Huffy 4.24C - Manuals - manualsarea.com

Page 2 - MOVING SYSTEM; SAFETY INSTRUCTIONS

2 P/N 211988B 03/03 201261 3/99 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forwarduntil wheels engage withground. 2. Move basketball system to desired location. 3. Carefully rotate basketball system upright. 4. Reattach ground restraint and check system for stability. 13 SAF...

Page 4 - FRONT

4 P/N 211988B 03/03 Get to know the basic parts of your basketball system..... FRONT STRUTS BASE WHEEL CARRIAGE ASSEMBLY EXTENSION ARM POLE

Page 5 - WARNING; FAILURE TO FOLLOW THESE

03/03 P/N 211988B 5 WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339 211239 1/98 See instruction m...

Page 7 - ASSEMBLE THE BASE

03/03 P/N 211988B 7 TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION (not actual size) SECTION A: ASSEMBLE THE BASE 9/16” and 1/2” 9/16” and 1/2” AND/OR This is what your system will look likewhen you’ve finished this section: Item #12 (1) Item #10 (10) Item #8 (5) Item #14 (2) Item #15...

Page 8 - Remove contents from tank

8 P/N 211988B 03/03 1. 1 6 5 Remove contents from tank 2. Install rod (5) through holes in bottom pole section (4) and eyebolt (6). 4 5 4 6

Page 9 - IMPORTANT! DO NOT OVER

03/03 P/N 211988B 9 8 4 5 6 3. 9 11 1 12 11 10 10 4. 2 26 26 3 3 7 Install wheel axle (2) through wheel carriage (7) and install wheels (3) ontowheel axle (2) with spacers (26) as shown. Insert pole assembly into tankassembly as shown. Secure bottom pole (4) to tank and wheel bracket asshown, a deep...

Page 11 - ASSEMBLE THE BACKBOARD; OR

03/03 P/N 211988B 11 TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION SECTION B: ASSEMBLE THE BACKBOARD 1/2” 1/2” OR This is what your system will look likewhen you’ve finished this section: Item #15 (6) Item #19 (8) Item #17 (12)* Item #29 (4)* Item #20 (4)

Page 13 - CLIP “ARM”

03/03 P/N 211988B 13 8. WARNING: Use of this product without proper installation of net clips, or when all net clips are not present could result in bodily harm. Be sureto follow directions carefully. Install net clips. CLIP “ARM” CLIP “BODY” Insert one “arm” of clip into ram as shown. Twist “body” ...

Page 14 - NET INSTALLATION

14 P/N 211988B 03/03 Insert net into bottom of clip as shown. SIDE VIEW Twist net until it snaps into position.Net must be centered through clip. NET NETCLIP SIDE VIEW NET NETCLIP NET INSTALLATION 9. 16 17 23

Page 15 - SECURING THE SYSTEM

03/03 P/N 211988B 15 1. 28 27 25 27 Place assembled unit to desired location. Fill tank with water (30 gallons/114 liters) or sand (360 lb./163 kg) and snap tank cap (23) in place. Insert T-strap (27) through slot on back of base as shown. Secure unit to ground by twisting tie down stake (25) into g...

Page 16 - APPLY HEIGHT AND MOVING LABEL; Apply Height and Moving label on pole as shown.

16 P/N 211988B 03/03 1. SECTION C: APPLY HEIGHT AND MOVING LABEL 201261 3/99 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forwarduntil wheels engage withground. 2. Move basketball system to desired location. 3. Carefully rotate basketball system upright. 4. Reattach ground res...