Homelite HP155A - Manuals - manualsarea.com

Page 2 - CONTENTS; Carbon Monoxide Poisoning:; Some people are more affected by carbon; WARNING; WARNINGS

2 101568 Safety Information ......................................................................... 2 Product Identification .................................................................... 4 Unpacking ...................................................................................... 4 The...

Page 3 - Continued; Propane gas is odorless. An odor-making agent is added to propane

3 101568 SAFETY INFORMATION Continued ! WARNINGS Propane Gas: Propane gas is odorless. An odor-making agent is added to propane gas. The odor helps you detect a propane gas leak. However, the odor added topropane gas may fade. Propane gas may be present even though no odor exists. Make certain you r...

Page 4 - dealer where you bought heater.; UNPACKING

4 101568 PRODUCT IDENTIFICATION Generic LP 155 LP-PFA/PV 008B Hot AirOutlet(Front) Handle Upper Shell On/Off Switch Power Cord Hose /RegulatorAssembly InletConnector Lower Shell 1. Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached to inlet connector and hose/...

Page 5 - THEORY OF; The hose/regulator assembly attaches to the propane gas; The motor turns the fan. The fan pushes air into and around; The direct spark ignitor (DSI) sends voltage to the; The Safety Control System:; This system causes the heater to shut down if the; Figure 2 - Cross Section Operational View

5 101568 Air For Combustion And Heating Fuel THEORY OF OPERATION The Fuel System: The hose/regulator assembly attaches to the propane gas supply. The propane gas moves through the solenoid valve and out the nozzle. The Air System: The motor turns the fan. The fan pushes air into and around the combu...

Page 6 - Propane gas and propane tank(s) are to be furnished by the user.; INSTALLATION; Tighten regulator with vent pointing down. Pointing vent; Figure 3 - Regulator With Vent Pointing Down

6 101568 PROPANE SUPPLY Propane gas and propane tank(s) are to be furnished by the user. Use this heater only with a propane vapor withdrawal supply system. See Chapter5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58 and/or CAN/CGA B149.2. Your local library or fir...

Page 7 - Figure 4 - Hose and Inlet Connector; VENTILATION

7 101568 3. Connect hose to inlet connector. Tighten firmly using a wrench. IMPORTANT: Extra hose or piping may be used if needed. Install extra hose or piping between hose/regulator assembly and propane tank. You must usethe regulator supplied with heater. 4. Open propane supply valve on propane ta...

Page 8 - OPERATION; To Start Heater; into front or rear of heater.; Extension Cord Size Requirement; If not opened; To Stop Heater; remaining fuel in hose.

8 101568 OPERATION ! WARNING Review and understand the warnings in the Safety InformationSection, pages 2 and 3. They are needed to safely operate thisheater. Follow all local codes when using this heater. To Start Heater 1. Follow all installation, ventilation and safety information.2. Locate heate...

Page 9 - debris. If heater is dirty or dusty, clean heater with a damp cloth.; CAUTION; heater combustion chamber.; Item; Fan

9 101568 STORAGE PREVENTATIVE MAINTENANCE SCHEDULE MAINTENANCE 1. Keep heater clean. Clean heater annually or as needed to remove dust and debris. If heater is dirty or dusty, clean heater with a damp cloth. 2. Inspect heater before each use. Check connections for leaks. Apply mixture of liquid soap...

Page 10 - Upper Shell Removal; Remove screws along each; Figure 7 - Fan Cross Section; Figure 5 - Upper Shell Removal; Ignitor; Make sure gap between; Remove fan from

10 101568 SERVICE PROCEDURES Upper Shell Removal 1. Remove screws along each side of heater using 5/16"nut-driver. These screwsattach upper and lowershells together. 2. Lift or slide upper shell off.3. Remove fan guard. FAN CROSS SECTION LP-PFA/P 013 Figure 7 - Fan Cross Section Fan Hub Setscrew...

Page 11 - SPECIFICATIONS; Supply Pressure To Regulator; WIRING

11 101568 SPECIFICATIONS 150,000Propane Vapor Only 1.67.0 10 psiTank Pressure 13" WC9.75" WC5503,450 RPM, 1/8 HP120 V/60 Hz2.2Direct Spark, Interrupted Type.13/.15 273636 x 14.5 x 20 Output Rating (BTU/Hr)FuelFuel Consumption Gallons/HourPounds/Hour Supply Pressure To Regulator Minimum (for ...

Page 12 - ILLUSTRATED

12 101568 33 2 1 31 12 26 43 9 32 10 11 38 29 20 21 6 7 6 5 3 30 37 34 Note: Screws are standard hardware items 40 28 7 15 17 27 8 14 36 39 4 8 13 25 23 16 20 35 22 24 18 19 41 42 42 ILLUSTRATED PARTS BREAKDOWN HP155A

Page 13 - PARTS LIST

13 101568 1 01086-01 Upper Shell, Model HP155A 1 2 00529-16 Screw, #10-16 x 1/2" 8 3 A-03326-45 Combustion Chamber Kit 1 4 03326-37 Nozzle 1 5 03326-34 Ignitor 1 6 01086-32 Screw, #8-18 x 3/8" 2 7 A-03326-46 Fuel Tube Kit 1 8 03326-15 Ignitor Cable 1 9 00529-45 Heat Shield 1 10 00531-28 Fan ...

Page 14 - NOTES

14 101568 NOTES _______________________________________________________________ _______________________________________________________________ _______________________________________________________________ _______________________________________________________________ ____________________________...

Page 16 - A Subsidiary of Deere & Company; HEADQUARTERS; CUSTOMER ASSISTANCE; NETHERLANDS; AUSTRALIA; CANADIAN OFFICES

101568-01Rev. D9/97 A Subsidiary of Deere & Company inc. HEADQUARTERS HOMELITE P.O. BOX 7047 CHARLOTTE, N.C. 28241 CUSTOMER ASSISTANCE FOR THE LOCATION OF YOUR NEAREST HOMELITE SERVICING DEALER IN THEUNITED STATES, PUERTO RICO, AND THE VIRGIN ISLANDS CALL: 1-800-242-4672 NOTE: DEALER INFORMATION...