Page 2 - WARNING
2 P/N 211446D 12/02 IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF THIS OWNERS MANUAL WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • See instructio...
Page 8 - REAR VIEW
Position U-joint of crank jack (20) as shown.Where tubes on crank jack join, hold steadyto keep both tubes from rotating. Rotatehandle clockwise on crank jack to the fullyextended position. Upright crank jack. 8 P/N 211446D 12/02 12. Secure jack brackets (17& 1 8 ) t o l o w e r h o l e s i npol...
Page 11 - RIM ASSEMBLY & INSTALLATION
11 12/02 P/N 211446D RIM ASSEMBLY & INSTALLATION WARNING 17. Install carriage bolt (41) through rim (25),washers (4) and (27) as shown. Tightennut (43) completely. Place nut (42) abouthalf-way up carriage bolt (41) as shown. 25 4 41 27 43 TWO PERSON MINIMUM REQUIRED FOR THIS PROCEDURE. NOT FOLLO...
Page 12 - NOTE
12 P/N 211446D 12/02 20. 25 39 40 Insert spacer (45) through rim assembly (25). Place rim assembly on bracket (39) so that carriage bolt (41) isinserted through hole on top of inner bracket (40). Install hex bolt (44), washers (27) and nut (42) through topholes on bracket (39) through spacer (45) as...
Page 13 - LEVELING INSTRUCTIONS:; NOTE ORIENTATION OF COVER PLATE; OUTSIDE VIEW
13 12/02 P/N 211446D 22. 23. 24. Apply logo label (33) to cover plate (31). Installcover plate (18) on rim (25) using self tappingscrews (32) as shown. LEVELING INSTRUCTIONS: Place level on rim (25) and adjust nut (42) untillevel. Tighten nut (30) to set rim tension forplaying. Secure net (34) torim...
Page 15 - ADDING HEIGHT INDICATORS
15 12/02 P/N 211446D 27. A. LOWER BACKBOARD UNTIL RIM IS 7 FEET OFF THE GROUND. B. APPLY THIN WHITE STRIP TO BOTTOM EDGE OF OUTER CRANK TUBE AS SHOWN. C. APPLY LARGE DECAL TO BACK OF POLE SO THAT 7 FOOT MARK ON LARGE DECAL IS LINED UP WITH THIN WHITE STRIP. Add height adjustment decal (35) ADDING HE...
Page 16 - Height Adjustment
16 P/N 211446D 12/02 Rotate crank handle to raise and lower backboard. NOTE: If height adjustment is difficult to operate, you mayhave over tightened the areas indicated. Refer to Step 10and Step 14. 29. Secure pole pad (36) asshown. 28. 36 Height Adjustment NOTE: Pole pad mayN O T b e i n c l u d e...
Page 17 - PARTS LIST
17 12/02 P/N 211446D Item Qty. Part No. Description 1 4 200573 J-Bolt, 5/8”-11” 2 12 265575 Nut, Hex 5/8”-11” 3 1 920880 Mounting Plate 4 8* 203470 Washer, Flat 5/8” I.D. x 1.5” O.D. 5 1 980880 Pole 6 1 200544 Pole Cap, Square 7 10* 206340 Nylon Insert Lock Nut, Hex 1/2”-13 8 8 220589 Cap, Arm Suppo...
Page 18 - HARDWARE IDENTIFIER
18 P/N 211446D 12/02 Item #41 (1) Item #24 (8) Item #30 (1) Item #32 (2) Item #28 (1) Item #23 (4) Item #42 (2) HARDWARE IDENTIFIER Item #44 (1) Item #45 (1) Item #43 (1) WARRANTY CARD: Please remember to complete your productregistration form on-line at: www.hydrarib.com/warrantycard Item #27 (5)*