Hunter 42406-01 - Manuals - manualsarea.com

Page 2 - Table of Contents; Welc om e; Your new Hunter; Cautions and Warnings; • To avoid possible electrical shock, before installing your fan,

2 Hunter Fan Company 42406-01 • 20080926 Table of Contents 1 • Getting Ready ................................................... 4 2 • Installing the Ceiling Plate .......................... 5 3 • Assembling and Hanging the Fan .......... 6 4 • Wiring the Fan ...........................................

Page 3 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Low Profile Mounting; Standard Mounting; Angle Mounting; Understanding Mounting and Installer’s Choice

3 Inst al ler’s Choice and O ptional Ac ce ss orie s Low Profile Mounting fits close to the ceiling, recommended for ceilings less than 8 feet high Standard Mounting hangs from the ceiling by a downrod (included), recommended for ceilings 8 feet or higher Angle Mounting recommended for a vaulted or ...

Page 4 - • Gettin g R eady; To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?

4 Hunter Fan Company 42406-01 • 20080926 1 • Gettin g R eady To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need hel...

Page 5 - Step Title; • Inst al lin g th e C ei lin g Pl at e; To avoid possible electrical shock, before installing your fan,

Step Title 5 Hunter Fan Company 42406-01 • 20080926 2 • Inst al lin g th e C ei lin g Pl at e CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock th...

Page 6 - • A ssemblin g and Han g in g th e Fan; Fan may fall if not assembled as directed in these; For Standard or Angle mounting:; The adapter has a special coating on the threads. Do

6 Hunter Fan Company 42406-01 • 20080926 3 • A ssemblin g and Han g in g th e Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angle mounting: 3-2. To assemble fan to hang down from a flat or angled ceili...

Page 7 - • Wirin g th e Fan; Be sure no bare wire or wire strands are visible after; Single Switch Wiring:; Single Switch Wiring

Step Title 7 Hunter Fan Company 42406-01 • 20080926 4 • Wirin g th e Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch...

Page 8 - • Inst al lin g th e C anopy and C anopy Trim Rin g; Failure to complete this step could cause fan to fall.

8 Hunter Fan Company 42406-01 • 20080926 5 • Inst al lin g th e C anopy and C anopy Trim Rin g 5-1. Rotate the hanger ball so the tab in the canopy is secure in the groove in the hanger ball. WARNING: Failure to complete this step could cause fan to fall. 5-2. Lift the fan and align the canopy screw...

Page 9 - • A ssemblin g th e Bl ade s; insert them by hand into the holes on the blades.

9 Hunter Fan Company 42406-01 • 20080926 6 • A ssemblin g th e Bl ade s Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each ...

Page 10 - • Completin g Your Inst al l ation With or Without a Li g ht Fi xture; Use only the light fixture supplied with this fan model.; assembly screws into the switch housing mounting plate.; Make sure the upper switch housing is securely; -5. If you want to install the light fixture

10 Hunter Fan Company 42406-01 • 20080926 7 • Completin g Your Inst al l ation With or Without a Li g ht Fi xture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR withou...

Page 11 - -6. To attach the lower switch housing, connect the upper plug; If you are not installing the light fixture, your installation is; In compliance with US federal energy regulations, this

11 Hunter Fan Company 42406-01 • 20080926 Lower Switch Housing Plug Connector Housing Assembly Screw Plug Connector Detail Steps 7-6 – 7-7 7-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: ...

Page 12 - Uninstalling the Light Fixture

12 Hunter Fan Company 42406-01 • 20080926 7 • Completin g Your Inst al l ation With or Without a Li g ht Fi xture (Continu ed) Uninstalling the Light Fixture 1. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the red wire. 2. Disconnect the plug connec...

Page 13 - Installing the Glass Bowl; Thread the fan pull chain through the hole in the metal disc. Then,

13 Hunter Fan Company 42406-01 • 20080926 Installing the Glass Bowl 1. First install two candelabra base incandescent bulbs.2. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra cha...

Page 14 - • The chain uses a breakaway connector that separates if the; To Change Airflow Direction; In warm weather; In cold weather; • O p eratin g and Cleanin g Your C ei lin g Fan

14 Hunter Fan Company 42406-01 • 20080926 8-1. Turn on electrical power to the fan.8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings.• Release slowly to prevent the chain from recoili...

Page 15 - • Trouble sho otin g; plate and in the upper and lower switch housing.; Problem: Lights dim when turned on or do not turn on; Check to make sure wattage of light bulbs installed match the

Step Title 15 Hunter Fan Company 42406-01 • 20080926 9 • Trouble sho otin g Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housin...