Hunter 23348 - Manuals - manualsarea.com

Page 2 - ceiling fan is an addition to your home or office that; Cautions and Warnings; qualified electrician.; Welc om e; Table Of Contents

2 42664-01 • 06/09/08 • Hunter Fan Company © 2008 Hunter Fan Company Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your ...

Page 3 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice; of three ways, depending on ceiling height and your preference: Low; Considering Optional Accessories; performance of your Hunter fan, use only Hunter speed controls.; Standard Mounting; Low Profile Mounting; reduce the risk of

3 42664-01 • 06/09/08 • Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, dep...

Page 4 - Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

4 42664-01 • 06/09/08 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 5 - To avoid possible electrical shock, before installing your fan,; outermost holes in the outlet box. The pilot holes should be 9/64”; For Angled Ceilings:; • Inst al lin g th e C ei lin g Pl at e

5 42664-01 • 06/09/08 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fa...

Page 6 - • A ssemblin g th e Bl ade s

6 42664-01 • 06/09/08 • Hunter Fan Company 3-1. Attach each blade to the blade iron using three barrel nuts and three decorative screws. Use the provided Allen wrench to attach the decorative screws. You may install the decorative screws and barrel nuts facing up or down. 3-2. Attach each blade iron...

Page 7 - -1. Unbundle the wires from the fan and remove the paper caution; The adapter has a special coating on the threads. Do; -6. Align the holes in the washer with the holes in the adapter.; • A ssemblin g and Han g in g th e Fan

7 42664-01 • 06/09/08 • Hunter Fan Company WARNING: Fan may fall if not assembled as directed in these installation instructions. 4-1. Unbundle the wires from the fan and remove the paper caution tag. Do not discard the tag until your installation is complete. For Standard or Angled mounting:4-2. To...

Page 8 - fsdfsdf; Single Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black; Be sure no bare wire or wire strands are visible after; ceiling plate into the outlet box.; Single Switch Wiring; • Wirin g th e Fan

8 42664-01 • 06/09/08 • Hunter Fan Company fsdfsdf All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with na...

Page 9 - Failure to complete the following steps could cause the fan; -1. Rotate the hanger ball so the tab in the canopy is secure in the; The slots in the canopy must remain engaged while; -3. Holding the canopy up with the screw holes aligned, partially; • Inst al lin g th e C anopy and C anopy Trim Rin g

9 42664-01 • 06/09/08 • Hunter Fan Company WARNING: Failure to complete the following steps could cause the fan to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. 6-1. Rotate the hanger ball so the tab in the canopy is secure in the hanger ball groove. Note:...

Page 10 - • Inst al lin g th e Wal l Control

10 42664-01 • 06/09/08 • Hunter Fan Company You must install the wall control included with this product in order to control the fan speed. Only one wall control can be used to control the fan speed. 7-1. Turn circuit breaker to the fan wall switch OFF.7-2. Remove the wall plate and switch.7-3. With...

Page 11 - In warm weather; In cold weather; -2. The fan pull chain controls power to the fan. The pull chain has; • O p eratin g and Cleanin g Your C ei lin g Fan

11 42664-01 • 06/09/08 • Hunter Fan Company In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and O...

Page 12 - • Trouble sho otin g

12 42664-01 • 06/09/08 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Push motor reversing switc...