Hyundai H-CDM8043 - Manuals

Page 2 - Table of contents

2 Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefullybefore connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents .....................................

Page 3 - Important safeguards

3 Important safeguards Using the device at temperature below -10º may cause the breakage of the device. BEFORE USINGPLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDEDTEMPERATURE!Read carefully through this manual to familiarize yourself with this high-quality sound system.Disconnect the veh...

Page 4 - Installation/ connection; Removing the unit

4 Installation/ connection Attention: REMOVE THE TRANSPORT CD STOPPER (2 SCREWS)BEFORE USE. Din front-mount (method 1) After inserting the holder into the dashboard, select the appropriatetab and bend them inwards to secure the holder in place.Insert fingers into the groove in the front of frame and...

Page 6 - Detachable control panel; Detaching the control panel; Insert the right side of the control panel into the main unit.

6 Detachable control panel Detaching the control panel Turn the Power off.Press the panel release button REL.Remove the control panel. Attaching the control panel Insert the right side of the control panel into the main unit. Note: the control panel must be attached into the T-Joint. Press the contr...

Page 7 - Electrical connection

Page 8 - Using the ISO Connector; Location

8 Do not interchange the connection of the wiring!!!For some car models you may need to modify wiring of the supplied power cord. Contact your authorized cardealer before installing this unit. Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISOconnectors a...

Page 9 - Panel controls; Front panel; Press it to detach the front panel.

9 Panel controls Front panel 1. REL button Press it to detach the front panel. 2. EJECT button Press it to eject the disc. 3. PREVIOUS / NEXT buttons Use these buttons to search for the beginnings of the next/ previous tracks or automatic skip forward/backward or automatic/ manual seek tuning.

Page 12 - Back of the front panel; Press the REL button to open the panel.

12 Back of the front panel Press the REL button to open the panel. Note: Pressing the RESET hole will erase the clock setting and stored stations. Panel status indicator lights up when you slide the panel down; flashes when you remove the panel. Disc slot Reset hole Panel status indicator

Page 13 - General operation; Reset the unit; POWER; Volume control; Volume adjust; Rotate the VOLUME knob on the panel to adjust the volume level.; Setting the sound characteristics

13 General operation Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit.Press REL button on the panel to open the panel and press the RESET hole with a point object to restore the unitto the original factory settings. Power button Press a...

Page 14 - Setting other characteristics; Rotate the VOLUME knob to select the desired mode:

14 Setting other characteristics During FM mode, keep pressing and holding for more than 2 seconds the SEL button to turn the setting TA on,then press it shortly and repeatedly to select other settings: PI, RETUNE, MASK, BEEP, SEEK, DSP, LOUD,STEREO, DX/LOCAL, VOL. a. TA (Traffic Announcement) mode ...

Page 17 - In case of receiving a RDS station: PS NAME; Setting the time

17 Turning the sound off Press the MU button to turn the sound off. Press it again or press the MODE, BAND, rotate VOLUME knob,press the SEL button to turn the sound on. Mode setting Press the MOD button to select RADIO, DISC, CARD (after inserting the SD/ MMC card), USB (after insertingthe USB card...

Page 18 - Digital tuner; Band selection; Manual tuning: press the; Programming tuner stations; buttons

18 Digital tuner Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press POWER to power on, then press the MOD button to select RADIO.Press BND once or mo...

Page 19 - Scan function; REGION OFF: PI code and covered area will not be searched.

19 A.P function (Auto storage/ Preset memory scan) Preset scan: press A.P button for less than 1 second to scan all preset stations in the memories of the currentband and stay on each memory stations for about 5 seconds. The memory location indicator on the LCDwill flash during the process. To stop ...

Page 20 - time to switch the PTY function off.

20 PTY (Program Type) function Press PTY the first time, then press the number buttons, you can select the music program style.Press PTY the second time, then press the number buttons, you can select the language program style.To choose the desired program style use the following table: When PTY is ...

Page 21 - TA interruption function:; mode will not be off.

21 If volume is adjusted during traffic announcement, only the traffic announcement volume is valid. TA interruption function: the current traffic announcement is cancelled by pressing the TA key. But the TA mode will not be off. Note: When TA is on, SEEK, (SCAN), AUTO MEMORY function can be receive...

Page 22 - Loading a disc; mode will be changed into the mode of the latter one.

22 CD/ SD/ MMC/ USB operations Loading a disc 1. Insert the disc with the printed side facing upward into the slot.2. Press EJECT button to eject the disc. Inserting the SD/ MMC card/ USB device Insert the MMC/ SD card or USB device into MMC/ SD compartment or USB socket. Then the playing modewill b...

Page 23 - Playing the previous/ next track; During playback press; Scanning forward and backward; Press the

23 Note:USB format supports 2.0. Capacity: 8 MB ~ 512 MB. SD cards brands: Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc. Capacity: 8 MB ~ 512 MB. MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc. Capacity: 16 MB ~ 512 MB. Playing/ ...

Page 24 - Repeat playing; Random playback; Press it again to cancel the function.; Intro play; to start intro play of

24 Repeat playing 1. During the SD/ MMC/ USB playback press the RPT button to repeat current track. The display shows M-RPT. 2. During the CD/ MP3/ WMA playback press the RPT button to repeat the current track. The display shows S-RPT. 3. During any playback press and hold it for 2 seconds to repeat...

Page 25 - Inserting the number of track; or; Search function; Track search; number of the flashing digit.

25 3. During any playback press and hold it for 2 seconds to start intro play of the tracks in current folder. The display shows D-INT. 4. Press it again to cancel the function. Inserting the number of track 1. Press the number buttons to input the desired tracks.2. Use the 5 button to go backward t...

Page 26 - MP3 overview

26 Directory search In DIRECTORY SEARCH mode of MMC/ SD, USB or MP3/ WMA disc, the LCD will displa y the root folder (ifthere is not the root folder, it will found a root folder named ROOT).1. Rotate VOLUME knob to select your desired folder.2. Press the or button to select your desired track in the...

Page 27 - Notes on creating your own CD-R or CD-RW containing MP3 files:

27 Maximum number of directory level is 8, including the root directory. Maximum number of files and foldersper disc is 256.The unit may not play tracks in the order of Track numbers.The unit plays only the audio tracks if a disc contains both audio tracks and MP3 files.When playing a disc of 8 kbps...

Page 29 - Cleaning the cabinet

29 Handling discs Dirty, scratched or warped discs may cause skip ping or noise.Handle the disc only by the edges. To keep clean do not touch its surface.Discs should be stored in their cases after use to avoid scratches.Do not expose discs to direct sunlight, high humidity, high temperature or dust...

Page 30 - Troubleshooting guide; Symptom

30 Troubleshooting guide Symptom Cause Solution GeneralNo power The car ignition is not on. The fuse is blown. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. Replace the fuse. DiscDisc cannot be loaded. Presence of disc inside the player. Remove the ...

Page 31 - Specification; General; Maximum power output:; FM Stereo Radio; Preset memory stations:; MW section

31 The radio does not work, the radio station automatic selection does not work. The antenna cable is not connected the signals are too weak. Insert the antenna cable firmly select a station manually. Specification Specifications are subject to change without notice. Mass and dimension are approxima...

Page 34 - CD

34 . / : CD . , , , . 1. 2. (5 ) 3. 4. (5 x 25 ) 5. 6. 7. . ( .) , , , , .

Page 38 - ISO

38 !!! . . ISO 1. ISO, , . 2. ISO , . , . A B 1 (+)--- 2 (-)--- 3 (+)--- 4 12 (+)/ (-)--- 5 / (+)--- 6 ((-)--- 7 ACC+/ (+)--- 8 (-)---

Page 48 - RDS

48 : RDS ( ) . , RDS , . POWER, . MOD, RADIO. BND, : FM1, FM2, FM3, AM1, AM2. / : / , , . : / , . , . , . 6 3 . : - ( ). - / . - 1~6, . : - ( ). - 1~6.

Page 51 - LOCAL

51 TA ( ) : , . “ ”. . TA SEEK. - CD/ SD/ MMC/ USB . - , . : 20, 20. 20, . , , . , . : , . . EON-TA LOCAL/ EON-TA DISTANCE: , , , , . . , . 2 : LOCAL DISTANTCE. - EON-TA LOCAL: : EON TA LO. - EON-TA DISTANCE: : EON TA LO. : : DISTANCE. LOCAL .

Page 54 - Intro

54 1. SD/ MMC/ USB R , . M-RPT. 2. CD/ MP3/ WMA R , . S-RPT. 3. R , . D-RPT. 4. , . 1. SD/ MMC/ USB RDM, . M-RDM. 2. CD/ MP3/ WMA RDM, . S-RDM. 3. RDM, . D-RDM. 4. , . Intro 10 . 1. SD/ MMC/ USB INT, . M-INT. 2. CD/ MP3/ WMA INT, . S- INT.

Page 56 - MPEG 3

56 3. , SEL, . (Directory search) ( , “ROOT” ( ). 1. , . 2. , . 3. SEL, . (Character search) MP3/ WMA : “ --……”. , , . NON ( ). , . , , . SEL, . 3 3: 3 MPEG 3 . 3 CD-ROM, CD-R CD-RW. 3, , ISO 9660. 3, . 3, , “.mp3”.

Page 63 - DSP

63 . . : 12 , : 10 / 10 : 50 4 ( ): 218 83 285 : -10º - +60º FM : 87.5 - 108.0 / : 3 / 10.7 30 MW : 522-1620 : 2 RMS (+/-3 ) : 10 – 20 (A-vtd): 50 DSP Classic, Pop, Rock, FlatCD . 2000