Humax IHDR-5200C - Manuals

4 1. Checking Accessories Note: The accessories may vary according to area. 2. Product Overview Front Panel Note: The image shown may differ from the actual product. Quick Start Guide Quick Start Guide User's manual CD Manual & Quick Start Guide SCART Cable HDMI Cable Remote Control & Batter...

English 5 Quick Start Guide Inserting the Smartcard 1. Open the flap on the front panel to expose the card slot.2. Hold Smartcard horizontally with the electronic chip facing downwards. 3. Insert the Smartcard into the slot. Rear Panel Note: The image shown may differ from the actual product. CABLE ...

6 Quick Start Guide Remote Control Note: • To control the product please make sure that the PVR mode is selected on the remote control. • The image shown may differ from the actual product. • Some playback control buttons may not function depending on the contents. MUTE Mutes audio. STANDBY Switches...

English 7 Quick Start Guide +/- Adjusts the audio volume. P / Changes the channel or page. LIST Displays the channel list. i (Information) Displays the channel and programme information. OPT+ Displays the channels attributes. AUDIO Displays the audio list. SUBTITLE Displays the subtitle language lis...

English 9 Quick Start Guide Connecting the Cable TV Line Connect an antenna cable from your cable TV network to CABLE IN connector. Connecting the TV and VCR You can select one of the following connections depending on the equipment you have. ݎ TV with the HDMI connector; For the best picture qualit...

10 Quick Start Guide Connecting the Network ݎ Connecting to the LAN; Connect one end of the Ethernet cable to the product and the other end to the LAN router. ݏ Connecting to the Wi-Fi (Wireless LAN); (Reserved for future use.) You can connect the network via the Wi-Fi access point or DSL/cable mode...

English 11 Quick Start Guide 4. Powering On 1. Connect the power cord of the product to a wall outlet.2. Ensure the ON/OFF switch at the rear of the product is switched to ON . 3. Power on by pressing the STANDBY button on the remote control or the STANDBY button at the front of the product. Note: T...

12 Quick Start Guide 5. First Installation Wizard When powering on your product for the first time after purchase or performing the factory default in menu, the installation wizard will operate automatically. Note: If you exit the installation wizard without fully completing the channel searching pr...

English 13 Quick Start Guide Save the found channels when the search is complete. 4. Configure Network Make sure that the LAN cable is connected to the Ethernet port or the wireless USB dongle is enabled. Configure the network setting. Note: The Wi-Fi network is currently not supported. (Reserved fo...

14 Quick Start Guide 6. Menu Overview Channel List TV Guide Video Music Photo Settings Preferences • Parental Control • Language• Time• Video• Audio• Recording• Screen Display Edit Channels • Edit Favourite List • Edit Channel List • Favourite Ch Numbering • Hide Recent List Installation • Channel S...

English 15 Changing Channels You can change the channels in several ways. Press the P / button. Enter the channel number directly. (0-9) Go to the channel list or TV guide and select a channel. Note: • Press the TV/RADIO button to switch between TV and radio channels. • Press the BACK button to retu...

16 Basic Operation Display Format / Resolution Setting Display Format Press the WIDE button to set the display format according to the screen ratio.Each time you press this button, the value changes. Screen ratio 4:3: Auto – Letterbox 16:9 – Letterbox 14:9 – Centre Screen ratio 16:9: Auto – Full – Z...

English 17 Basic Operation Programme Information (i-plate) The i-plate is an information banner that is displayed for a certain period of time whenever you change channels. Press the i button while watching a progamme to display the i-plate. Press the EXIT button to hide. Display Navigation mode Vie...

18 Basic Operation Sleep Timer Press the SLEEP button to set the automatic turn off time.Each time you press this button, the value changes. 10 - 20 - 30 - 60 - 90 - 120 minutes Subtitle You can select the subtitle language when subtitle information is provided. 1. Press the SUBTITLE button. 2. Sele...

English 19 Basic Operation Option You can set the options for the watching channel. 1. Press the OPT+ button. 2. Select an option. Favourite : Select the favourite group to add the channel. Lock : Select On or Off . 3. Select OK to save and exit. Teletext Teletext is a free service broadcast which g...

20 The channel list will help you find the channel you want to watch quickly and easily. You can access the channel list in several ways. Press the LIST or OK button. Press the MENU button and select Channel List . Changing Channels You can change the channels within the same channel group.Select th...

English 21 Channel List Editing Channels in Channel List You can lock each channel in the channel list, as well as in menu. To edit the multiple channels, go to the MENU > Settings > Edit Channels . Locking Channels 1. Select a channel you want to edit and press the GREEN button. 2. Select an ...

22 Editing Channels The Edit Channel List menu will help you lock multiple channels. MENU Settings Edit Channels Edit Channel List You will be prompted to enter the password to access this menu. Note: The default password is 0000. If you have forgotten your password, please contact your local distri...

24 Managing Channels Editing Favourite Channels The Edit Favourite List menu will help you add or remove channels from the favourite groups. MENU Settings Edit Channels Edit Favourite List You will be prompted to enter the password to access this menu. Note: The default password is 0000. If you have...

English 25 Managing Channels Renaming Favourite Groups 1. Press the YELLOW button and select the favourite group you want to edit. 2. Press the OPT+ button. 3. Select Rename Favourite . 4. Enter the name in the keyboard. Advanced Options Changing Group To list the channels of other groups in the lef...

26 Managing Channels Favourite Channel Numbering You can change the favourite channel numbers to be numbered in the order in which they are added. MENU Settings Edit Channels Favourite Ch Numbering You will be prompted to enter the password to access this menu. Note: The default password is 0000. If...

English 27 The TV guide is an on-screen guide of grid type which displays the programme information of channels in time and date order. You can access the TV guide in several ways. Press the GUIDE button. Press the MENU button and select TV Guide . Note: Press the GUIDE or EXIT button to exit. Press...

28 TV Guide Setting Reminders or Recordings 1. Select a future programme and press the OK button. 2. Select Reminder or Record and press the OK button. Select Repeat to change the repeat mode. 3. Press the OK button again to cancel the reservation. The reserved programmes will be added automatically...

English 29 TV Guide Finding Programmes Find will help you find the programmes more specifically using the keyword or genre. By Keyword 1. Press the GREEN button. 2. Select Keyword and press the button. 3. Select a keyword and press the OK button. Note: To enter a new keyword, select New Keyword . By...

English Record Select Confirm Enter 0~9 31 Recording and Playback You can record programmes in the built-in hard disk drive and playback the recorded programmes whenever you want. Note: Recorded radio programmes are saved in the Video List. Recording You can watch another channel while recording a c...

32 Record Select Confirm Enter 0~9 Recording and Playback Delayed Recording You can rewind the currently watching programme to the point you started watching and start recording from that point. To rewind the programme you are watching, press the button to go back to the moment you started watching....

English Record Select Confirm Enter 0~9 33 Recording and Playback Recording Conflict You can watch another channel while recording a channel or record programmes from two different channels at the same time. Recording Duration Conflict When an instant recording conflicts with one of the scheduled re...

34 Record Select Confirm Enter 0~9 Recording and Playback Setting Recording Options MENU Settings Preferences Recording You can set the recording padding time in case the recording starts earlier or ends later than scheduled. Start Padding Time : Additional recording time before the recording starts...

English Record Select Confirm Enter 0~9 35 Recording and Playback Playback You can playback the recorded programmes that are stored in the built-in hard disk drive. Playing Recordings (Video) You can access the recorded file list easily and play the recorded programmes. Press the MEDIA button. Press...

36 Record Select Confirm Enter 0~9 Recording and Playback Playback Controls Play Pause the scene. Press the PAUSE button again to go back to play mode. Stop the playback of the current file and go to live TV. Fast Rewind Fast Forward Move to the previous chapter and replay the scenes. Move to the ne...

38 Media On/Off Select Confirm Enter 0~9 You can retrieve video, music or photo files from the built-in hard disk drive, the USB storage devices, or the DLNA compliant devices. You can access Media List in several ways. Press the MEDIA button. Press the MENU button and select Video , Music or Photo ...

English Media On/Off Select Confirm Enter 0~9 39 Media List Note: • Please use only the USB storage device which was formatted with ext3, FAT or NTFS file system. • Supported features according to USB file system ext3: Read, Copy (Digital TV/Radio, MP3, JPEG, XviD) FAT: Read, Copy (Digital TV/Radio,...

40 Media On/Off Select Confirm Enter 0~9 Media List Using Video List You can play TV/Radio recordings or XviD files from the built-in hard disk drive, the USB storage devices, or the DLNA compliant devices. MENU Video Note: • Press the YELLOW button to switch the media type. • Press the BLUE button ...

English Media On/Off Select Confirm Enter 0~9 41 Media List Play Options Select the file and press the OK button. The play options for video will pop up. Resume Play : Play the file from the point it has been stopped. Play from the Start : Play the file from the beginning. Delete : Delete the file. ...

English Media On/Off Select Confirm Enter 0~9 43 Media List Using Music List You can play MP3 audio files from the built-in hard disk drive, the USB storage devices, or the DLNA compliant devices. MENU Music Note: • Press the YELLOW button to switch the media type. • Press the BLUE button to switch ...

44 Media On/Off Select Confirm Enter 0~9 Media List Music Player The music player is displayed while playing the music file(s). Plays or pauses Plays Plays the previous file Pauses Plays the next file Changes the play mode (once, repeat, repeat all, shuffle) Plays the first file Stops the music play...

English Media On/Off Select Confirm Enter 0~9 45 Media List Using Photo List You can play JPEG photo files from the built-in hard disk drive, the USB storage devices, or the DLNA compliant devices. MENU Photo Note: • Press the YELLOW button to switch the media type. • Press the BLUE button to switch...

46 Media On/Off Select Confirm Enter 0~9 Media List Editing Files Deleting, moving, renaming the photo files or creating new folders are the same as in the video list. Refer to Using Video List > Editing Files . Slide Mode You can play music files during slideshow. 1. Press the OPT+ button. 2. Se...

English Menu On/Off Select Confirm Enter 0~9 47 In this chapter you can set options for parental control, language, time, video, audio and others. Note: Press the MENU or EXIT button to exit. Press the BACK button to return to the previous screen. Parental Control MENU Settings Preferences Parental ...

48 Menu On/Off Select Confirm Enter 0~9 Preferences Language Setting MENU Settings Preferences Language 1. Select System Language , Audio Language or Subtitle Language . 2. Select the language. Note: • If you select Off in subtitle language, the subtitle will not be displayed. • You can change the a...

English Menu On/Off Select Confirm Enter 0~9 49 Preferences Video Setting MENU Settings Preferences Video Setting TV Screen Ratio You can select the screen ratio of your TV. 1. Select Screen Ratio . 2. Select an option. 16:9 – 4:3 Setting Display Format You can select the display format according to...

50 Menu On/Off Select Confirm Enter 0~9 Preferences Setting TV SCART / VCR SCART You can select the video signal output option for the TV SCART or VCR SCART. 1. Select TV SCART or VCR SCART . 2. Select an option. TV SCART: CVBS – S-Video – RGB VCR SCART: CVBS – S-Video Audio Setting MENU Settings Pr...

English Menu On/Off Select Confirm Enter 0~9 51 Preferences Screen Display MENU Settings Preferences Screen Display Setting Info Display Time You can set the duration the information box is displayed every time the channel is switched. 1. Select Info Display Time . 2. Select an option. Off – 1~20 se...

52 Menu On/Off Select Confirm Enter 0~9 In this chapter you can configure the installation setting and perform the channel search. MENU Settings Installation You will be prompted to enter the password to access this menu. Note: • The default password is 0000. If you have forgotten your password, ple...

54 Menu On/Off Select Confirm Enter 0~9 Installation Factory Default MENU Settings Installation Factory Default 1. Select Factory Default . 2. A popup will appear. Select Yes . 3. You will be prompted to enter the password. Enter the password. Note: • The default password is 0000. If you have forgot...

English Menu On/Off Select Confirm Enter 0~9 55 In System , you can view the information of the system, signal detection, power management, conditional access, mail messages, data storage and network options are also available in this section. Note: Press the MENU or EXIT button to exit. Press the B...

56 Menu On/Off Select Confirm Enter 0~9 System Power Management MENU Settings System Power Management Setting Power Saving in Standby You can minimise the standby power consumption to below 1W. 1. Select Power Saving in Standby . 2. Select On to deactivate the certain features and minimise the power...

English Menu On/Off Select Confirm Enter 0~9 57 System Mail Messages MENU Settings System Mail Message You can receive mail sent by the broadcasting company. When a new mail arrives, the mail icon will appear on the screen. Press the OK button to see the details. The forced announcement mail will di...

English Menu On/Off Select Confirm Enter 0~9 59 System Setting FTP Server You can transfer the media files in the internal HDD into your PC with FTP program. 1. Select FTP Server. 2. Select On to make the product work as FTP server. Note: • You can access to the internal HDD by entering the IP addre...

60 Appendix Specification Tuner & Channel No. of Tuners 2 Input Connector IEC 169-2, Female Frequency Range 54MHz to 870MHz Signal Level -15dBmV to +15dBmV @ 64-QAM, 128-QAM-12dBmV to +15dBmV @ 256-QAM Audio/Video Decoding Audio Decoding MPEG/MusiCam Layer I & II, Dolby AC-3, Dolby Digital P...

English 61 Appendix Power Supply Input Voltage 90-250V a.c., 50/60Hz Type SMPS Power Consumption Max. 28W (Standby: Under 1W ) Protection Separate internal fuse.The input should be protected against lightning. Physical Specification Size (w/h/d) 380mm×55mm×246mm Weight 2.8kg Operating Temperature 0 ...

62 Appendix Service and Support Information concerning troubleshooting, software upgrade and product support is provided in the following websites and call centers. Should your product require warranty service, please contact HUMAX to obtain the appropriate authorization. HUMAX Call Center Nederland...

English 63 Appendix Safety Warning This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. Safety Instructions and Precautions 1. MAINS SUPPLY • Operate this product only from the type of power supply indicated on the ...

64 Appendix 12. LOCATION • Place the product indoors to avoid exposing it to lightning, rain or sun. Do not place it near a radiator or heat register. • We recommend that the product has 10 cm clearance from any other appliances susceptible to electromagnetic influences, such as a TV or a VCR. • Do ...

English 65 Appendix Trouble Shooting Before contacting your local service centre, please read the tips below carefully. If the problem persists after completing the following procedure, please contact your local product distributor or service centre for further instructions. 1. No message displayed ...

English 67 Appendix Error Message Error message Possible causes What to do No or bad signal The cable is not connected. Make sure the cable is connected correctly. The cable may be damaged or defective. Exchange the cable. The channel is not broadcasting. Exchange the cable. The channel is scrambled...

68 Appendix Glossary CVBS (Composite Video Baseband Signal) A technology for transmitting video signals via a cable. Mixes luminance (brightness) and the chrominance (colour) signals together. DiSEqC (Digital Satellite Equipment Control) A DiSEqC compatible receiver relies on a switching box which d...

70 Remote Control Code List 1. Using the Universal Remote Control 1. Select the mode(PVR, TV, DVD, AUDIO) you want to set by pressing the corresponding button on the remote control. The button will blink once. 2. Keep pressing the button for 3 seconds until the button lights on. 3. Enter the 3-digit...

English 101 Appendix OPEN SOURCE SOFTWARE NOTICE HUMAX products use certain open source operating system software distributed pursuant to GNU GENERAL PUBLIC LICENSE Version 2 and GNU LESSER GENERAL LICENSE Version 2.1 each as defined and published by the Free Software Foundation, Inc. The following ...