Page 2 - from holes if necessary.; NOTE: Not all items pictured are included with every model.
2 ID# M7301241 04/06 BEFORE YOU START! To ensure optimal playability of backboard system, a close tolerance fit between the elevator components and hardware is required. Test-fit large bolts into large holes of elevator tubes, backboard brackets, and triangle plates. Carefully rock them in a circula...
Page 3 - WARNING
• DO NOT HANG on the rim or any part of the system including backboard, support braces, or net. • During play, especially when peforming dunk-type activities, keep player's face away from the backboard, rim and net. Serious injury could occur if teeth/face come in contact with backboard, rim, or net...
Page 4 - MOVING SYSTEM; SAFETY INSTRUCTIONS; • If using a ladder during assembly, use extreme caution.; Use caution when using this unit.
4 ID# M7301241 04/06 LEVER 1 2 BROOM HANDLE 201257 3/99 1 2 4 3 MOVING SYSTEM 1. Adjust basketball backboard height to lowest position. 2. While holding pole, rotate basketball system forwarduntil wheels engage withground. 3. Move basketball system to desired location. 4. Carefully rotate basketball...
Page 5 - NOTICE TO ASSEMBLERS
5 04/06 ID# M7301241 For more information on assembly, placement, properuse, and maintenance, visit The American BasketballCouncil website at http://www.smarthoops.com. IMPORTANT! Remove all contents from boxes. Be sure to check inside pole sections; hardware and additional parts are packed inside. ...
Page 6 - FRONT
6 ID# M7301241 04/06 Get to know the basic parts of your basketball system... STRUT BACKBOARD FRONT RIM WHEEL CARRIAGE ASSEMBLY BASE POLE
Page 7 - Description
7 04/06 ID# M7301241 Item Qty. Part No. Description 1 1 206657 Tank, (Black) 2 1 200628 Wheel Axle 3 2 226401 Wheel, 4” (Black) 4 2 203617 Plug Cap 5 1 908071 Top S-Pole Section 6 1 90807201 Middle S-Pole Section 7 1 908073 Bottom S-Pole Section 8 1 202820 Rod, 3/8 O.D. x 4-3/4” Long 9 1 202822 Eyeb...
Page 10 - TOOLS REQUIRED FOR THIS SECTION; SECTION A: ASSEMBLE THE BASE
10 ID# M7301241 04/06 TOOLS REQUIRED FOR THIS SECTION SECTION A: ASSEMBLE THE BASE This is what your system will look like when you’ve finished thissection: Item #21 (2) (2) 1/2” and (2) 9/16” Wrenches 9/16” 1/2” (2) Socket Wrenches and Sockets AND/OR
Page 11 - Correctly identify each pole section as labeled.
11 04/06 ID# M7301241 1. 7 5 TOP BOTTOM MIDDLE 6 Correctly identify each pole section as labeled. 2. 9 8 7 Install rod (8) through holes in bottom pole section (7) and eyebolt (9).
Page 17 - SECTION B: ATTACH THE BACKBOARD; Hammer or Mallet; AND
17 04/06 ID# M7301241 TOOLS REQUIRED FOR THIS SECTION SECTION B: ATTACH THE BACKBOARD This is what your system will look likewhen you’ve finished this section: Hammer or Mallet (2) 1/2”, (2) 9/16” AND (2) 3/4” Wrenches 9/16” 1/2” 3/4” (2) Socket Wrenches and Sockets AND Needle-Nose Pliers AND/OR
Page 18 - Place backboard brackets (25) inbetween backboard struts as shown.
18 ID# M7301241 04/06 25 1. Place backboard brackets (25) inbetween backboard struts as shown. 2. 25 NOTE ORIENTATION Test fit bolts intoholes of backboardbrackets (29) andcarefully rock themin a circular motionto ream out paintfrom holes ifnecessary. IMPORTANT! Assemble backboard brackets (25) usin...
Page 19 - NOTE: Completed Assembly
19 04/06 ID# M7301241 30 28 31 30 28 29 29 11 11 27 32 32 25 4. Attach lower elevator tubes (28) to backboard brackets (25) using spacers (29 & 11), bolts (30)spacer (13) ratchet (31), and nuts (32) as shown. 13 3. Fit spacer (26) into pawl (27). Then insert pawl assembly between backboard brack...
Page 20 - notch of the bracket; FIG A
20 ID# M7301241 04/06 20 18 25 5. 33 34 27 34 35 6. 7. Secure pawl (27) in place withclevis pin (33) and washers (34). Hook one end of the spring (35) into hole ofclevis pin (33). Stretch spring (35) and hook itinto the notch of the bracket with pliers. Insert “T” bolt (36) through Slam Jam bracket ...
Page 22 - Install Slam Jam Rim to Backboard
22 ID# M7301241 04/06 10. 40 43 42 37 36 Install Slam Jam Rim to Backboard 39 41 36 42 43 A B C D E A Fit rim (39) securely into bracket (37) as shown. Allow T-bolt (36) to slip through center hole in rim (39). B Install reinforcement bracket (40) onto T-bolt (36) as shown. C Install spring (41) ont...
Page 23 - SECTION C: APPLY HEIGHT AND MOVING LABEL & SECURING SYSTEM; Peel protective
23 04/06 ID# M7301241 1. Carefully upright assembly. Apply moving system label (23) to front of pole as shown. Regulationrim height is 10 feet (3.05 m). 2. Place assembled unit in desired location. Fill tank withwater (30 gallons/114 liters) or sand (300 lb./136 kg)and snap tank cap (4) in place. SE...
Page 24 - Système portable; Tragbares System; Sistema portátil; FRANÇAIS; Inscrivez ici le numéro de modèle qui
24 ID# M7301241 04/06 Numéro sans frais du service clientèle (États-Unis) : 1-800-558-5234 ; Canada : 1-800-284-8339 ; Europe : 00 800 555 85234 (Suède : 009 555 85234), Pour l'Australie : 1-800-333 061 - Site Internet : http://www.huffysports.com Gebührenfreie Kundendienstnummer für Anrufer in den ...
Page 26 - VORBEREITENDE MASSNAHMEN
26 ID# M7301241 04/06 AVANT DE COMMENCER! ¡ANTES DE COMENZAR! VORBEREITENDE MASSNAHMEN Pour garantir l'utilisation optimale du panneau, les composants du système élévateur et la visserie doivent être bien ajustés (serrés). À titre d'essai, insérez les gros boulons dans les gros trous des tubes du sy...
Page 28 - ¡INSTRUCCIONES DE SEGURIDAD!; CONSIGNES DE SÉCURITÉ!
28 ID# M7301241 04/06 SICHERHEITSHINWEISE! EIN MISSACHTEN DIESER SICHERHEITSHINWEISE KANN ZU SCHWEREN VERLETZUNGEN UND/ODER SACHSCHÄDEN FÜHREN UND MACHT DIE GARANTIE UNWIRKSAM.. Der Eigentümer muss sicherstellen, dass alle Spieler diese Regeln für einen sicheren Betrieb des Systems kennen und befolg...
Page 29 - AVIS AUX PERSONNES CHARGÉES DU MONTAGE; est INACCEPTABLE de composer un système de lestage de fortune.; HINWEIS FÜR DIE PERSONEN, DIE DEN ZUSAMMENBAU DURCHFÜHREN; Notbehelfsmaßnahmen gegriffen werden.; AVISO PARA LAS PERSONAS QUE REALIZAN EL MONTAJE; NE RETOURNEZ PAS au magasin !; Fragen oder fehlende Teile?; Gehen Sie NICHT zum Laden zurück!; ¿Tiene preguntas o le faltan piezas?; ¡NO regrese a la tienda!
29 04/06 ID# M7301241 IMPORTANT! Videz entièrement les boîtes. Veillez à vérifier l'intérieur des sections de poteau. La quincaillerie et des pièces supplémentaires sont emballées à l'intérieur. ¡IMPORTANTE! Saque todo el contenido de las cajas. Asegúrese de revisar el interior de las secciones del ...
Page 30 - Conozca las piezas básicas de su sistema de baloncesto...
30 ID# M7301241 04/06 SOCLE BASEBASE CONTREFICHES STREBEN PUNTALES PANNEAU KORBWAND RESPALDO CERCEAU KORBRAND BORDE SECTION DE POTEAU SUPÉRIEURE OBERES STANGENTEIL SECCIÓN SUPERIOR DEL POSTE SECTION DE POTEAU CENTRALE MITTLERES STANGENTEIL SECCIÓN MEDIA DEL POSTE SECTION DE POTEAU INFÉRIEURE UNTERES...
Page 34 - SECTION A : MONTAGE DU SOCLE
34 ID# M7301241 04/06 OUTILS REQUIS POUR CETTE SECTION FÜR DIESEN BAUABSCHNITT BENÖTIGTES WERKZEUG HERRAMIENTAS REQUERIDAS PARA ESTA SECCIÓN SECTION A : MONTAGE DU SOCLE BAUABSCHNITT A: ZUSAMMENBAU DES SOCKELS SECCIÓN A: MONTAJE DE LA BASE Voici à quoi ressemblera votre système lorsquevous en aurez ...
Page 35 - Identifiez correctement chaque section de poteau étiquetée.
35 04/06 ID# M7301241 1. 7 5 SUPÉRIEURE OBEN SUPERIOR INFÉRIEURE UNTEN INFERIOR CENTRALE MITTE MEDIA 6 Identifiez correctement chaque section de poteau étiquetée. Jedes Stangenteil anhand seiner Beschriftung richtig identifizieren. Identifique correctamente cada sección del poste según está rotulada...
Page 41 - OUTILS REQUIS POUR CETTE SECTION
41 04/06 ID# M7301241 SECTION B : ATTACHEZ LE PANNEAU BAUABSCHNITT B: ANBRINGEN DER KORBWAND SECCIÓN B: CONECTE EL RESPALDO (2) clés 1/2", (2) clés 9/16" ET (2) clés 3/4" (2) 1/2", (2) 9/16" UND (2) 3/4" Schraubenschlüssel (2) Llaves de 1/2", (2) de 9/16"" Y (2) d...