Hunter 41535-01 - Manuals

Hunter 41535-01 – Manual in PDF format online.

Manuals:

Manual

Manual Hunter 41535-01

Summary

Page 2 - Step 5: Hanging of Motor; NOTE: The green ground wire attached to the plastic; Step 4: Installation of Ceiling Plate; NOTE: When attaching the ceiling plate to the outlet box; CONNECTOR

41535-01 10/8/2001 2 © 2001 Hunter Fan Company B. Bring electrical cable into the outlet box and attach with an approved connector. Make certain that wiring meetsall national and local electrical codes. Wire leads shouldextend at least 6" beyond outlet box for ease in mak-ing connections. See Fi...

Page 3 - Step 6: Final Wiring; NOTE; : If a separate wall switch will be used to control a light-; NOTE: If the wires are not pushed up into the outlet box,; : Grommets are usually assembled by hand. If you use a; Step 7: Finish Fan Assembly; FIGURE 9

41535-01 10/8/2001 3 © 2001 Hunter Fan Company Step 6: Final Wiring A. Connect electrical supply leads to the leads from mo- tor, using approved connectors. See Figure 9. 1. Connect black electrical supply lead to the black motorlead and the black with white stripe motor lead (seenote). 2. Connect t...

Page 5 - Step 11: Operation of Fan; Problem; Troubleshooting Guide

41535-01 10/8/2001 5 © 2001 Hunter Fan Company Step 11: Operation of Fan A. Turn electrical service on at main panel.B. Switch operates in this sequence: “high,” “medium,” “low,” “off.” Pull chain slowly to operate. Also, releasethe chain slowly so as to prevent chain from flying upinto blades, poss...