IBM 31P8128 - Manuals

About this book This guide contains information about the IBM « Data Migration Kit. The guide is divided into two parts: Part 1: Installation and user ’s guide This section contains the product description, installation, and operatinginstructions and is translated into the following languages: v Fre...

Installation and user’s guide This guide contains the product description, hardware and software installationinstructions, and product use information. Note: Check the IBM Support Web site for additional tips on using this optionat: http://www.ibm.com/pc/support. Product description The IBM Data Mig...

You can perform the data-migration process between two computers withWindows operating systems. The computers can have different operatingsystems; however, not all Windows operating-system combinations aresupported. See “Supported operating-system combinations”. Supported operating-system combinatio...

v Ethernet adapter Previous computer: v Pentium-class microprocessor or later v Windows XP Professional, Windows XP Home Edition, Windows 2000,Windows Me, Windows 98 SE, Windows 98, Windows 95 v For migration to Windows XP only, a diskette drive in or that can beconnected to the old computer or a Wi...

4. Start the Files and Transfer Settings wizard on the new computer. 5. Create a wizard diskette (if not using a Windows XP CD). 6. Install the Files and Settings Transfer wizard on your previous computerusing the Wizard diskette or a Windows XP CD. 7. Run the Files and settings Transfer wizard on y...

3. Remove the cover bracket from a PCI slot by removing the screw thatsecures it. 4. Insert the PCI Ethernet adapter into a PCI slot as shown in the illustration,and push it into the slot until it is firmly seated. Secure the adapter bracketwith the screw that you removed in step 3. Your adapter slo...

3. Insert the Ethernet PC Card into an available PC Card slot in your mobilecomputer, as shown in the following illustration. If you are unsure about the location of the PC Card slot, refer to yourmobile computer documentation. Installing the Ethernet PC Card adapter device drivers in amobile comput...

6. Click Next again to install the device driver that is displayed. 7. Click Finish . 8. Restart the computer. 9. Proceed to “Connecting the computers”. Windows 95 Follow this procedure to install the Ethernet PC Card adapter device drivers inWindows 95: 1. If it is not already running, start Window...

The following illustration provides an example of two computers connected. Note: This illustration represents a unique configuration. Your configurationmight vary. For example, you might have two mobile computers or twodesktop computers. The PCI or PC Card slots and Ethernet ports mightbe in differe...

Windows 2000 c:\Documents and settings\ username \My Documents c:\WINNT40\Profiles\ username \personal Windows Me, Windows 98, or Windows 95 c:\Windows\Profiles\ username \My Documents 2. If you are migrating the My Documents folder from a computer that hasmultiple users and you will want to use the...

5. The InstallShield Wizard window opens. Click Next . 6. In the Setup Configuration window, select New Computer, and click Next. 1-14 IBM Data Migration Kit: User ’s Guide

7. In the Setup Configuration window, select I already have the IBM Data Transfer program installed, and click Next. Installation and user ’s guide 1-15

9. In the Select Program Folder window, accept the default folder and click Next . The program is then installed on your computer. 10. In the InstallShield Wizard Complete window, ensure that the Start IBMData Transfer now check box is selected; then click Finish . v The IBM Data Transfer software s...

11. In the following window, on the new computer, click Next. 1-18 IBM Data Migration Kit: User ’s Guide

12. On the next window, select New computer and click Next . . 13. On the next window, choose your transfer options, selecting the settingsyou want to transfer. Read the description below each selection forinformation on what will be transferred. For each item selected, a windowwill open with additi...

computers. Click OK . v If Folder contents is selected, the following window will open. Pleasenote that any files that are transferred from the old computer willreplace any files on the new computer that have the same name andsame path. For example, if you transfer a folder with the pathC:\Pictures ...

14. Click Next after you have made your selections. 15. In the next window, select Across a network connection . Click Next . Installation and user ’s guide 1-21

16. The following window displays the items you have selected to transfer.Click Next . 17. If not already installed, network support will need to be added to yournew computer. Use the following instructions for the operating system onyour new computer, to check and add network support. Windows 2000 ...

Windows 95, Windows 98 and Windows Me a. If network support needs to be installed on your new computer, youwill see the following window open. Note: If you do not see this window, proceed to step 18. Networksupport is already installed. b. Click Yes and network support will be installed. Click Yes t...

Note: When Windows is installing network support, you might beprompted to insert your operating system disk. If so, insert theoperating system disk and click OK . Note: When Windows is installing network support, you might seeseveral version conflict windows. If any of these windows open,click OK on...

previous computer setup. Click OK . 19. The following window will display instructing you to go to your previouscomputer. Do not click Next at this time. Proceed to your previous Installation and user ’s guide 1-27

6. In the Setup Configuration window, select Previous Computer and then click Next . 7. In the Setup Configuration window, select I already have the IBM Data Transfer program installed , and then click Next . 1-30 IBM Data Migration Kit: User ’s Guide

new computer), and click Next . 13. If not already installed, network support will need to be added to yourprevious computer. To check and add network support, follow theinstructions below, underneath the operating system on your previouscomputer. Windows 2000 a. The Network and Dial-up Connections ...

Windows 95, Windows 98 and Windows Me a. If network support needs to be installed on your previous computer,you will see the following window open. Note: If you do not see this window, proceed to step 16. Networksupport is already installed. b. Click Yes and network support will be installed. Click ...

Note: When Windows is installing Network support, you may see severalVersion Conflict windows. If any of these windows open, click Yes on each one to keep the existing file. 14. When Windows restarts the application takes you back to this window.Click Next . Note: If this window does not display whe...

computer) and then click Next . 16. A window will display the items that you have selected to transfer. Click Next . Note: If the following window does not open and an error windowopens, your previous computer cannot connect to your newcomputer. Follow the instructions in the error window to correct...

troubleshooting tips, see “Troubleshooting” on page A-1. 17. The next window allows you to select the folders that will be transferred.Type a folder path in the first box and click Add or click Browse to look for the folders. 18. If you clicked browse, a window will display to allow you to select af...

Note: The IBM Data Transfer software cannot be used to migrate softwareapplications, only data files. 20. On the next window click Next . 21. The program will begin the transfer. This process could take a whiledepending on how much data is being transferred. Let the process runand do not run other p...

Note: Your previous computer must have free hard space equal to theamount of data that will be transferred at one time. If you want totransfer larger quantities of data, you could perform severaltransfers. To check hard drive free space, double-click the My Computer icon , right-click on the hard dr...

cable from the Ethernet port on the previous computer. 23. Move back to the new computer and see “Continuing the data migrationprocess on the new computer” on page 1-45. 1-44 IBM Data Migration Kit: User ’s Guide

Continuing the data migration process on the new computer 1. On your new computer the following window should still be open. Click Next to proceed with the transfer process. Installation and user ’s guide 1-45

2. Click Next on the following window. 3. A window with a box will display copying data. Please wait. The programwill finish the transfer. This process could take a while depending on howmuch data is being transferred. Do not run other programs while it is 1-46 IBM Data Migration Kit: User ’s Guide

4. When the transfer is complete, the following window displays. Click Finish . The new computer will restart. 5. Check to make sure that file and print sharing are disabled. Disable them ifthey are not. For more information on how to check and disable file andprint sharing see Appendix A. Troublesh...

Migrating data to a computer running Windows XP At this point your new and old computer should have an Ethernet adapterinstalled and they should be connected with the crossover cable included inthe kit. Follow the instructions in this section to perform the data migration toWindows XP. To migrate to...

v If the previous computer is running Windows XP or Windows 2000, logon toyour previous computer with a user name that is part of the Administratorsgroup. v For more information on logging on to your computer, see “Supplementalinstructions” on page A-3. To perform the migration to Windows XP, you wi...

Windows Me and Windows 98 1. Click Start -> Settings -> Control Panel . 2. Double-click Network. 3. The Network window opens. On the Configuration tab in the Network window a box will display the installed network components. Select TCP/IP - Intel pro/100 S Desktop Adapter if you installed the...

Note: If you already have an Ethernet adapter installed in your oldcomputer select the TCP/IP component that corresponds to theexisting Ethernet adapter. 4. Click Properties then select the IP address tab. 5. Select Specify an IP Address . For the IP Address box type 192.168.1.2 then type 255.255.25...

6. Select the DNS configuration tab, select disable DNS and then click OK . 7. Restart your computer. Beginning the data migration to Windows XP (from all supportedoperating systems) Before performing the migration, read the suggestions in the section below. Suggestions before migration If you are m...

Follow the instructions below to begin the data migration to Windows XP.These instructions should be used if your previous computer ’s operatingsystem is Windows XP, Windows 2000, Windows Me, Windows 98, orWindows 95. You should have already configured your IP and DNS settings inthe above section. 1...

5. Insert a blank formatted diskette into the diskette drive on your newcomputer and click Next . The Wizard disk is created. 6. The Now go to your old computer window opens. Do not click Next . Move to the previous computer and insert the Wizard disk into the Installation and user ’s guide 1-57

diskette drive. 7. On your previous computer click Start and select Run . Type a:\fastwiz and then click OK . 8. The Files and Settings Transfer Wizard opens. (Files from your Wizarddisk are now being copied to your computer). 1-58 IBM Data Migration Kit: User ’s Guide

9. On your previous computer, the Welcome to the Files and SettingsTransfer Wizard window opens. Click Next . 10. At the next window select Home or small office network and then click Next . Note: If the Home or small office network selection is not available as anoption, then your computers cannot ...

option is for advanced users. 12. The Files and Settings Transfer Wizard begins collecting the files andsettings on your old computer. 13. On your new computer a password is displayed. You will be prompted toenter that password on your old computer. Go to your old computer andtype in the password th...

Migrating to Windows XP using a Windows XP CD 1. On your new computer at this window ensure I will use the wizard from the Windows XP CD is selected. Click Next . Installation and user ’s guide 1-63

2. The Now go to your old computer window opens. Move to the previouscomputer and insert the Windows XP CD into the CD-ROM or DVD drive. 3. On the previous computer the following menu will appear from the CD.Click Perform additional tasks . Note: If this menu does not automatically run when the CD i...

computer. Click OK . 4. At the next window click Transfer files and settings . Installation and user ’s guide 1-65

12. On your old computer, click Exit in the Welcome to Microsoft Windows XP window. Installation and user ’s guide 1-69

13. On your new computer the Completing the Files and Settings TransferWizard window opens. Click Finish . 14. On your new computer you will be prompted to log off for changes totake effect. Click Yes . 15. The Files and Settings Transfer Wizard is complete. Proceed to“Suggestions after migration” f...

Appendix A. Troubleshooting, hints, and tips The following section describes troubleshooting assistance. Troubleshooting If you have problems performing the data migration, refer to the followingtroubleshooting instructions for assistance. If you receive an error message andhave problems performing ...

instructions under Windows XP for your Windows XP machine to setthe IP addresses and DNS configuration. Try the migration processagain. f. Reboot both computers and try the migration again. Supplemental instructions Refer to the contents of this section for additional instructions related toperformi...

that you know the password for and that are part of the Administratorsgroup, contact your administrator to either get the Administrator user namepassword or to have your user name added to the Administrators group. Windows Me and Windows 98 1. Click Start , then Log Off user, where user is the user ...

2. Press Control+Alt+Delete on the keyboard. 3. In the Windows Security window, click the Change Password... button. 4. In the Change Password window, enter the current password for that userin the Old Password box. 5. Enter the new password in the New password box and then enter the newpassword aga...

3. In the box underneath ″ Components checked are used by this connection ″ on the connection properties window, de-select File and Printer Sharing for Microsoft Networks if not already unchecked. 4. Click OK and the connection properties window will close. Windows Me, Windows 98, and Windows 95 1. ...

Appendix B. Warranty information This section contains the warranty period for your product, information aboutobtaining warranty service and support, and the IBM Statement of LimitedWarranty. Warranty period Contact your place of purchase for warranty service information. Some IBMMachines are eligib...

During the warranty period, assistance for replacement or exchange ofdefective components is available. In addition, if your IBM option is installedin an IBM computer, you might be entitled to service at your location. Yourtechnical support representative can help you determine the best alternative....

IBM Statement of Limited Warranty Z125-4753-06 8/2000 This warranty statement consists of two parts: Part 1 and Part 2. Be sure toread Part 1 and the country-unique terms in Part 2 that apply to your countryor region. Part 1 - General Terms This Statement of Limited Warranty includes Part 1 - Genera...

assumes the warranty service status of the replaced item. Many features,conversions, or upgrades involve the removal of parts and their return to IBM.A part that replaces a removed part will assume the warranty service status ofthe removed part. Before IBM or your reseller exchanges a Machine or par...

Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first sentence: laws of the State of New York. ASIA PACIFIC AUSTRALIA The IBM Warranty for Machines: The following paragraph is added to this Section: The warranties specified in this Section are in ...

Limitation of Liability: The following is added to this Section: Where Machines are not acquired for the purposes of a business as defined in the ConsumerGuarantees Act 1993, the limitations in this Section are subject to thelimitations in that Act. PEOPLE’S REPUBLIC OF CHINA (PRC) Governing Law: Th...

Yugoslavia, Former Yugoslav Republic of Macedonia (FYROM), Moldova,Poland, Romania, Russia, Slovak Republic, Slovenia, or Ukraine, you mayobtain warranty service for that Machine in any of those countries from either(1) an IBM reseller approved to perform warranty service or (2) from IBM. If you pur...

Limitation of Liability: The following replaces items 1 and 2 of the first paragraph of this Section: 1. death or personal injury or physical damage to your real property solelycaused by IBM’s negligence; 2. the amount of any other actual direct damages or loss, up to 125 percent ofthe charges (if r...

Appendix C. Notices This section contains information on notices. Any references in this publication to non-IBM Web sites are provided forconvenience only and do not in any manner serve as an endorsement of thoseWeb sites. The materials at those Web sites are not part of the materials for thisIBM pr...

Microsoft and Windows are trademarks of Microsoft Corporation in the UnitedStates, other countries, or both. Windows XP screen shots reprinted by permission from Microsoft Corporation. Intel is a trademark of the Intel Corporation in the United States, othercountries or both. Other company, product,...

Responsible party: International Business Machines CorporationNew Orchard RoadArmonk, NY 10504Telephone: 1-919-543-2193 Tested To ComplyWith FCC Standards FOR HOME OR OFFICE USE Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003. Avis...

Este producto ha sido probado y satisface los límites para Equipos InformáticosClase B de conformidad con el Estándar Europeo EN 55022. Los límites paralos equipos de Clase B se han establecido para entornos residenciales típicos afin de proporcionar una protección razonable contra las interferencia...