Heat & Glo CF260E-B - Manuals

Heat & Glo CF260E-B – Manual in PDF format online.

Manuals:

Manual

Manual Heat & Glo CF260E-B

Summary

Page 2 - Location on heater:; Listing Label Information/Location; MODEL XXXX; Heater

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 2 Read this manual before installing or operating this heater. Please retain this owner’s manual for future reference. Congratulations on selecting a Heat & Glo electric ﬁ replace/insert. The insert you have selected is designed t...

Page 3 - Table of Contents; ) found in the text signifi es change in content.

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 3 Table of Contents 1 Listing and Code Approvals A. Certiﬁ cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4B. Important Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 Getting Started A. De...

Page 4 - Not intended for use as a primary heat source.; WARNING; B. Important Instructions; Standards

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 4 Fire Risk • Do not install or operate damaged heater. • Do not modify heater. • Installation other than as instructed by Hearth & Home Technologies Inc. is strictly prohibited. • Do not operate the heater without fully assemblin...

Page 5 - Getting Started; A. Design and Installation Considerations; CAUTION; C. Inspect Heater and Components; Fire Risk; B. Tools and Supplies Needed

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 5 2 Getting Started A. Design and Installation Considerations Check building codes prior to installation.• Installation MUST comply with local, regional, state and national codes and regulations. • Consult insurance carrier, local bui...

Page 6 - A. Selecting Heater Location; Electrocution Risk; heater

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 6 3 Framing and Clearances A. Selecting Heater Location Several options are available to you when choosing a loca-tion for your heater. This heater may be used as a room divider, installed along a wall, across a corner or used in an e...

Page 7 - • Comply with all minimum clearances to; M inimum and ma ximum c learanc e s must be

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 7 D B A 1 in. min. (26 mm) 9-3/4 in. (248 mm) 9-3/4 in. (248 mm) A A C 1/2 in. min. (13 mm) Figure 3.1 Heater Locations Fire Risk • Comply with all minimum clearances to combustibles as speciﬁ ed. Failure to comply may cause ﬁ re. WAR...

Page 8 - The height that a combustible mantel is

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 8 C. Frame the Heater Figure 3.2 shows a typical framing (using 2 x 4 lumber) of the heater, assuming combustible materials are used. All re-quired clearances to combustibles around the heater must be adhered to. A B (header height) 9...

Page 9 - Shock Risk; Wall Cabinet Kit,; The Cabinet must provide access to the wall outlet.; Non-Cabinet or Chase Installation; Follow all national and local electrical

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 9 4 4 Installation Sharp Edges• Wear protective gloves and safety glasses during installation. CAUTION Shock Risk Improperly grounded outlets could cause electrical shock.• Always use properly grounded, fused and polarized outlets. • ...

Page 10 - Pre-installation Preparation; Do not install any heater with damaged, in-; Installation; Decorative trim front faces have been

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 10 B. As an Insert Pre-installation Preparation This insert and its components are tested and safe when in-stalled in accordance with this manual. Report to your dealer any parts damaged in shipment, particularly the condition of the ...

Page 13 - Accessories; A. Install the Front Face; The heater is now ready for operation. See Section 7.

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 13 5 Accessories A. Install the Front Face Install the front face following the instructions packaged with the face. B. Install other Optional Accessories Installation of other optional accessories may be done at this time. The heater...

Page 14 - Finishing; A. Finishing Material; • Combustible; B. Finishing Checklist; The heater is a zero clearance fi replace and may; temperature rise and fi re hazard.

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 14 6 Finishing A. Finishing Material • Combustible Material M a ter i al whi ch is made of or surfaced wit h wo o d , compressed paper, plant ﬁ bers, plastics, or any material capable of igniting and burning, whether ﬂ ame proofed or ...

Page 16 - Troubleshooting; A. Troubleshooting Guide; Issues

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 16 8 Troubleshooting A. Troubleshooting Guide Issues Possible Causes Solutions 1. Appliance doesn’t turn on with the main switch or remote transmitter. A. Power switch is “OFF”. Turn the power switch to the “ON” position. B. Circuit b...

Page 17 - A. Access the Firebox; B. Clean the Firebox Compartment; DO NOT USE GLASS CLEANER! IT WILL; D. Replace the Light Bulbs; watt halogen bulbs with mini-candelabra base

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 17 9 Maintenance and Service Shock RiskBurn Risk Cleaning, performing maintenance or moving this electric heater without disconnecting power and allowing the heater to cool could create a shock or burn hazard.• Turn controls to “OFF”....

Page 18 - E. Maintenance Task List; Handle glass assembly with care.; When cleaning glass door:; • Avoid striking, scratching or slamming; Inspect

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 18 E. Maintenance Task List Handle glass assembly with care. When cleaning glass door: • Avoid striking, scratching or slamming glass. • Do NOT use abrasive cleaners.• Use a hard water deposit glass cleaner on white ﬁ lm. • Do NOT cle...

Page 19 - Reference Materials

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 19 10 10 Reference Materials A. Heater Dimensions 25-3/4 in. (654 mm) 23 in. (585 mm) 12-5/8 in. (321 mm) 3-1/4 in. (83 mm) 18 in. (458 mm) 18-5/8 in. (473 mm) 1 in. (26 mm) 1 in. (26 mm) 15-5/8 in. (397 mm) 9-1/4 in. (235 mm) 1/2 in....

Page 20 - B. Optional Components; Remote Control; PBT = Polished Brass Trim; Cabinets

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 20 B. Optional Components Left Right RF23E (CF230E-B)RF26E (CF260E-B) Side Refractory RC-ELEC-HNG Remote Control ON OFF 12V BATTERY COMPARTMENT FRONT BACK SIGNAL LIGHT ON/OFF BUTTONS Remote Control Refractory Trim Kits PBT23EA (CF230E...

Page 22 - Service Parts; Beginning Manufacturing Date: Apr 2005

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 22 C. Service Parts Exploded Parts DiagramCF230E-B, CF260E-B Service Parts CF230E-B, CF260E-B Beginning Manufacturing Date: Apr 2005 Ending Manufacturing Date: Active 14 13 12 11 9 6 5 4 3 2 1 10 15 18 - Log Set 16 17 19 20

Page 23 - Description of Part

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 23 Service Parts ListCF230E-B, CF260E-B Service Parts CF230E-B, CF260E-B Beginning Manufacturing Date: Apr 2005 Ending Manufacturing Date: Active # Description of Part CF230E-B CF260E-B Qty. 6 Grommet 25006 25006 1 4 Halogen Light 339...

Page 24 - This page intentionally left blank.

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 24 This page intentionally left blank.

Page 25 - WARRANTY

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 25 D. Limited Warranty WARRANTY Hearth & Home Technologies Inc. (HHT) Electric Fireplaces are tested and inspected prior to shipment and are guaranteed from defect to the purchaser of each new product. Any part which proves to be ...

Page 26 - – NOTES –; E. Contact Information; DO NOT DISCARD THIS MANUAL

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05 26 Hearth & Home Technologies Inc. 800 W. Jefferson Lake City, MN 55041 Please contact your Heat & Glo dealer with any questions or concerns. For the number of your nearest Heat & Glo dealer, please call 1-888-427-3973. – ...