW ARD SOFTW ...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 55 PM Control by APM This field allows you to use the Advanced Power Management device to enhance the Max. Power Saving mode and stop the CPU’s internal clock. If the Max. Power Saving is not enabled, this will be preset to NO. Video Off Option The V...
Chapter 3 BIOS Configuration 56 CI5VGM User’s Manual Suspend Mode When enabled, and after the set time of system inactivity, all devices except the CPU will be shut off. PM Events The VGA, LPT & COM, HDD & FDD, DMA/master, PWR-ON by Modem/LAN, RTC Alarm Resume, and Primary INTR sections are ...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 57 PNP/PCI Configuration This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value. ROM PCI/ISA BIOS PNP/PCI CONFIGURATION AW ARD SOFTW ARE INC. PNP OS Installed : No...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 59 Load BIOS Defaults This option allows you to load the troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high-performance features. ROM PCI/ISA BIOS CMOS SETUP UTILITY AWARD SO...
Chapter 3 BIOS Configuration 60 CI5VGM User’s Manual Integrated Peripherals This option sets your hard disk configuration, mode and port. ROM PCI/ISA BIOS INTEGRATED PERIPHERALSP AW ARD SOFTW ARE INC. OnChip IDE First Channel : Enabled Onboard FDD Controller : Enabled OnChip IDE Second Channel : Ena...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 61 IDE Primary/Secondary Master/Slave UDMA These fields allow your system to improve disk I/O throughput to 33Mb/sec with the Ultra DMA/33 feature. The options are Auto and Disabled . Init AGP Display First This field allows the system to initialize ...
Chapter 3 BIOS Configuration 62 CI5VGM User’s Manual Supervisor / User Password These two options set the system password. Supervisor Password sets a password that will be used to protect the system and Setup utility. User Password sets a password that will be used exclusively on the system. To spec...
Chapter 3 BIOS Configuration CI5VGM User’s Manual 63 IDE HDD Auto Detection This option detects the parameters of an IDE hard disk drive, and automatically enters them into the Standard CMOS Setup screen. ROM PCI/ISA BIOS STANDARD CMOS SETUP AW ARD SOFTW ARE, INC. HARD DISKS TYPE SIZE CYLS HEAD PREC...
Chapter 3 BIOS Configuration 64 CI5VGM User’s Manual Save & Exit Setup This option allows you to determine whether or not to accept the modifications. If you type “Y”, you will quit the setup utility and save all changes into the CMOS memory. If you type “N”, you will return to Setup utility. RO...
Chapter 4 Audio Driver Installation Guide 66 CI5VGM User’s Manual Installing the Audio Drivers for Windows 95 Step 1. After installing Windows 95, insert the CD or audio drivers floppy disk that comes with your motherboard in the CD-ROM or floppy disk drive (labeled YAMAHA Audio YMF715 Windows 95 Dr...
Chapter 4 Audio Driver Installation Guide 68 CI5VGM User’s Manual Step 5. The Update Device Driver Wizard will find YAMAHA OPL3-SAx Sound System and show the following figure. Click Finish . Step 6. When the Opl3sa.drv on OPL3-SAx driver could not be found, type the driver location as d:\sound\ya715...
Chapter 4 Audio Driver Installation Guide CI5VGM User’s Manual 69 Step 7. When file copying is done and the figure below appears, insert the Windows 95 CD into the CD-ROM, and then click OK . Step 8. When the driver installation is finished, continue to install the YSTATION software. Press Start → R...
Chapter 4 Audio Driver Installation Guide 70 CI5VGM User’s Manual Step 9. When the figure below appears, click Typical , and then continue the installation by following Install Wizard. It is recommended that the default settings assigned by the Install Wizard be applied during the first time install...
Chapter 4 Audio Driver Installation Guide CI5VGM User’s Manual 71 Setting the 3D Function Step 1. Click Start in the task bar, and then select Settings . Click Control Panel .
Chapter 4 Audio Driver Installation Guide 72 CI5VGM User’s Manual Step 2. Double click the OPL3-SAx Config icon. Step 3. Move Ymersion slide bar to adjust the 3D effects.
Chapter 4 Audio Driver Installation Guide CI5VGM User’s Manual 73 Using YAMAHA Software Wavetable for Windows 95 The audio driver includes the YAMAHA Soft GM software. After finishing the audio driver installation, you can use this software to change some settings for better MIDI sound quality. Step...
Chapter 4 Audio Driver Installation Guide 74 CI5VGM User’s Manual Step 2. In the Control Panel window, double click the Multimedia icon.
Chapter 4 Audio Driver Installation Guide CI5VGM User’s Manual 75 Step 3. When the window below appears, choose the MIDI tab. Three items are shown. These items are: • OPL3-SA FM Synthesizer Select OPL3 FM synthesizer. • OPL3-SA MPU401 Select Hardware Wavetable . • OPL3-SA SoftSynth Select Soft GM (...
Chapter 4 Audio Driver Installation Guide 76 CI5VGM User’s Manual Installing the Audio Drivers for Windows NT 4.0 Step 1. Before installing the audio drivers for Windows NT 4.0, you must first install the file pnpisa.inf . This file can be found in the Windows NT 4.0 CD or the Service Pack3 CD. It i...
Chapter 5 VGA Driver Installation Guide 78 CI5VGM User’s Manual Installing Trident 9520/25 Drivers for Windows 95 Step 1. In the Windows 95 screen, click Start . Select Settings , then click the Control Panel icon.
Chapter 5 VGA Driver Installation Guide CI5VGM User’s Manual 81 Step 4. Click Have Disk ... . If "D:" is your CDROM, type D:\VGA\Trid9520\W IN95 and click OK . If you are using the floppy disk labeled Trident 9520/25 VGA Driver W indows 95/98 , type A:\ and click OK .
Chapter 5 VGA Driver Installation Guide 82 CI5VGM User’s Manual Step 5. Select Trident Cyber 9520/25 PCI/AGP (VX.XX.XXXX.95) , then click OK .
Chapter 5 VGA Driver Installation Guide CI5VGM User’s Manual 83 Step 6. After the files are copied, click Close . Step 7. Click Yes to restart your computer and for the new settings to
Chapter 5 VGA Driver Installation Guide CI5VGM User’s Manual 91 Step 9. Click Have Disk ... . Step 10. If "D:" is your CDROM, type D:\VGA\Trid9520\W IN98 , If you are using the floppy disk labeled Trident 9520/25 VGA Driver W indows 95/98 , type A:\ and click OK .
Chapter 5 VGA Driver Installation Guide 96 CI5VGM User’s Manual Installing Trident 9520/25 Drivers for Windows NT 4.0 IMPORTANT: You should install the Windows NT 4.0 Service Pack 3 first before installing the Trident 9520/25 VGA drivers. If you don't have the Windows NT 4.0 Service Pack 3, please c...
Chapter 6 System Monitor Utility 104 CI5VGM User’s Manual 8. Setting - sets the values at which an alarm is sounded. Voltage : the acceptable voltage range between the "MAX" and "MIN" value. Temperature : temperature threshold. Fan Rotation Speed : the minimum rotation speed. NOTE: I...
Chapter 7 LANDesk Client Manager CI5VGM User’s Manual 105 7 LANDesk Client Manager This chapter gives a brief introduction to the optional LANDesk Client Manager (LDCM) utility, as well as the installation procedures. The following items are covered in this chapter: Introduction .....................
Chapter 7 LANDesk Client Manager 106 CI5VGM User’s Manual Introduction LANDesk Client Manager provides the capability for managing components (network interface cards, memory, printers, software applications, etc.) within a PC system. It uses the Desktop Management Interface (DMI) standard establish...
Chapter 7 LANDesk Client Manager CI5VGM User’s Manual 107 Installation The optional LANDesk utility that comes with the CPU card runs in Windows NT or Windows 95 operating system. Upon entering the Windows NT 4.0 or Windows 95 environment, insert the CD. Windows will autorun the installation program...
Chapter 7 LANDesk Client Manager 108 CI5VGM User’s Manual Installing the Local Version of LDCM Double Click on ‘LANDesk Client Manager’ in the initial screen and the following screen will appear. Double click on the local version of LANDesk Client Manager. When the Welcome screen appears, click on “...
Chapter 7 LANDesk Client Manager CI5VGM User’s Manual 109 Choose the directory location where Setup will install LANDesk Client Manager. Click “Browse” if you want to change the directory suggested. Otherwise, click “Next” to start installing LDCM. When Setup is finished, changes will have been made...
Chapter 7 LANDesk Client Manager 110 CI5VGM User’s Manual Installing the Administrative Version of LDCM After double clicking on ‘LANDesk Client Manager’ in the initial screen, select the administrative version of the LDCM and the Welcome screen below will appear. Click on “Next” to continue. The sc...
Chapter 7 LANDesk Client Manager 112 CI5VGM User’s Manual This page is intentionally left blank.
Chapter 8 Ethernet Setup User’s Guide 114 CI5VGM User’s Manual Introduction Intel 82558B is a 32-bit 10/100MBps Ethernet controller for PCI local bus-compliant PCs. It supports the bus mastering architecture, and Auto-negotiation feature which make it possible to combine one common type of Ethernet ...
Chapter 8 Ethernet Setup User’s Guide CI5VGM User’s Manual 115 LAN Driver Installation for Windows 95 The CI5VGM comes with a diskette labeled Intel 82558B LAN W indows 95/98 & W indows NT 4.0 Drivers that is to be used in conjunction with the LAN drivers installation. You must use the correct d...
Chapter 8 Ethernet Setup User’s Guide 116 CI5VGM User’s Manual 2. Click System . 3. Click Device Manager .
Chapter 8 Ethernet Setup User’s Guide CI5VGM User’s Manual 117 4. Expand Other Devices . 5. Select PCI Ethernet Controller , then click Properties . [
Chapter 8 Ethernet Setup User’s Guide 118 CI5VGM User’s Manual 6. Click Driver . [ 1.
Chapter 8 Ethernet Setup User’s Guide CI5VGM User’s Manual 119 7. Click Update Driver .
Chapter 8 Ethernet Setup User’s Guide 120 CI5VGM User’s Manual 8. Insert the diskette labeled Intel 82558B LAN W indows 95/98 & W indows NT 4.0 Drivers into the floppy disk drive, then click Next . 9. Click Finish . Ensure the updated driver mentioned is for Intel 82558 Fast Ethernet.
Chapter 8 Ethernet Setup User’s Guide 122 CI5VGM User’s Manual 13. Type the Computer Name and Workgroup , then click Close . 14. Insert the Windows 95 CD ROM , then click OK .
Chapter 8 Ethernet Setup User’s Guide 124 CI5VGM User’s Manual LAN Driver Installation for Windows NT 4.0 The CI5VGM comes with a diskette labeled Intel 82558B LAN W indows 95/98 & W indows NT 4.0 Drivers that is to be used in conjunction of the LAN drivers installation. Follow the steps below t...
Chapter 8 Ethernet Setup User’s Guide CI5VGM User’s Manual 125 Running Diagnostics The CI5VGM comes with a diskette containing the diagnostic software supporting the Intel 82558B Ethernet controller. Follow the steps below to use the Setup Utility . 1. Run the file SETUP.EXE typing a:\setup in the D...
Chapter 8 Ethernet Setup User’s Guide 126 CI5VGM User’s Manual 3. Selecting Test adapter will show the following screen. 8255x-based PCI EtherExpress™ adapter Setup V4.16 Test adapter Bus=0 Dev=0Bh Slot=11 Addr=004063001000 IRQ=10 Diagnostic tests: Adapter tests ……………………………. Passed Onboard loopback ...
Chapter 8 Ethernet Setup User’s Guide CI5VGM User’s Manual 127 5. Upon selecting Others under the Install network drivers main menu screen, the following screen will appear. 8255x-based PCI EtherExpress™ adapter Setup V4.16 Other 1. LANtastic 6.0 2. Banyan 6.00 NDIS workstation 3. NDIS 2.x driver no...
Appendix 128 CI5VGM User’s Manual Appendix A. I/O Port Address Map B. Interrupt Request Lines (IRQ)
Appendix 130 CI5VGM User’s Manual B. Interrupt Request Lines (IRQ) There are a total of 15 IRQ lines available on the Industrial CPU Card. Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on the Industrial CP...
IBM Manuals
-
IBM SC41-5210-04
Manual
-
IBM TM7
Manual
-
IBM 8677
Manual
-
IBM EM78P809N
Manual
-
IBM 610
Manual
-
IBM AIX 4.3
Manual
-
IBM 8128
Manual
-
IBM PANEL1173-841
Manual
-
IBM L150
Manual
-
IBM E50
Manual
-
IBM 8319
Manual
-
IBM DS3300
Manual
-
IBM 9519-AG1
Manual
-
IBM 6.00E+04
Manual
-
IBM PD78082(A)
Manual
-
IBM S544-5343-03
Manual
-
IBM PPC-1510PT
Manual
-
IBM 37L1388
Manual
-
IBM V2.3
Manual
-
IBM DS4500
Manual