Huffy M580001 - Manuals

7 05/05 ID# M580001 S SEEC CT TIIO ON N A A:: A AS SS SEEM MB BLLEE T TH HEE P PO OLLEES S 1. Correctly identify each pole section. Poles have an identification sticker that will be used as a reference point in the next step. 3 2 4 TOP MIDDLE BOTTOM Reference Stickers

8 ID# M580001 05/05 2. IMPORTANT! ONCE POLE SECTIONS ARE POUNDED TOGETHER- THEY CANNOT BE TAKEN APART 3 2 4 TOP MIDDLE BOTTOM alignment mark alignment mark alignment mark Align poles using alignment marks. First, pound top andmiddle poles together by bouncing them on a scrap piece ofwood on the grou...

9 05/05 ID# M580001 Attach pole assembly to tank as shown. Secure pole assembly to tank by turning the pole assembly clockwise as shown. 3. 18 19 4 CAREFULLY TIPPING THE SYSTEM FORWARD WILL ALLOW EASIER ACCESS TO UNDERSIDE OF BASE NOTE: TWO PEOPLE REQUIREDFOR THIS PROCEDURE.FAILURE TO FOLLOW THISWAR...

11 05/05 ID# M580001 Pole bracket will need to be lightly pressed into backboard ribbing. Be sure to presscompletely into place. Attach rim to backboard and pole bracket (14) with nut (20),reinforcement bracket (15), and carriage bolt (8) as shown. Tighten nut completely. PRESS BRACKET(14) INTO PLAC...

12 ID# M580001 05/05 7 9 7. 8. Attach board assembly to pole with carriagebolts (16) and knobs (11) as shown. Install polecap (7) as shown. Place assembled unit in desired location. Fill tank completely with water (14 gallons/53liters) or sand (approx. 170 lb./77 kg) and snap tank cap (9) in place. ...