Hansgrohe 14801XX1 - Manuals

Page 2 - HighArc Bar Faucets

English Technical Specification Recommended water pressure 14.7 - 7.5 PSI Recommended hot water temp. 10° - 140° F* Hole size in mounting surface 1-1/” Max. mounting surface thickness 3/8” Max. flow rate . GPM *Please know and follow all applicable local codes when setting the temperature on the wat...

Page 3 - Do not allow either hose to twist.

3 Installation Push the spout into place on the faucet. Tighten the spout set screw. Install the hot and cold supply lines to the stops with 3/8” compression fittings (included). Use two wrenches, as shown, to prevent the supply hoses from twisting. Place the faucet and sealing washer on the mount- ...

Page 5 - Allegro E Bar Faucet; Technical Specification; Recommended water pressure; Installation Considerations; water line may damage the ceramic cartridge.; English

5 Allegro E Bar Faucet 14801XX1 Technical Specification Recommended water pressure 14.7 - 7.5 PSI Recommended hot water temp. 10° - 140° F* Hole size in mounting surface 1-1/” Max. mounting surface thickness 3/8” Max. flow rate . GPM *Please know and follow all applicable local codes when setting th...

Page 6 - Turn on the water and check all connections for leaks.

6 Install the hot and cold supply hoses on the stops with 3/8” compression fittings (included). Use two wrenches, as shown, to prevent the hoses from twist- ing and becoming loosened from the faucet. Do not allow either hose to twist. Twisting the supply hose may cause it to loosen from the faucet, ...

Page 7 - Données techniques; Pression d’eau recommandée; À prendre en considération pour l’installation; Robinet de bar HighArc; Français

7 Données techniques Pression d’eau recommandée 14,7 - 7,5 psi Température recommandée pour l’eau chaude 10° – 140°F* Dimension du trou dans la surface de montage 1-1/ po Profondeur maximale de la surface de montage 3/8 po Débit , gpm max. tuyaux d’arrivée de 3/8 po - requièrent des raccords à compr...

Page 8 - Assurez-vous qu’aucun des tuyaux

8 Installation du robinet Enclenchez le bec en col de cygne sur le corps du robinet.Serrez la vis. Placez l’anneau d’étanchéité et le robinet sur la surface de montage.Installez la rondelle de plastique, la rondelle en fibre, la rondelle de friction et l’écrou de montage. Si l’épaisseur du comptoir ...

Page 10 - Allegro E Robinet de Bar

10 Données techniques Pression d’eau recommandée 14,7 - 7,5 psi Température recommandée pour l’eau chaude 10° – 140°F* Dimension du trou dans la surface de montage 1-1/ po Profondeur maximale de la surface de montage 3/8 po Débit , gpm max. * Vous devez connaître et respecter tous les codes de plomb...

Page 11 - Ouvrez l’eau. Vérifiez l’étanchéité de tous les

11 Installation du robinet 14801XX1 Placez l’anneau d’étanchéité et le robinet sur la surface de montage.Installez la rondelle en fibre, la rondelle de friction et l’écrou de montage. Serrez l’écrou de montage et les vis de serrage. Connectez les tuyaux d’arrivée d’eau chaude et d’eau froide aux tuy...

Page 12 - Replacement Parts

1 Replacement Parts 1 flange 96468XX0 nut 96461000 3 cartridge 9730000 4 aerator 13085XX0 5 connection hose 96316001 6 fixing set 95049000 7 sealing set 9646000 8 plastic washer 9753000 9 axial ring 97558000 10 screw 9766000 11 handle screw 96059000 1 seal 95008000 13 handle, Solaris 06981XX0 14 han...

Page 13 - Cleaning Recommendation for Hansgrohe Products; Recommandations pour le nettoyage des produits Hansgrohe

13 Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when c...

Page 14 - Limited Lifetime Consumer Warranty

14 Limited Lifetime Consumer Warranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either th...