Homelite UT15550B - Manuals

Page 3 - SAVE THESE INSTRUCTIONS; GENERAL SAFETY RULES

3 WARNING: Read and understand all instructions. Failure to fol-low all instructions listed below, may result in electric shock, fire, and/or serious personal injury. SAVE THESE INSTRUCTIONS  Read these instructions and the instructions for the power head thoroughly before using tiller.  Know the ...

Page 4 - SPECIFIC SAFETY RULES

4 SPECIFIC SAFETY RULES  Rotating tines can cause severe injury, keep all body parts away from rotating tines.  Use extreme caution when reversing or pulling the machine towards you.  Always be sure of your footing; keep a firm hold on the handles and walk; never run.  If the tiller should start...

Page 6 - FEATURES

6 Fig. 1 KNOW YOUR TILLER ATTACHMENT See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating feature...

Page 7 - ASSEMBLY; UNPACKING

7 ASSEMBLY UNPACKING This product has been shipped completely assembled.  Carefully remove the items from the box. Make sure that all items listed in the packing list are included.  Inspect the product carefully to make sure no breakage or damage occurred during shipping.  Do not discard the pack...

Page 8 - ATTACHING THE J-HANDLE; OPERATION; APPLICATIONS

8 CLAMP FLAT WASHER LOCK WASHER HEX NUT BOLT (1/4-20 x 1-1/2 in.) CLAMP FRONT HANDLE BOLT (1/4-20 x 1 in.) ASSEMBLY WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety go...

Page 9 - TINE POSITION

9 OPERATION WARNING: Keep hands and feet away from the rotating tines. Rotat-ing tines will cause serious personal injury. NOTE: The tines of the tiller may rotate when the engine is started.  Move the tiller to the work area before starting the engine.  With the tiller on flat level ground, start...

Page 10 - REGULAR TINE PATTERN

10 OPERATION Fig. 6 Fig. 7 REGULAR TINE PATTERN See Figure 6. For most applications, the regular tine pattern will work best. This is the pattern set by the factory.NOTE: Pay attention to the hub position in relationship to the tines. NARROW TINE PATTERN See Figure 7. When tilling in confined areas ...

Page 11 - MAINTENANCE; GENERAL MAINTENANCE

11 MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during tool operation. If operation is dusty, also wear a dust mask. WARNING: Befo...

Page 12 - EXPLODED VIEW AND PARTS LIST

12 EXPLODED VIEW AND PARTS LIST 7 11 12 10 18 9 12 8 7 6 1 2 3 4 5 13 14 15 16 13 19 20 21 20 19 17 22

Page 14 - NOTES

Page 15 - WARRANTY; LIMITED WARRANTY STATEMENT

15 WARRANTY LIMITED WARRANTY STATEMENT Techtronic Industries North America, Inc., warrants to the original retail purchaser that this EXPAND-IT brand product is free from defect in material and workmanship and agrees to repair or replace, at Techtronic Industries North America, Inc.’s discretion, an...

Page 16 - REPAIR PARTS; OPERATOR’S MANUAL; Tiller Attachment

16 TECHTRONIC INDUSTRIES NORTH AMERICA, INC. 1428 Pearman Dairy Road Anderson, SC 29625 Phone 1-800-242-4672 983000-9342-27-06 (REV:00) SERVICE For parts or service, contact your nearest Expand-it ™ authorized service center. Be sure to provide all relevant information when you call or visit. For th...