Hyundai H-CDM8019 - Manuals

6 Installation/Connections First complete the electrical connections, and then check them for correctness. If you are not confident working withelectrical wiring, removing and reinstalling interior panels, carpeting, dashboards or other components of yourvehicle, please call your dealer in order to ...

7 Installation method A WARNING: Disconnect negative battery terminal from battery before starting installation. Consult the vehicle’s owner ’s manual for proper instructions. 1. After removing the old unit and mounting sleeve, insert supplied mounting sleeve in the opening.2. Bend the tabs on the m...

8 Installation method B Note: Outer trim frame, hook, and mounting sleeve are not used for this installation.This is only intended as a general guide; contact the vehicle'smanufacturer for specific instructions.This method of installation uses the screw holes at the sides ofthe unit and the holes of...

9 Detaching the front panel Press RELEASE button to remove the panel. Attaching the control panel Insert the left side of the control panel into the main unit. Press the control panel on to the right side of middle of ituntil a “click” sound is heard. Caution: Do not insert the control panel from th...

10 Electrical connections Speaker Wiring Notes Follow the above wiring diagram to install the head unit with new or existing speakers. This unit is designed for use with four (4) speakers with the impedance between 4 Ohms to 8 Ohms.An impedance load of less than 4 Ohms could damage the unit.Never br...

11 Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit.Cut the...

12 Panel controls Front panel 1. NEXT/PREV button2. CLK button3. RELEASE button4. MOD button5. LUD button6. MUT button7. 1/PAU button8. 2/INT button9. 3/RPT button10. 4/RDM button11. 5/DN10 button 16. MON button 12. 6/UP10 button 17. F/PS button 13. EJECT button 18. VOL knob 14. D slot 19. BND butto...

13 General operations Turning On/Off Press any button to turn the unit on, the display will show a message “WELCOME” to indicate it is ready to use.Press and hold POWER button to turn the unit off. Mode selection Press MOD button to switch between AUX, Radio and CD play mode. Volume control The volu...

15 Radio operations Choose Radio Band Press BND button to activate the Radio mode (even when CD is playing). The unit is equipped with 3 FM bands(FM1, FM2 and FM3) and 2 MW bands (MW1 and MW2). Each of the bands can store up to 6 preset stations,making total 30 preset memory stations. Radio Tune/See...

17 CD/MP3 operations Electronic Shock Protection (ESP) The electronic shock protection is ideal for driving uneven road. For MP3 discs Electronic Skip Protection for MP3 discs is a default feature. Please note that this feature supports the CDs withsongs encoded by 96 Kb/s and 32000 Hz. For songs en...

18 Press F/PS button and the displa y will show “TRK SCH”. At this moment, press VOL knob so that “TRK” will blinkon the display. Then rotate the knob to choose your desired track and press the knob again to confirm the selection.The selected track will be searched and play. File search Press F/PS b...

20 MP3 Overview Notes on MP3 MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the ...

21 Handling discs Dirty, scratched or warped discs may cause skip ping or noise.Handle the disc only by the edges. To keep clean do not touch its surface.Discs should be stored in their cases after use to avoid scratches.Do not expose discs to direct sunlight, high humidity, high temperature or dust...

22 Troubleshooting guide Symptom Cause Solution GeneralNo power The car ignition is not on. The fuse is blown. If the power supply is properly connected to thecar accessory switch the ignition key to “ACC”.Replace the fuse. DiscDisc cannot be loaded. Presence of disc inside the player. Remove the di...

23 Specification General Power supply: 12V DC Fuse: 10 A and 1 A Maximum power output: 50W x 4 Dimensions (W x H x D): 178 x 51 x 178 mm ESP function 45 sec. for Audio-CD, 120 sec for MP3 Supported discs CD/CD-R/CD-RW Supported formats CDDA/MP3 FM stereo radio Frequency range: 87.5 – 108.0 MHz Sensi...

24 Instruction manual 13 cm 2 way coaxial acoustic system Description 2 m (x 8) (x 8) The set of acoustic systemincludes:- acoustic system - speaker wire – 2 m - screw – 8 pcs - clip – 8 pcs

25 Important safeguards The owner’s manual contains important operating and maintenance instructions for your safety. It is necessary torefer the manual.Do not install the speakers where they may be subjected to excessive heat moisture, dust or where they will bekicked repeatedly, brushed or bumped....

26 Mounting the speakers Installat ion kits are available fro m your dealer or local stereo shop to help make your installat ion easy. These kitsalso give your installation a clean, custom appearance. Questions about installations methods please consult aprofessional auto sound dealer/installer for ...

27 Securing the speakers Position the speaker into the mounting hole and reconfirm the correct mounting location and hole placement.Screw clips are provided to ensure a snug fit. These should be placed over the metal surface and line up the holeyou have previously drilled with the screw clip. Place ...

28 If unit fails to operate properly Carefully read the instruction to make sure the unit is being operated properly. Check the following before you take your unit to the local dealer for repair. SYMPTOM POSSIBLE CAUSE SOLUTION The volume control regulator set in theminimal position Adjust sound lev...

41 . CLK, CLK 3 , . 1. VOL . 2. VOL . 3. CLK , . CLK, . DSP VOL 2 , DSP OFF. VOL, DSP: POP ROCK CLASSIC FLAT DSP OFF ( ) , . Aux, RCA 1. AUX AUX AUX IN . AUX , , 3 . MOD, AUX. VOL. 2. RCA RCA . , . .

44 D/MP3 (ESP) . MP3 MP3 . , , 96 32000 . , , ESP . CD VOL 2 , «DSP OFF». , «ESP 12», , 12 . , 45 , «ESP 45». , . . , . MP3 , «MP3 DISC». . «ROOT», ID3 , . CD , «LOAD», . EJECT . 5 , . . MP3 MP3 . MP3 .

6 Installation/Connections First complete the electrical connections, and then check them for correctness. If you are not confident working withelectrical wiring, removing and reinstalling interior panels, carpeting, dashboards or other components of yourvehicle, please call your dealer in order to ...

7 Installation method A WARNING: Disconnect negative battery terminal from battery before starting installation. Consult the vehicle’s owner ’s manual for proper instructions. 1. After removing the old unit and mounting sleeve, insert supplied mounting sleeve in the opening.2. Bend the tabs on the m...

8 Installation method B Note: Outer trim frame, hook, and mounting sleeve are not used for this installation.This is only intended as a general guide; contact the vehicle'smanufacturer for specific instructions.This method of installation uses the screw holes at the sides ofthe unit and the holes of...

9 Detaching the front panel Press RELEASE button to remove the panel. Attaching the control panel Insert the left side of the control panel into the main unit. Press the control panel on to the right side of middle of ituntil a “click” sound is heard. Caution: Do not insert the control panel from th...

10 Electrical connections Speaker Wiring Notes Follow the above wiring diagram to install the head unit with new or existing speakers. This unit is designed for use with four (4) speakers with the impedance between 4 Ohms to 8 Ohms.An impedance load of less than 4 Ohms could damage the unit.Never br...

11 Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit.Cut the...

12 Panel controls Front panel 1. NEXT/PREV button2. CLK button3. RELEASE button4. MOD button5. LUD button6. MUT button7. 1/PAU button8. 2/INT button9. 3/RPT button10. 4/RDM button11. 5/DN10 button 16. MON button 12. 6/UP10 button 17. F/PS button 13. EJECT button 18. VOL knob 14. D slot 19. BND butto...

13 General operations Turning On/Off Press any button to turn the unit on, the display will show a message “WELCOME” to indicate it is ready to use.Press and hold POWER button to turn the unit off. Mode selection Press MOD button to switch between AUX, Radio and CD play mode. Volume control The volu...

15 Radio operations Choose Radio Band Press BND button to activate the Radio mode (even when CD is playing). The unit is equipped with 3 FM bands(FM1, FM2 and FM3) and 2 MW bands (MW1 and MW2). Each of the bands can store up to 6 preset stations,making total 30 preset memory stations. Radio Tune/See...

17 CD/MP3 operations Electronic Shock Protection (ESP) The electronic shock protection is ideal for driving uneven road. For MP3 discs Electronic Skip Protection for MP3 discs is a default feature. Please note that this feature supports the CDs withsongs encoded by 96 Kb/s and 32000 Hz. For songs en...

18 Press F/PS button and the displa y will show “TRK SCH”. At this moment, press VOL knob so that “TRK” will blinkon the display. Then rotate the knob to choose your desired track and press the knob again to confirm the selection.The selected track will be searched and play. File search Press F/PS b...

20 MP3 Overview Notes on MP3 MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the ...

21 Handling discs Dirty, scratched or warped discs may cause skip ping or noise.Handle the disc only by the edges. To keep clean do not touch its surface.Discs should be stored in their cases after use to avoid scratches.Do not expose discs to direct sunlight, high humidity, high temperature or dust...

22 Troubleshooting guide Symptom Cause Solution GeneralNo power The car ignition is not on. The fuse is blown. If the power supply is properly connected to thecar accessory switch the ignition key to “ACC”.Replace the fuse. DiscDisc cannot be loaded. Presence of disc inside the player. Remove the di...

23 Specification General Power supply: 12V DC Fuse: 10 A and 1 A Maximum power output: 50W x 4 Dimensions (W x H x D): 178 x 51 x 178 mm ESP function 45 sec. for Audio-CD, 120 sec for MP3 Supported discs CD/CD-R/CD-RW Supported formats CDDA/MP3 FM stereo radio Frequency range: 87.5 – 108.0 MHz Sensi...

24 Instruction manual 13 cm 2 way coaxial acoustic system Description 2 m (x 8) (x 8) The set of acoustic systemincludes:- acoustic system - speaker wire – 2 m - screw – 8 pcs - clip – 8 pcs

25 Important safeguards The owner’s manual contains important operating and maintenance instructions for your safety. It is necessary torefer the manual.Do not install the speakers where they may be subjected to excessive heat moisture, dust or where they will bekicked repeatedly, brushed or bumped....

26 Mounting the speakers Installat ion kits are available fro m your dealer or local stereo shop to help make your installat ion easy. These kitsalso give your installation a clean, custom appearance. Questions about installations methods please consult aprofessional auto sound dealer/installer for ...

27 Securing the speakers Position the speaker into the mounting hole and reconfirm the correct mounting location and hole placement.Screw clips are provided to ensure a snug fit. These should be placed over the metal surface and line up the holeyou have previously drilled with the screw clip. Place ...

28 If unit fails to operate properly Carefully read the instruction to make sure the unit is being operated properly. Check the following before you take your unit to the local dealer for repair. SYMPTOM POSSIBLE CAUSE SOLUTION The volume control regulator set in theminimal position Adjust sound lev...

41 . CLK, CLK 3 , . 1. VOL . 2. VOL . 3. CLK , . CLK, . DSP VOL 2 , DSP OFF. VOL, DSP: POP ROCK CLASSIC FLAT DSP OFF ( ) , . Aux, RCA 1. AUX AUX AUX IN . AUX , , 3 . MOD, AUX. VOL. 2. RCA RCA . , . .

44 D/MP3 (ESP) . MP3 MP3 . , , 96 32000 . , , ESP . CD VOL 2 , «DSP OFF». , «ESP 12», , 12 . , 45 , «ESP 45». , . . , . MP3 , «MP3 DISC». . «ROOT», ID3 , . CD , «LOAD», . EJECT . 5 , . . MP3 MP3 . MP3 .