Hunter 23838 - Manuals - manualsarea.com

Page 2 - Welcome; Cautions and Warnings; READ AND SAVE THESE INSTRUCTIONS

Welcome Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan.We are proud of our work. We appreciate the opportunity t...

Page 3 - Optional Accessories; Understanding Mounting

Hunter Fan Company 41532-01 • 11/05/14 3 Optional Accessories Understanding Mounting Hunter’s patented mounting system provides you maximum ease in installing your fan. This fan was designed to be mounted only on flat ceilings and can be used only on ceilings no less than 8 feet high. Considering Op...

Page 4 - Gathering the Tools; Checking Your Fan Parts; Getting Ready

Hunter Fan Company 41532-01 • 11/05/14 4 To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 70 lbs (31.8 kg) pounds. If you need help inst...

Page 5 - CAUTION; NEVER LIFT THE MOTOR BY THE WIRES.

Hunter Fan Company 41532-01 • 11/05/14 5 Pre-Installation Pre-Installation Select installation site: Normally this is near the center of the room, often replacing a light fixture. Make certain that ample clearance is left for the rotating fan blades. For maximum efficiency, no obstruction (walls, po...

Page 6 - Installing Ceiling Hardware; DO NOT USE LUBRICANT ON SCREWS; Exploded View

Hunter Fan Company 41532-01 • 11/05/14 6 Installing Ceiling Hardware Fig. 2 3 1/2” Lag Bolt CAUTION DO NOT USE LUBRICANT ON SCREWS ! ! 1. Drill two (2) 1/4” diameter holes 2-9/16” apart through the back of the outlet box into the cross brace 2" deep. These holes are for the U-bracket bolts. Inst...

Page 7 - TO SECURELY HANG THE FAN, CAREFULLY FOLLOW THE STEPS ON PAGES 7 AND 8.; Hanging The Fan; NOTE

Hunter Fan Company 41532-01 • 11/05/14 7 Motor Housing Hanger Pipe Wires Motor Housing Set Screw TO SECURELY HANG THE FAN, CAREFULLY FOLLOW THE STEPS ON PAGES 7 AND 8. BE SURE TO TIGHTEN THE HANGER PIPE INTO THE FAN AND THE HANGER BRACKET ONTO THE PIPE. TIGHTEN THE 2 SET SCREWS, AS DESCRIBED IN STEP...

Page 9 - BE CERTAIN THAT THE ELECTRICITY IS TURNED OFF AT THE; NO BARE WIRES OR WIRE STRANDS SHOULD; Wiring the Fan

Hunter Fan Company 41532-01 • 11/05/14 9 CAUTION BE CERTAIN THAT THE ELECTRICITY IS TURNED OFF AT THE MAIN PANEL BEFORE STARTING THIS SECTION. ! ! CAUTION NO BARE WIRES OR WIRE STRANDS SHOULD BE VISIBLE AFTER MAKING CONNECTIONS. ! ! Wiring the Fan Wall switches are not included. Select an acceptable...

Page 10 - Installing The Canopy

Hunter Fan Company 41532-01 • 11/05/14 10 NOTE: Your canopy comes pre-assembled. Uninstall the canopy screws using a #1 Phillips-head screwdriver and separate the two halves of the canopy before continuing to step 1. 1. Assemble canopy halves around pipe, and loosely install the canopy assembly scre...

Page 11 - Lubrication; Adding Oil; WITHOUT OIL OR WITH LOW OIL WILL VOID YOUR WARRANTY.

Hunter Fan Company 41532-01 • 11/05/14 11 Lubrication Adding Oil Note: Your fan has been shipped without oil in the motor. A tube of high grade SAE 10 non-detergent oil is packaged in the hardware bag.1. Remove cap if present.2. Cut the tip off the end of the tube (see Fig. 11).3. Place the tube int...

Page 12 - TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE; Fan Blade Assembly

Hunter Fan Company 41532-01 • 11/05/14 12 CAUTION TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE BRACKETS WHEN INSTALLING THE BRACKETS, BALANCING THE BLADES, OR CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS IN BETWEEN ROTATING FAN BLADES. ! ! Fan Blade Assembly 1. Insert blade gromme...

Page 13 - Checking Oil; UP; Operation And Care; To Reverse The Flow Of Air.

Hunter Fan Company 41532-01 • 11/05/14 13 Checking Oil 1. Check oil level immediately after filling the reservoir and every 1 to 5 years thereafter.2. To check oil, bend an ordinary pipe cleaner into 1/2” long hook and dip it into the oil reservoir (see. Fig. 17). 3. If the oil touches the end of th...

Page 14 - Beat the High Cost of Cooling; Energy Star

Hunter Fan Company 41532-01 • 11/05/14 14 Hunter fans have the power to cut your cooling costs up to 40%. Beat the High Cost of Cooling The air movement created by a Hunter ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to 7...

Page 15 - Troubleshooting Guide

Hunter Fan Company 41532-01 • 11/05/14 15 Troubleshooting Guide Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Check all connections according to the wiring the fan section.3. Pull the pull chain to ensure it is on. Problem: Noisy operation. 1. Tight...