Page 2 - MOVING SYSTEM; WARNING
2 ID# M611701 12/05 10-3/4" High 4" Wide PMS 021 for Warning Owner must ensure that all players know and follow these rules for safe operation of the system. WARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net. • During play, especially when ...
Page 3 - NOTICE TO ASSEMBLERS; SAFETY INSTRUCTIONS; If using a ladder during assembly, use extreme caution.; Use caution when using this unit.
3 12/05 ID# M611701 IMPORTANT! Remove all contents from boxes. Be sure to check inside pole sections; hardware and additional parts are packed inside. NOTICE TO ASSEMBLERS ALL basketball systems, including those used for DISPLAYS, MUST be assembled and ballasted with sand or water according to instr...
Page 5 - PARTS LIST; Description
5 12/05 ID# M611701 PARTS LIST Item Qty. Part No. Description 1 1 206646 Tank (Black) 2 1 200628 Wheel Axle 3 2 226401 Wheel 4 1 908200 Top Pole Section 5 1 908246 Middle Pole Section with Label 6 1 900644 Bottom Pole Section Assembly 7 1 203041 Nut, Hex Flange, 3/8-16 8 1 Net 9 1 201342 Wheel Brack...
Page 7 - that will be used as a reference point in the next step.; TOP; Reference Stickers
7 12/05 ID# M611701 1. Correctly identify each pole section. Poles have an identification sticker that will be used as a reference point in the next step. 5 4 6 TOP MIDDLE BOTTOM Reference Stickers
Page 8 - HOLE; TROUGH; TROUGH; Wood Scrap
8 ID# M611701 12/05 2. IMPORTANT! ONCE POLE SECTIONS ARE POUNDED TOGETHER- THEY CANNOT BE TAKEN APART THE IDENTIFICATION STICKER ISLOCATED 5" FROM THE END OFTHE POLE. WHEN PROPERLYPOUNDED TOGETHER, THE POLESECTIONS SHOULD HAVE A 3-1/2"MINIMUM OVERLAP, LEAVING 1-1/2"BETWEEN THE OVERLAPPIN...
Page 10 - FIG B
10 ID# M611701 12/05 Attach pole assembly to tank assembly as shown. Secure pole assembly to tank and wheel bracket by turning the pole assembly clockwise as shown. Tightenpole completely and further rotate pole until struts are aligned correctly as shownin FIG B. 5. FIG B The pole should be turneda...
Page 12 - SAWHORSE OR SUPPORT TABLE
12 ID# M611701 12/05 Pole bracket (20) will need to be lightly pressed intobackboard ribbing. Be sure to press completely intoplace. Attach rim (18) to backboard (22) and polebracket (20) with knob (17), reinforcement bracket (11), and carriage bolt (16) as shown.Tighten knob completely. PRESS BRACK...
Page 14 - GALLONS OF
14 ID# M611701 12/05 10 feet (3.05 m) 15 HEIGHT AND MOVING LABELMUST NOT OBSTRUCTFACTORY ATTACHEDWARNING LABEL. 200439 11/00 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forwarduntil wheels engage withground. 2. Move basketball system to desired location. 3. Carefully rotate b...