Page 2 - Listing Label Information/Location; Owner’s Manual; Homeowner Reference Information; NA; Read this manual before installing or operating this appliance.
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 2 Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location ...
Page 3 - Safety Alert Key:; • NOTICE: Used to address practices not related to personal injury.; Table of Contents; User Guide
3 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in ...
Page 4 - B. Limited Lifetime Warranty; LIMITED LIFETIME WARRANTY
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 4 B. Limited Lifetime Warranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home Technologies Inc. LIMITED LIFETIME WARRANTY Hearth & Home Technologies Inc., on behalf of its hearth brands (”HHT”), exte...
Page 5 - This warranty is void if:; QRWOLPLWHGWRLPSURSHUFKLPQH\RUYHQWLQJLQVWDOODWLRQ; LIMITATIONS OF LIABILITY:; DWLRQRIJODVV
5 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 B. Limited Lifetime Warranty (continued) 4021-645C 12-29-10 Page 2 of 2 WARRANTY CONDITIONS: 7KLVZDUUDQW\RQO\FRYHUV++7DSSOLDQFHVWKDWDUHSXUFKDVHGWKURXJKDQ++7DXWKRUL]HGGHDOHURUGLVWULEXWRU$OLVWRI ++7DXWKR...
Page 6 - Vented Gas Fireplace Heaters; Models; NOT INTENDED FOR USE AS A PRIMARY HEAT SOURCE.; Listing and Code Approvals
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 6 C. BTU Specifi cations MODELS: Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP LABORATORY: Underwriters Laboratories, Inc. (UL) TYPE: Vented Gas Fireplace Heater STANDARD: ANSI Z21.88-2009 CSA 2.33-...
Page 7 - Operating Instructions; A. Gas Fireplace Safety; WARNING; HOT SURFACES
7 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 2 2 Operating Instructions Figure 2.1 General Operating Parts B. Your Fireplace WARNING! DO NOT operate fi replace before read-ing and understanding operating instructions. Failure to operate fi replace ...
Page 9 - I. Before Lighting Fireplace; have a; Module Reset
9 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 I. Before Lighting Fireplace Before operating this fi replace for the fi rst time, have a qualifi ed technician : • Verify all shipping materials have been removed from inside and/or underneath the fi re...
Page 10 - NOT FOR USE; Final inspection by
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 10 J. Lighting Instructions (IPI) The IPI system may be operated with four AA-cell batteries. When using batteries, unplug the transformer. To prolong battery life, remove them when using the transformer. ...
Page 11 - Lighting Instructions - Standing Pilot Ignition
11 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 Lighting Instructions - Standing Pilot Ignition 1. Turn off all electric power to the appliance if ser- vice is to be performed. 2. Open control access panel. 3. Move switch to “OFF” position. 4. Push i...
Page 12 - ISSUE
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 12 Initial Break-in Procedure • The appliance should be run three to four hours continuously on high. • Turn the appliance off and allow it to completely cool. • Remove fi xed glass assembly. See Section 1...
Page 13 - Glass Cleaning; Tools Needed; Maintenance and Service; Tools needed; Remote Control
13 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 Glass Cleaning Frequency: Seasonally By: Homeowner Tools Needed : Protective gloves, glass cleaner, drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with care. Glass is breaka...
Page 15 - Burner Ignition and Operation
15 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 Figure 3.1 Standing Pilot Flame Patterns Burner Ignition and Operation Frequency: Annually By: Service Technician Tools needed: Protective gloves, vacuum cleaner, whisk broom, fl ashlight, voltmeter, in...
Page 16 - A. Typical Appliance System; Getting Started; Installer Guide
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 16 A. Typical Appliance System NOTICE: Illustrations and photos refl ect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from ...
Page 17 - Read all of the instructions before starting the instal-; C. Tools and Supplies Needed; Any such action may cause a fi re hazard.
17 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 B. Design and Installation Considerations Heat & Glo gas inserts are designed for installations into solid fuel masonry or factory built fi replaces that have been installed in accordance with the N...
Page 18 - Fireplace Size Requirements; A. Minimum Fireplace Opening; • Any smoke shelves, shields and baffl es may be removed; TOP VIEW
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 18 5 5 Fireplace Size Requirements Figure 5.1 Fireplace Opening In addition to these dimensions, also reference Clearances and Mantel Projections (Section 5.B). B A G E D C F H I MINIMUM FIREPLACE SIZE Loc...
Page 19 - B. Mantel and Wall Projections; • Use leveling legs to raise insert minimum 1/4 inch (6 mm)
19 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 B. Mantel and Wall Projections WARNING! Risk of Fire! Comply with all minimum clear-ances to combustibles as specifi ed. Framing or fi nishing material closer than the minimums listed must be construct-...
Page 20 - A. Vent Termination Minimum Clearances; Termination Locations
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 20 A. Vent Termination Minimum Clearances Roof Pitch H (Min.) Ft. Flat to 6/12...........................................................1.0*Over 6/12 to 7/12 .................................................
Page 21 - Installation Preparation; A. Inspection and Cleaning
21 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 7 7 Installation Preparation Prepare the existing solid fuel masonry or factory built non-combustible fi rebox for installation. A. Inspection and Cleaning Prior to installing the gas insert: • Have the...
Page 22 - B. Venting Components; Installing Vent Pipe and Appliance; C. Connecting Vent Pipe; • May impair safe operation of this appliance or other; Description
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 22 B. Venting Components CAUTION! Risk of Cuts/Abrasions/Flying Debris. Wear protective gloves and safety glasses during instal-lation. Sheet metal edges are sharp. The vertical vent termination system ins...
Page 23 - Placing, Securing and Leveling the; • Connect exhaust vent pipe ONLY to exhaust starting; Standing Pilot Models:
23 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 Figure 8.2 CUT AND BEND FLASHING AS NEEDED TO FIT CHIMNEY SEALANT ADHESIVE • Trim chimney top plate to minimize excess overhang or bend over fl ue tile (see Figure 8.2). • Place 3/8 inch bead of 300º F ...
Page 24 - F. Installing Adaptor and Termination Cap; Masonry; OR; Note; system REQUIRES this insulation.; Damper Flashing Kit; : Damper may have to be removed to use this kit.
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 24 F. Installing Adaptor and Termination Cap For installation of termination cap see minimum vent heights for various pitched roofs (see Figure 8.5) . To install adaptor see Figure 8.6. Roof Pitch H (Min.)...
Page 25 - • Purge should be performed by technician certifi ed by; Gas Information; • If substituting for these components, please consult; D. High Altitude Installations; Gas Pressure
25 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a qualifi ed technician (NFI certifi ed or factory-trained) using Hearth & Home Tec...
Page 26 - B. Standing Pilot Ignition System Wiring; DOES NOT; NOTICE: DO NOT wire 120 VAC to the millivolt valve! This; A. Wiring Requirements; Electrical Information; C. IntelliFire PlusTM Ignition System Wiring
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 26 B. Standing Pilot Ignition System Wiring • The standing pilot ignition system wiring DOES NOT require a 120 VAC supply to operate. • To power appliance with 120VAC to operate a fan or remote control, an...
Page 28 - D. Optional Accessories Requirements
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 28 Figure 10.4 Fan Wiring Diagram BLOWERS BLOWER RECEPTACLE BLK GRN BLK BLK GRN BLK WHT GRN BLK BLK GRN WHT BLK BLK BLK BLK PLUG INTO 120V EXISTING OUTLET TEMPERATURE SENSOR SWITCH VARIABLE SPEED CONTROL D...
Page 29 - E. Fan Wiring with Remote; F. Control Module Operation
29 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 Figure 10.5 Wiring Diagram - Fan with RC200/RC300 Remote PLUG 120V EXISTING OUTLET GRN (2) BLK (2) BLK (2) GRN (2) BLK (2) STEPS 3 & 4 WHT (2) BLOWER SPEED CONTROL (RHEOSTAT) SENSOR SWITCH STEPS 1 &...
Page 30 - Finishing; A. Mantel and Wall Projections
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 30 11 11 Finishing A. Mantel and Wall Projections WARNING! Risk of Fire! Comply with all minimum clear-ances to combustibles as specifi ed. Framing or fi nishing material closer than the minimums listed mu...
Page 31 - Appliance Setup; • Embers CANNOT be placed directly over ports. Care; • Lava rock CANNOT be placed on the burner.
31 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 A. Remove Glass Assembly See Section 12.H. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox. C. Clean the Appliance Clean/vacuum any sawdust that may hav...
Page 32 - G. Install the Log Assembly; PILOT; the log on the log support as shown.; REST NOSE
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 32 G. Install the Log Assembly Log Set Assembly: LOGS-I35 Models: GRAND-I35, GRAND-I35-SP CAUTION: Logs are fragile, handle with care. Figure 1. Log Set Installed Figure 2. Reference Points Figure 3. Log #...
Page 33 - clockwise until the end of the log contacts the grate bar.
33 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 Log #3 (SRV2205-705) : Position the log groove with the 2nd grate tine from the right. Rotate the right end of the log clockwise until the end of the log contacts the grate bar. Figure 7. Log #3 Figure ...
Page 35 - Bend the log tab into the upright position as shown in; FLAT SPOTS
35 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 G. Install the Log Assembly Log Set Assembly: LOGS-I30Models: Supreme-I30, Supreme-I30-SP, Supreme-I30AU CAUTION: Logs are fragile, handle with care. Log #1 (SRV2206-701): Bend the log tab into the upri...
Page 36 - POINTS OF LOG REST ON
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 36 2206-935B Log #3 (SRV2206-702) : Position Log #3 as shown in Figure 5. Position the grate tine groove, located on the bottom of the log, over the base of the left grate tine. Pull the log forward. The b...
Page 37 - I. Air Shutter Setting; H. Fixed Glass Assembly; Removing Fixed Glass Assembly; The glass assembly fastens to the fi replace in four; Replacing Fixed Glass Assembly; Tilt glass assembly toward fi replace and slide glass; Air Shutter Settings; NG
37 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 I. Air Shutter Setting Air shutter settings should be adjusted by a qualifi ed ser-vice technician at the time of installation. The air shutter is set at the factory for minimum vertical vent run. Adjus...
Page 38 - A. Standing Pilot Ignition System; Troubleshooting; Symptom
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 38 A. Standing Pilot Ignition System 13 13 Troubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem...
Page 40 - B. IntelliFire PlusTM Ignition System
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 40 B. IntelliFire Plus™ Ignition System Symptom Possible Cause Corrective Action 1. Pilot won’t light. The ignitor/module makes noise, but no spark. A. Incorrect wiring. Verify “S” wire (white) for sensor ...
Page 41 - Reference Materials; A. Appliance Dimension Diagram
41 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 14 14 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions. Use for reference only. Figure 14.1 Appliance Dimensions MODEL DIMENSIONS Location GRAND-I35 SUPREME-...
Page 42 - B. Vent Kits Components
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 42 Figure 14.2 Direct Vent Flex Liner Kits Figure 14.3 Direct Vent Flex Liner Accessory Kits Direct Vent Flex Liner Accessory Kits (see Figure 14.3) Flash-Damp: Zero clearance damper fl ashing kit for use ...
Page 43 - Beginning Manufacturing Date: June 2010; 5” Metal Insert; Stocked; ITEM; Log Set Assembly
43 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 C. Service Parts GRAND-I35, GRAND-I35-SP Beginning Manufacturing Date: June 2010 Ending Manufacturing Date: ______ 35” Metal Insert IMPORTANT: THIS IS DATED INFORMATION. When requesting service or repla...
Page 44 - 0” Metal Insert, IPI
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 44 IMPORTANT: THIS IS DATED INFORMATION. When requesting service or replacement parts for your appliance please provide model number and serial number. All parts listed in this manual may be ordered from a...
Page 45 - Service Parts; #19 IPI Valve Assembly
45 Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 Service Parts GRAND-I35, SUPREME-I30 Beginning Manufacturing Date: June 2010 Ending Manufacturing Date: ______ #19 IPI Valve Assembly 19.1 19.2 19.3 19.4 19.7 19.5 19.6 19.8 19.9 19.10 19.11 19.12 19.13...
Page 46 - Beginning Manufacturing Date:June 2010; #19 Standing Pilot Valve Assembly
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 46 Service Parts GRAND-I35-SP, SUPREME-I30-SP Beginning Manufacturing Date:June 2010 Ending Manufacturing Date: ______ #19 Standing Pilot Valve Assembly 19.1 19.2 19.3 19.4 19.5 19.6 19.7 19.8 19.9 19.10 I...
Page 48 - D. Contact Information; For the location of your nearest Heat & Glo dealer,; DO NOT DISCARD THIS MANUAL; NOTICE
Heat & Glo • Grand-I35, Grand-I35-SP, Supreme-I30, Supreme-I30-SP • 2206-900 Rev. K • 6/11 48 Heat & Glo, a brand of Hearth & Home Technologies Inc. 7571 215 th Street West, Lakeville, MN 55044 www.heatnglo.com D. Contact Information Please contact your Heat & Glo dealer with any que...
Heat & Glo SL-550TV-IPI-E
Manual
Heat & Glo CF750ENH
Manual
Heat & Glo ST-HV-IPI
Manual
Heat & Glo 6000GLX-IPILP-S/-R
Manual
Heat & Glo st-42tvfl
Manual
Heat & Glo 7000XLS
Manual
Heat & Glo 8000TV-OAK-IPI
Manual
Heat & Glo EM-415 - 36
Manual
Heat & Glo 350TRSILP-AUF
Manual
Heat & Glo Exclaim-50
Manual
Heat & Glo 6000 Series
Manual
Heat & Glo XLR-PLUS-N-AU
Manual
Heat & Glo 8000CFLP-OAKIPI
Manual
Heat & Glo BE-41C
Manual
Heat & Glo VRT-GY-P-AUB
Manual
Heat & Glo 6000CL-IPI-S
Manual
Heat & Glo ST-36TRLP-IPI
Manual
Heat & Glo SL-550TV-D
Manual
Heat & Glo 6000GL-IPILP-S
Manual
Heat & Glo BW36
Manual