Hoover WindTunnel vacuum cleaner- Manuals

Page 2 - Review this manual before; Important Safeguards!; Save these instructions!; Index

Fill in and retain The model and serial number are located on the bottom of the cleaner as shown. For your personal records, please enter the COMPLETE model and serial numberin the spaces provided and retain this information. Your cleaner is model___________________________________ and has serial nu...

Page 3 - Continued; Assembling cleaner

3 STEP 1 Attach rack and handle Carton contents Remove all parts from carton and identify each itemshown. Make sure all parts are located before disposingof packing. A. Handle sectionB. Cleaner bodyC. Hose rackD. Hose, cleaning tools and wandsE. Handle bolts and nuts packet (in bag with owner’s manu...

Page 4 - STEP II Attach hose; NOTE: Hose must be connected as shown for all

Align end of hose with projections(A) over slots (B) in dirt duct. STEP II Attach hose 1-8 1-11 1-13 1-9 1-10 Place nuts in recessed areas onfront of handle. Hold each nut inplace while tightening each boltsecurely with a Phillips screw driver. Reposition bag door by fitting tabson bottom of door in...

Page 5 - Cleaner description; STEP III Position tools; Polarized plug

2. How to use Cleaner description 15. Nozzle control knob: slide knob to correct setting for height of carpet being cleaned. 16. Headlight17. Embedded Dirt FINDER™ sensitivity switch * 18. ‘Dirt FINDER’ display * 19. Check bag indicator20. Stair cleaning handle: located below lower edge of door. 21....

Page 6 - Settings; Handle positions; Handle position

Carpet heightadjustment The cleaning of carpet and rugstakes place at the nozzle (A).When it is necessary to raise andlower the nozzle for various carpetpile heights, slide the nozzle controlknob (B) to the desired setting. 2-9 Settings For maximum cleaning perfor- mance, the following carpet height...

Page 7 - Cleaning tools

7 Cleaning lightweightflexible rugs Stand on one end of rug and movecleaner toward other end or edge.Before reaching edge, push downon handle. This will lift up the nozzle(front of cleaner) as shown and willprevent rug from clinging to cleaner.Continue to lift up nozzle so thatwhen you have reached ...

Page 8 - Filter bag; When to replace; How to clean tools; Check bag indicator

8 Attach wand and tools Attach tool or wand to the hose (G). Attach second wand or tool to wand(H) by pushing it firmly onto thewand. Twist wand or tool slightly to tightenor loosen the connection. Where to buy Filter bags may be purchased fromyour Authorized Hoover Dealer,Leading Retailers, Hoover ...

Page 9 - Cleaning final filter; Cleaning secondary filter; Reattaching filter door

Cleaning final filter The final filter assists in the filtra- tion process to return clean air tothe room. To remove this filter when it be-comes dirty, open the door on theside of the cleaner. Lift out filter (B) and hand wash it incold water with mild detergent. Let filter air dry and reposition i...

Page 10 - Belt replacement; Headlight replacement; What to buy

Securing agitator Grasp agitator firmly and fit it into position by first sliding end opposite the belt into the rectangular slot (F) on side of cleaner.Pull other side of agitator (G) into place. Turn agitator making sure belt is not pinched between agitator and agita- tor shield. A B C D F G E B D...

Page 11 - How to replace; The agitator brush roll; Lubrication

How to replace Disconnect cleaner from electricaloutlet. Remove bottom plate, belt and agi- tator following directions in “The belt” section beginning with Fig. 3- 10.Discard old agitator.Continue following the directions in “The belt” section to reposition belt, new agitator and bottom plate. 11 Re...

Page 12 - problem; Clearing blockages

Full One Year Warranty (Domestic Use) Your HOOVER® appliance is warrantedin normal household use, in accordancewith the Owner’s Manual against originaldefects in material and workmanship fora period of one full year from date ofpurchase. This warranty provides, at nocost to you, all labor and parts ...